Axial SCX24 Deadbolt 1/24th Scale Elec 4WD - RTR, Green

Key Functions:
• Includes radio system, ESC and transmitter batteries
• Includes motor and on-board LiPo battery
• Practical narrow-stance rock spider body in olive green or red
• Molded roll cage with reasonable light bar
• Practical driver figure and many other scale details
• Formally certified KMC XD229 Machete Crawl wheels
• Formally certified Nitto Path Grappler M/T tires (S30 compound, big block tread)
• Full-time 4WD
• Splined and sleeved front and rear drive shafts enable maximum suspension travel while keeping the power to the wheels
• Steel front and rear axles, front stub axles and dogbones supply strength and durability
• Rugged steel C-channel frame rails with bracing keep everything stiff and lined up
• Front and rear axles include a two-piece, molded plastic strong axle design
• 3-Link front and 4-link rear suspension supply optimum handling
• Coil-over shocks with simulated tank and long lasting plastic suspension links provide proven Axial crawling efficiency
• Front and rear differentials each home a worm gear setup to power the axles and develop higher ground clearance. Worm gear drive likewise provides a low gear ratio to reduce torque twist
• 2 LEDs in the front bumper for night driving
The SCX24™ Deadbolt™ 4WD is the very first Axial® off-roader in 1/24 scale. At less than 8” long, it’s the perfect rig to take along on your hiking, camping, and other outdoor and indoor experiences — offering factory-assembled ease, scale looks, and positive handling on any trail.

Even new modelers driving the SCX24 chassis will be fully equipped to deal with hard climbs and rough trails. Like the bigger SCX10™ chassis, this smaller variation utilizes plenty of steel elements — from the C-channel frame rails to the front and rear axles and dogbones. Even over off-road, mountainous, rocky and desert surface, it has the strength to keep pushing onward and upward.

For the most dependable handling, the SCX24 chassis includes a three-link front and four-link rear suspension. The combination of coil-over shocks and long lasting plastic suspension links delivers Axial-worthy crawling efficiency even at this little scale. The worm gear drive setup permits a high ground clearance plus a low gear ratio that lowers torque twist.

Powered by an included 180-size motor and LiPo battery, the SCX24 Deadbolt flaunts proficiency and charisma on the trails. Take a look at that Deadbolt body — with its narrow stance, bulging hood, reasonable driver figure, and molded roll cage with reasonable light bar. The realism continues right down to the ground, where you’ll find certified KMC XD229 Machete Crawl wheels covered in Nitto Path Grappler tires.

Adding even more to its beginner appeal, the SCX24 Deadbolt comes 100% complete and prepared to run. Whatever required for action is in the box: assembled and completed automobile; Axial 2-channel 2.4GHz radio system with servo and ESC/receiver system; Dynamite® 88T brushed electric motor and 350mAh 2S 7.4V LiPo battery; USB LiPo battery charger; and even 4 AA cells for the transmitter!

What's in package?
(1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck
    (1) Axial AE-6 ESC/receiver combo (installed)
    (1) Dynamite® 88T brushed electric motor (installed)
    (1) Axial AS-1 steering servo (installed)
(1) Axial® AX-4 2.4GHz 2-channel radio
(4) AA transmitter batteries
(1) 350mAh 2S 7.4V LiPo battery
(1) USB LiPo battery charger
(1) Product Handbook




STEEL C-CHANNEL CHASSIS FRAME RAILS
Much like the 1/10th scale SCX10™ platform, the SCX24™ chassis features rugged and sturdy steel c-channel frame rails with bracing to keep everything intact and lined up.
 

DYNAMITE® 88T BRUSHED MOTOR
The Dynamite 88T brushed electric motor provides the right amount of torque to assist ascend high climbs. It's mated to a steel motor install to keep flex to a minimum, which assists safeguard the gears.
 


WORM GEARS
The front and rear differentials each home a worm screw and worm gear setup to get the power to the axles and develop higher ground clearance.
 

DURABLE STEEL AXLES
Steel front and rear axles, front stub axles in addition to steel dogbones supply strength and durability to keep things running during hard climbs and rough trails.
 


SPLINED DRIVE SHAFTS
The front and rear drive shafts are splined and sleeved to enable maximum suspension travel while keeping the power to the wheels.
 

COILOVER SHOCK ABSORBERS
Even at this little scale, the combination of coilover shocks with simulated reservoirs and long lasting plastic suspension links delivers the crawling efficiency you have actually understood and expect from Axial.
 


FRONT AND REAR SOLID AXLES
The front and rear axles include a two piece, formed plastic strong axle design. For optimum handling, the SCX24™ suspension includes a three-link front and four-link rear setup.
 


LED LIGHTS INCLUDED
2 brilliant LED lights are consisted of and are installed in the front bumper. An additional LED light port on the ESC enables you to include optional LED lights.
 

4-LINK REAR SUSPENSION
The suspension geometry utilizes a 4-Link design for the rear which is enhanced to reduce axle guide and torque twist. We have actually likewise consisted of additional suspension links for changing your wheelbase length.
 


KMC XD229 MACHETE CRAWL WHEELS & NITTO TRAIL GRAPPLER M/T TIRES
Formally certified KMC XD Machete wheels are famous in the off-road world. They are formed in black and feature spectacular scale details, regardless of the little scale.
The officially certified Nitto Path Grappler M/T Tires use a fantastic blend of off-road efficiency while still maintaining excellent composure for on-road use.
 

HINGED BODY SYSTEM
The hinged body system provides simple access to on-board elements. You can rapidly reach the battery and chassis by removing just two body clips and swinging the body up.
 


FULL BALL BEARINGS
Even if the SCX24™ is smaller in size does not mean the features require to do the same. No bushings found here, instead the drivetrain is easily spinning on sealed cartridge bearings throughout the entire automobile.
 

AXIAL AS-1 SERVO
Mounted just above the front axle is the Axial AS-1 servo, with a servo saver that allows for steering precision, while likewise providing protection for the servo gears in case of a bind or impact.
 

Specifications

Type: Spider
Scale: 1/24
Length: 7.8" (199.5mm)
Width: 3.9" (99.5mm)
Height: 4.73" (120.2mm)
Ground Clearance: 1.06" (27mm)
Wheelbase: 5.25" (133.5mm)
Weight: 0.5lb (0.22kg)
Chassis: Stamped steel rails
Suspension: Strong axle, front and rear
Drivetrain: 4WD
Tire Type: Nitto Path Grappler M/T, big block tread
Speed Control: AE-6 ESC receiver/combo
Radio: AX-4 2.4GHz 2-channel
Servos: AS-1 steering servo
Batteries: 7.4V 350mAh 30C LiPo (consisted of)
Charger: USB LiPo battery charger (consisted of)
Gear Pitch: 32-Pitch
Wheel Size: 0.48" (12.4mm) width, 1.0" (26mm) diameter
Kit/RTR: RTR
Shock Type: Plastic body coil-over .9 - 1.3" (24 - 33.4mm)
Body: Painted and cut Axial Deadbolt
Ball Bearings: Complete body
Is Assembly Required: No