Axial SCX24 Deadbolt 1/24th Scale Elec 4WD - RTR, Red

Key Features:
• Includes radio system, ESC and transmitter batteries
• Includes motor and on-board LiPo battery
• Realistic narrow-stance rock spider body in olive green or red
• Molded roll cage with reasonable light bar
• Realistic driver figure and numerous other scale information
• Officially certified KMC XD229 Machete Crawl wheels
• Officially certified Nitto Trail Grappler M/T tires (S30 compound, large block tread)
• Full-time 4WD
• Splined and sleeved front and rear drive shafts permit optimal suspension travel while keeping the power to the wheels
• Steel front and rear axles, front stub axles and dogbones provide strength and resilience
• Rugged steel C-channel frame rails with bracing keep whatever stiff and aligned
• Front and rear axles include a two-piece, molded plastic strong axle design
• 3-Link front and 4-link rear suspension supply optimum handling
• Coil-over shocks with simulated reservoir and long lasting plastic suspension links provide proven Axial crawling efficiency
• Front and rear differentials each house a worm equipment setup to power the axles and produce greater ground clearance. Worm equipment drive likewise supplies a low equipment ratio to minimize torque twist
• Two LEDs in the front bumper for night driving
The SCX24™ Deadbolt™ 4WD is the very first Axial® off-roader in 1/24 scale. At less than 8” long, it’s the ideal rig to bring on your hiking, camping, and other outside and indoor adventures — offering factory-assembled ease, scale looks, and confident handling on any trail.

Even new modelers driving the SCX24 chassis will be fully equipped to deal with tough climbs and rough trails. Like the bigger SCX10™ chassis, this smaller sized version utilizes a lot of steel parts — from the C-channel frame rails to the front and rear axles and dogbones. Even over off-road, mountainous, rocky and desert surface, it has the strength to keep pressing onward and upward.

For the most reliable handling, the SCX24 chassis includes a three-link front and four-link rear suspension. The combination of coil-over shocks and long lasting plastic suspension links provides Axial-worthy crawling efficiency even at this small scale. The worm equipment drive setup permits a high ground clearance plus a low equipment ratio that decreases torque twist.

Powered by an included 180-size motor and LiPo battery, the SCX24 Deadbolt shows off skills and charm on the trails. Check out that Deadbolt body — with its narrow position, bulging hood, reasonable driver figure, and molded roll cage with reasonable light bar. The realism continues right down to the ground, where you’ll discover certified KMC XD229 Machete Crawl wheels wrapped in Nitto Trail Grappler tires.

Adding even more to its beginner appeal, the SCX24 Deadbolt comes 100% total and all set to run. Everything needed for action remains in package: assembled and finished lorry; Axial 2-channel 2.4GHz radio system with servo and ESC/receiver unit; Dynamite® 88T brushed electrical motor and 350mAh TWO 7.4V LiPo battery; USB LiPo battery charger; and even four AA cells for the transmitter!

What's in the Box?
(1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck
    (1) Axial AE-6 ESC/receiver combo (installed)
    (1) Dynamite® 88T brushed electrical motor (installed)
    (1) Axial AS-1 steering servo (installed)
(1) Axial® AX-4 2.4GHz 2-channel radio
(4) AA transmitter batteries
(1) 350mAh TWO 7.4V LiPo battery
(1) USB LiPo battery charger
(1) Item Handbook




STEEL C-CHANNEL CHASSIS FRAME RAILS
Similar to the 1/10th scale SCX10™ platform, the SCX24™ chassis functions rugged and durable steel c-channel frame rails with bracing to keep whatever intact and aligned.
 

DYNAMITE® 88T BRUSHED MOTOR
The Dynamite 88T brushed electrical motor supplies the correct amount of torque to help ascend high climbs. It's mated to a steel motor install to keep flex to a minimum, which helps secure the equipments.
 


WORM GEARS
The front and rear differentials each house a worm screw and worm equipment setup to get the power to the axles and produce greater ground clearance.
 

DURABLE STEEL AXLES
Steel front and rear axles, front stub axles along with steel dogbones provide strength and resilience to keep things running during tough climbs and rough trails.
 


SPLINED DRIVE SHAFTS
The front and rear drive shafts are splined and sleeved to permit optimal suspension travel while keeping the power to the wheels.
 

COILOVER SHOCK ABSORBERS
Even at this small scale, the combination of coilover shocks with simulated tanks and long lasting plastic suspension links provides the crawling efficiency you've known and anticipate from Axial.
 


FRONT AND REAR SOLID AXLES
The front and rear axles include a two piece, formed plastic strong axle design. For optimum handling, the SCX24™ suspension includes a three-link front and four-link rear setup.
 


LED LIGHTS INCLUDED
Two intense LED lights are consisted of and are mounted in the front bumper. An extra LED light port on the ESC enables you to include optional LED lights.
 

4-LINK REAR SUSPENSION
The suspension geometry uses a 4-Link design for the back which is optimized to minimize axle guide and torque twist. We've likewise consisted of extra suspension links for adjusting your wheelbase length.
 


KMC XD229 MACHETE CRAWL WHEELS & NITTO TRAIL GRAPPLER M/T TIRES
Officially certified KMC XD Machete wheels are legendary in the off-road world. They are formed in black and feature sensational scale information, despite the small scale.
The formally licensed Nitto Trail Grappler M/T Tires use a wonderful blend of off-road efficiency while still retaining exceptional composure for on-road usage.
 

HINGED BODY SYSTEM
The hinged body system provides simple access to on-board parts. You can quickly reach the battery and chassis by getting rid of just 2 body clips and swinging the body up.
 


FULL BALL BEARINGS
Even if the SCX24™ is smaller sized in size does not imply the functions need to follow suit. No bushings discovered here, rather the drivetrain is freely spinning on sealed cartridge bearings throughout the entire lorry.
 

AXIAL AS-1 SERVO
Mounted just above the front axle is the Axial AS-1 servo, with a servo saver that permits steering precision, while likewise offering defense for the servo equipments in case of a bind or impact.
 

Specs

Type: Crawler
Scale: 1/24
Length: 7.8" (199.5mm)
Width: 3.9" (99.5mm)
Height: 4.73" (120.2mm)
Ground Clearance: 1.06" (27mm)
Wheepoundase: 5.25" (133.5mm)
Weight: 0.5lb (0.22kg)
Chassis: Stamped steel rails
Suspension: Strong axle, front and rear
Drivetrain: 4WD
Tire Type: Nitto Trail Grappler M/T, large block tread
Speed Control: AE-6 ESC receiver/combo
Radio: AX-4 2.4GHz 2-channel
Servos: AS-1 steering servo
Batteries: 7.4V 350mAh 30C LiPo (consisted of)
Charger: USB LiPo battery charger (consisted of)
Gear Pitch: 32-Pitch
Wheel Size: 0.48" (12.4mm) width, 1.0" (26mm) size
Kit/RTR: RTR
Shock Type: Plastic body coil-over .9 - 1.3" (24 - 33.4mm)
Body: Painted and cut Axial Deadbolt
Ball Bearings: Complete body
Is Assembly Required: No