Dubro 2 1/2" Super Lite Wheels

These are 2-1/2" Super Lite Wheels from Dubro.

FEATURES:
Black impact-absorbing foam building pre-mounted.
Gray plastic 8 spoke rims.
Five Rib tread design.

INCLUDES:
Two 2-1/2" Super Lite Pre-mounted Wheels

NEEDS:
Wheel collars to hold them on the axle.
May require reaming out the hole to mount on bigger axle.

SPECS:
Diameter: 63.5mm (2-1/2") O.D.
Axle diameter: 4.4mm (.175")
Overall width: 20mm (.788")
Weight: 9.65 grams each

This is a wonderful enhancement to the thing presently being gone over.

2" Super Lite Wheels

These are 2" Super Lite Wheels from Dubro.

FEATURES:
Black effect soaking up foam building pre-mounted.
Gray plastic 8 spoke rims.
Seven rib tread design.

INCLUDES:
Two 2" Super Lite Pre-mounted Wheels

NEEDS:
Wheel collars to hold them on the axle.
May require reaming out the hole to mount on bigger axle.

SPECS:
Diameter: 50.8mm (2")
Axle Diameter: 3.5mm (.141")
Width: 17.4mm (.686")
Weight: 5.22 grams each wheel

You will love this product if you have the product previously discussed.

1/8" Nickel Plated Dura Collars

These are 1/8" Nickel Plated Brass Dura-Collars.

FUNCTIONS:
Nickel plated brass construction.

INCLUDES:
4 collars
4 4-40 x1/8" set screws
One .050" allen wrench

NEEDS:
Installation.

SPECS:
Length: .189"
Diameter: 1/8" ID .281 OD

This thing compliments the main item here.

9x6 Thin Electric Prop

This is one R/C Plane 9x6E APC Thin-Electric Composite Propeller
by Landing Products.

FEATURES:
APC props are produced utilizing a pultrusion procedure. This technique
    ca{uses|triggers} the fiberglass "fibers" to be oriented axially in 1/2" long
    pellets, permitting for a higher fiber (60%) to resin (nylon binder)
    density. Providing substantially greater strength and stiffness than
    glass filled nylon.
The extra stiffness is beneficial to control of vibration
    resonance response.
The greater strength permits the usage of thinner cross-sections,
    beneficial to weight and aerodynamic efficiency.
Competition proven.
Dark gray composite material.

INCLUDES:
One APC Thin-Electric Propeller

NEEDS:
ALL props require balancing (usage TOPQ5700).
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric).

SPECS:
Prop Diameter: 9"
Prop Pitch: 6
Hub Density: 0.40"
Hub Diameter: 0.79"
Weight: 0.035lbs
Engine Shaft Diameter: N/A

COMMENTS:
Not for use with radiance engines.