Dubro Tank Filter, 5 Grams

This is a Tank Filter from Dubro.

FEATURES:
A mix clunk-type weight and fuel filter.
Made of sintered bronze to provide the supreme in fuel filtration.
Can be used with gas or glow fuel.
Designed to fit all clunk tanks.

INCLUDES:
One Tank Filter.

REQUIRES:
Clunk-type fuel tank

SPECS:
Length: 1"

Regularly acquired with the thing that you are currently reviewing.



This is a 12.5x6 aircraft propeller. It is a "tractor" (not a "pusher") prop.

FEATURES:
Computer-optimized design gives these props a thinner profile and
    more "bite" with less noise.
Lightweight molded nylon building lowers rotating mass
    for higher output and longer life.
Reinforcing carbon fibers assist maintain true, consistent pitch
    at any rpm.
"C2" design.

INCLUDES:
One carbon-reinforced NYLON propeller

NEEDS:
ALL props need balancing, this is EXTREMELY IMPORTANT, utilize TOPQ5700.
May requirement prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Length: 12.5" Pitch: 6
Thickness at hub: 1/2" Hole diameter: 1/4"

Want an additional excellent thing to match the above pointed out thing?

Glow Plug S-Dty Long/Med

This is the Traxxas Super Task Long Glowplug.

FEATURES:
Suitable for all Traxxas engines consisting of the 2.5, 2.5R and 3.3 engines
Fit for the varied throttle range of off-road racing
Medium heat range

CONSISTS OF:
One Traxxas Medium Heat Variety Super Task Long Glowplug with gasket

NEEDS:
Plug wrench (HCAP2550) for setting up in cylinder head
Glow Fuel with 10%-20% nitro material

Want an additional excellent thing to match the above pointed out thing?

Air Filter Stampede

This is the Replacement Air Filter Component for the Traxxas Nitro Stampede.
    This aspect is located in the rubber air filter body.

FEATURES:
Pre-oiled

CONSISTS OF:
One air filter element.

REQUIRES:
Absolutely nothing. This is a direct replacement part.

SPECS:
Size: 30mm (1.18")
Height: 17.5mm (0.69")

REMARKS:
For the complete air filter with rubber body, usage TRAC4060.
The rubber filter body is not offered independently.

Below is a excellent thing that several others have bought at the very same time.

Universal Servo Grease

This is for usage with all producers' servo gear sets.
To usage, just dismantle servo, throughly clean all old grease off gears, and
utilize brand-new grease sparingly during reassembly.
The grease (.1 oz) can be found in a little toothpaste-like metal tube.

DEE
8.Oct.97

Below is a excellent thing that several others have bought at the very same time.

Servo Extension 6

This is a 6" Servo Extension by Hitec.

FEATURES:
This allows you to extend the distance between your
    receiver and servo.

INCLUDES:
(1) Extension

NEEDS:
Setup

SPECS:
Length: 6" (152mm)

REMARKS:
Wire color code: Hitec-
Black: negative
Red: positive
Yellow: signal

This thing is regularly acquired with the above pointed out thing.



This is an In-Line Fuel Filter for Nitro Applications from Dubro.
This part links inbetween the fuel tank and carburetor.

FEATURES:
Natural aluminum color
Filter body seperates to get rid of and clean filtering mesh

CONSISTS OF:
One assembled fuel filter

NEEDS:
Setting up with conventional fuel tubing attached to each end.

SPECS:
Length: 29mm (1.15")
External diameter: 10.5mm (0.41")

REMARKS:
The length of the filter is measured from pointer to tip, not the primary
    body of the filter.