Dubro 1/8" Nickel Plated Dura Collars

These are 1/8" Nickel Plated Brass Dura-Collars.

FUNCTIONS:
Nickel plated brass construction.

INCLUDES:
4 collars
4 4-40 x1/8" set screws
One .050" allen wrench

REQUIRES:
Installation.

SPECS:
Length: .189"
Diameter: 1/8" ID .281 OD

The below thing also sets really well with the thing being reviewed.

3/32" Nickel Plated Dura Collars

These are 3/32" Nickel Plated Brass Dura-Collars.

FUNCTIONS:
Nickel plated brass construction.

INCLUDES:
4 collars
4 4-40 x1/8" set screws
One .050" allen wrench

REQUIRES:
Installation.

SPECS:
Length: .189"
Diameter: 3/32" ID .248 OD

This thing is frequently purchased with the above stated thing.

1/16" Nickel Plated Dura Collars

These are 1/16" Nickel Plated Brass Dura-Collars.

FUNCTIONS:
Nickel plated brass construction

CONSISTS OF:
4 collars
4 4-40 x1/8" set screws
One .050" allen wrench

REQUIRES:
Installation required.

SPECS:
Length: .189"
Diameter: 1/16" ID .219 OD

Many others have actually purchased this thing in addition to the thing that you are currently reading about.

EC3 Device & Battery Connector


Functions



Capable of 60 constant ampsErgonomically pleasing and easy to gripProtected to prevent shorting and reverse polaritySuperior innovation matched to today's sophisticated applicationsConnectors are factory-installed with ParkZone® F-27C Stryker, E-flite PNP aircraft,Developed with benefit and reliability in mind




Introduction


E-flite's high-quality EC3 connectors and leads need to be a staple for each workbench. EC3 (E-flite Port 3.5mm) connectors, leads with connectors, and devices are perfect for electric power applications and deal with any battery, charger, ESC, Power Meter, etc.

This is a wonderful addition to the thing currently being reviewed.

Gold Plated Bullet Connector Female 3.5mm (3)

Developed for use with 3 wire Brushless motor systems, this is
the 3.5mm Gold Bullet Port Female from Fantastic Planes.

FEATURES:
Gold plated
Fits wire diameter up to 3.5mm

CONSISTS OF:
3 female bullet connectors

REQUIRES:
Solder and soldering iron - HCAR0776 and STAR2000

SPECIFICATIONS:
Length: .51" (13mm)
Diameter: .14" (3.5mm) inside (where the wire is soldered to)
Diameter: .17" (4.25mm) outside

REMARKS:
For the 3.5mm male adapter order GPMM3112

Right here is one more thing that praises the thing being reviewed.

2" Super Lite Wheels

These are 2" Super Lite Wheels from Dubro.

FEATURES:
Black effect absorbing foam construction pre-mounted.
Gray plastic eight spoke rims.
Seven rib tread design.

INCLUDES:
Two 2" Super Lite Pre-mounted Wheels

REQUIRES:
Wheel collars to hold them on the axle.
May need reaming out the hole to mount on bigger axle.

SPECS:
Diameter: 50.8mm (2")
Axle Diameter: 3.5mm (.141")
Width: 17.4mm (.686")
Weight: 5.22 grams each wheel

Right here is one more thing that praises the thing being reviewed.

2 1/2" Super Lite Wheels

These are 2-1/2" Super Lite Wheels from Dubro.

FEATURES:
Black impact-absorbing foam construction pre-mounted.
Gray plastic eight spoke rims.
Five Rib tread design.

INCLUDES:
Two 2-1/2" Super Lite Pre-mounted Wheels

REQUIRES:
Wheel collars to hold them on the axle.
May need reaming out the hole to mount on bigger axle.

SPECS:
Diameter: 63.5mm (2-1/2") O.D.
Axle diameter: 4.4mm (.175")
Total width: 20mm (.788")
Weight: 9.65 grams each