Hot Racing 9.5G Brass Kmc Machete Wheel Weights, For Axial Scx24

9.5g Brass KMC Machete Wheel Weights, for Axial SCX24

Hot Racing front or rear wheel weights for the stock 1.0in KMC Machete wheels on the Axial SCX24.

Features:

CNC machined solid brass billet

9g each fitted to the wheels to decrease the vehicles center of gravity, increase its stability, improve climbing up, lower the chance for flipping in reverse, and produce a general more capable spider|spider}

Friction fit to within KMC Machete wheels. Some CA glue can be used to protect setup

Can be used either in front of rear, however if you're just getting one pair we advise using them in the front

Specifications:

Center: 12mm hex

For : AXI31615

Diameter of outer : 21.4mm

Diameter of inside : 12mm

Weight: 9.5g/ea

Width: 8mm

Frequently bought with the item that you are currently reviewing.

9G Brass Differential Cover, For Axial Scx24

9g Brass Differential Cover, for Axial SCX24

Hot Racing heavy brass cover for SCX24 Worm equipment Axles Adds 9g of weight to the axle in a low and central location to decrease the automobile's center of gravity, increase its stability, and make it an overall more capable crawler.

Features:

CNC machined solid brass billet

Adds 9g of low and main weight to lower and centralize the automobile's center of gravity, increase its stability, and make it an

Overall more capable crawler

mm increased density over stock cover for additional strength and weight

Fits either the front or rear

Specifications:

Width:14.33 mm

Height:24 mm

Weight: 9g

Want an additional great item to enhance the above discussed item?

Brass Front Steering Knuckle, For Axial Scx24

Brass Front Guiding Knuckle, for Axial SCX24

Hot Racing sturdy brass SCX24 Worm equipment Axles steering knuckles (steering blocks) for the Axial SCX24 axles. Include weight to your crawler where it requires it - down low.

Features:

CNC machined solid brass

Heavy to add weight to automobile for greater stability and lower CG

Cutouts on knuckle for access to outer bearing race for simple bearing removal

Direct replacement for factory plastic steering knuckles

Want an additional great item to enhance the above discussed item?

Brass Stock Wheels Hub, 7Mm Hex, For Scx24

Brass Stock Wheels Center, 7mm Hex, for SCX24

Functions:

CNC Machined Strong Brass construction.

You Will Receive:

4 Hex Wheel Hubs

4 2 x 6mm Axle Pins

Requirements:

Assembly onto SCX24.

Specs:

Hex: 7mm

Inner size: 4mm

Right here is a great item that lots of others have bought at the exact same time.

Aluminum Front Bumper W/Fairlead And Light Buckets, For Axial Sc

Aluminum Front Bumper w/Fairlead and Light Buckets, for Axial SCX24

Hot Racing CNC machined aluminum front bumper with 3mm LED light buckets, winch fairlead for use with Axial SCX 24.

Functions:

Billet CNC machined aluminum

Anodized a stylish flat black

Integrated brush guards

Light buckets for 3mm LED lights

Specifications:

Width: 58mm

Height: 8mm

Right here is a great item that lots of others have bought at the exact same time.



Secret Functions:
• Consists of radio system, ESC and transmitter batteries
• Consists of motor and on-board LiPo battery
• Realistic narrow-stance rock crawler body in olive green or red
• Molded roll cage with realistic light bar
• Realistic driver figure and lots of other scale details
• Officially certified KMC XD229 Machete Crawl wheels
• Officially certified Nitto Path Grappler M/T tires (S30 compound, big block tread)
• Full-time 4WD
• Splined and sleeved front and rear drive shafts enable maximum suspension travel while keeping the power to the wheels
• Steel front and rear axles, front stub axles and dogbones provide strength and toughness
• Rugged steel C-channel frame rails with bracing keep everything rigid and aligned
• Front and rear axles consist of a two-piece, molded plastic solid axle style
• 3-Link front and 4-link rear suspension supply optimum handling
• Coil-over shocks with simulated reservoir and durable plastic suspension links deliver proven Axial crawling performance
• Front and rear differentials each home a worm equipment setup to power the axles and create greater ground clearance. Worm equipment drive likewise supplies a low equipment ratio to lower torque twist
• Two LEDs in the front bumper for night driving
The SCX24™ Deadbolt™ 4WD is the very first Axial® off-roader in 1/24 scale. At less than 8” long, it’s the best rig to take along on your hiking, camping, and other outdoor and indoor experiences — offering factory-assembled ease, scale looks, and positive handling on any trail.

Even new modelers driving the SCX24 chassis will be fully equipped to tackle tough climbs and rough trails. Like the larger SCX10™ chassis, this smaller version utilizes lots of steel elements — from the C-channel frame rails to the front and rear axles and dogbones. Even over off-road, mountainous, rocky and desert surface, it has the strength to keep pressing onward and upward.

For the most reputable handling, the SCX24 chassis features a three-link front and four-link rear suspension. The combination of coil-over shocks and durable plastic suspension links provides Axial-worthy crawling performance even at this small scale. The worm equipment drive setup allows a high ground clearance plus a low equipment ratio that decreases torque twist.

