Hitec Universal Servo Grease

This is for use with all producers' servo gear sets.
To use, merely disassemble servo, throughly clean all old grease off gears, and
utilize new grease moderately during reassembly.
The grease (.1 oz) can be found in a small toothpaste-like metal tube.

DEE
8.Oct.97

You will certainly enjoy this item if you have the item above stated.

Servo Gear Set #2070/2075

This is the replacement Gear Set for the 2070 & 2075 Servo.

FEATURES:
Total gear set for the Traxxas 2070 (TRAM2070) or 2075 servo

CONSISTS OF:
Four servo gears and bearings and instruction sheet

REQUIRES:
Installation on the 2070 or 2075 Traxxas servo

This is a fantastic addition to the item presently being talked about.

DS415M Servo Gear

Usage for DS415M/416M servo.
also utilized for HSD41601

Specs:
DS415M gear G1x1
DS415M the gear G2x1
DS415M gear G3x1
DS415M gear G4x1
DS415M gear G5x1

The listed below item also sets actually well with the item being talked about.

Tank Filter, 5 Grams

This is a Tank Filter from Dubro.

FEATURES:
A combination clunk-type weight and fuel filter.
Made of sintered bronze to provide the supreme in fuel filtration.
Can be utilized with gas or radiance fuel.
Designed to fit all clunk tanks.

INCLUDES:
One Tank Filter.

REQUIRES:
Clunk-type fuel tank

SPECS:
Length: 1"

This is a fantastic addition to the item presently being talked about.

Slant Thread Main Drive Gear/121T

Usage for T-REX 450 Series.
Should with::H45157 Motor Pinion Helical Gear 12T.

Specs:
CNC M0.6 Slant Thread Main drive gear(121T) x 3
Weight:35.3g
Brand-new style high strength 121 tooth Mod 0.6 helical primary hear for 450 size helis. The boost gear pitch can endure greater power, at the exact same time reduce functional noise. An excellent upgrade to endure the modern-day high power system.
Utilizes high strength polymer plastic with exceptional rigidity and flexibility characteristics.
Patented distinct built in fan design to create induced air circulation, effectively cooling electronics and motor.
Gear ratio 1:10.08.

Below is a excellent item that lots of others have actually purchased the same time.

Glow Plug S-Dty Long/Med

This is the Traxxas Super Responsibility Long Glowplug.

FEATURES:
Suitable for all Traxxas engines including the 2.5, 2.5R and 3.3 engines
Suited for the varied throttle variety of off-road racing
Medium heat variety

CONSISTS OF:
One Traxxas Medium Heat Variety Super Responsibility Long Glowplug with gasket

REQUIRES:
Plug wrench (HCAP2550) for installing in cylinder head
Glow Fuel with 10%-20% nitro material

This item is regularly gotten with the above mentioned item.

Air Filter Stampede

This is the Replacement Air Filter Aspect for the Traxxas Nitro Stampede.
    This element is located in the rubber air filter body.

FEATURES:
Pre-oiled

CONSISTS OF:
One air filter element.

REQUIRES:
Absolutely nothing. This is a direct replacement part.

SPECS:
Size: 30mm (1.18")
Height: 17.5mm (0.69")

COMMENTS:
For the complete air filter with rubber body, use TRAC4060.
The rubber filter body is not offered independently.