Powered by an included 180-size motor and LiPo battery, the SCX24 Deadbolt shows off skills and charisma on the trails. Check out that Deadbolt body — with its narrow stance, bulging hood, realistic driver figure, and molded roll cage with realistic light bar. The realism continues right down to the ground, where you’ll discover certified KMC XD229 Machete Crawl wheels covered in Nitto Path Grappler tires.

Adding even more to its newbie appeal, the SCX24 Deadbolt comes 100% complete and all set to run. Whatever needed for action is in the box: put together and finished automobile; Axial 2-channel 2.4GHz radio system with servo and ESC/receiver system; Dynamite® 88T brushed electrical motor and 350mAh TWO 7.4V LiPo battery; USB LiPo battery charger; and even 4 AA cells for the transmitter!

What's in the Box?
(1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck
    (1) Axial AE-6 ESC/receiver combo (installed)
    (1) Dynamite® 88T brushed electrical motor (installed)
    (1) Axial AS-1 steering servo (installed)
(1) Axial® AX-4 2.4GHz 2-channel radio
(4) AA transmitter batteries
(1) 350mAh TWO 7.4V LiPo battery
(1) USB LiPo battery charger
(1) Item Manual




STEEL C-CHANNEL CHASSIS FRAME RAILS
Similar to the 1/10th scale SCX10™ platform, the SCX24™ chassis features rugged and tough steel c-channel frame rails with bracing to keep everything undamaged and aligned.
 

DYNAMITE® 88T BRUSHED MOTOR
The Dynamite 88T brushed electrical motor supplies the right amount of torque to help rise high climbs. It's mated to a steel motor install to keep flex to a minimum, which helps safeguard the gears.
 


WORM GEARS
The front and rear differentials each home a worm screw and worm equipment setup to get the power to the axles and create greater ground clearance.
 

DURABLE STEEL AXLES
Steel front and rear axles, front stub axles along with steel dogbones provide strength and toughness to keep things running throughout tough climbs and rough trails.
 


SPLINED DRIVE SHAFTS
The front and rear drive shafts are splined and sleeved to enable maximum suspension travel while keeping the power to the wheels.
 

COILOVER SHOCK ABSORBERS
Even at this small scale, the combination of coilover shocks with simulated reservoirs and durable plastic suspension links provides the crawling performance you have actually understood and expect from Axial.
 


FRONT AND REAR SOLID AXLES
The front and rear axles consist of a two piece, molded plastic solid axle style. For optimum handling, the SCX24™ suspension features a three-link front and four-link rear setup.
 


LED LIGHTS INCLUDED
Two brilliant LED lights are consisted of and are installed in the front bumper. An additional LED light port on the ESC enables you to add optional LED lights.
 

4-LINK REAR SUSPENSION
The suspension geometry makes use of a 4-Link style for the rear which is enhanced to lower axle steer and torque twist. We have actually likewise consisted of extra suspension links for adjusting your wheelbase length.
 


KMC XD229 MACHETE CRAWL WHEELS & NITTO TRAIL GRAPPLER M/T TIRES
Officially certified KMC XD Machete wheels are famous in the off-road world. They are molded in black and feature sensational scale details, regardless of the small scale.
The formally licensed Nitto Path Grappler M/T Tires offer a fantastic mix of off-road performance while still maintaining excellent composure for on-road use.
 

HINGED BODY SYSTEM
The hinged body system uses simple access to on-board elements. You can rapidly reach the battery and chassis by removing just 2 body clips and swinging the body up.
 


FULL BALL BEARINGS
Even if the SCX24™ is smaller in size does not suggest the features require to do the same. No bushings found here, rather the drivetrain is easily spinning on sealed cartridge bearings throughout the entire automobile.
 

AXIAL AS-1 SERVO
Installed just above the front axle is the Axial AS-1 servo, with a servo saver that permits steering precision, while likewise providing protection for the servo gears in the event of a bind or effect.
 

Specifications

Type: Spider
Scale: 1/24
Length: 7.8" (199.5mm)
Width: 3.9" (99.5mm)
Height: 4.73" (120.2mm)
Ground Clearance: 1.06" (27mm)
Wheelbase: 5.25" (133.5mm)
Weight: 0.5lb (0.22kg)
Chassis: Stamped steel rails
Suspension: Strong axle, front and rear
Drivetrain: 4WD
Tire Type: Nitto Path Grappler M/T, big block tread
Speed Control: AE-6 ESC receiver/combo
Radio: AX-4 2.4GHz 2-channel
Servos: AS-1 steering servo
Batteries: 7.4V 350mAh 30C LiPo (consisted of)
Battery charger: USB LiPo battery charger (consisted of)
Gear Pitch: 32-Pitch
Wheel Size: 0.48" (12.4mm) width, 1.0" (26mm) size
Kit/RTR: RTR
Shock Type: Plastic body coil-over .9 - 1.3" (24 - 33.4mm)
Body: Painted and trimmed Axial Deadbolt
Ball Bearings: Complete body
Is Assembly Required: No