Axial Steering Upgrade Kit

This is the Steering Upgrade Set by Axial
for use on Axial AX10 and SCX10.

FEATURES:
Changes the stock plastic steering links
This kit will increase steering strength and accuracy

INCLUDES:
Plastic linkage set
Two aluminum linkage rods
Installing hardware
Detailed guidelines

NEEDS:
Installation on design

Numerous others have actually acquired this item in addition to the item that you are presently reviewing.

Aluminum Servo Horn 25T

This is the Axial 25T Aluminum Servo Horn for Futaba, Axial and Savox Servos.

FEATURES:
Hard anodized aluminum construction
Compression mount, 2 screws install on either side of arm and
    tighten center hole around servo spline

INCLUDES:
Axial 25T Aluminum Servo Horn
Two 2x8mm socket head screws

SPECIFICATIONS:
Length: 0.98" (25mm) from center of servo mounting hole to end of arm
Hole Diameter: 3mm
Pitch:3x30

The listed below item also pairs truly well with the item being talked about.



Racers Edge 25C 5000 mAh 2S1P LI-Poly Battery hardwired with Deans Ultra Plug. Racers Edge battery is lighter than traditional Ni-Cd or Ni-Mh batteries while providing enhanced efficiency and run times. It utilizes the exact same balancing connection as Align or Electrifly battery chargers. Make certain to utilize a voltage cut off if your speed control doesn't come geared up with one. ONLY USE A BATTERY CHARGER PARTICULARLY FOR Li-Poly cells!!!

This is a superb addition to the item presently being talked about.



    This is the Icon 61-90mm Aluminum Shock Set from Axial.

FEATURES:
Suitable with shocks utilized on the Axial SCX10 chassis
CNC machined pistons, shock bodies and reservoirs for accurate fit
Clear layered sleek aluminum bodies with faux oil reservoirs
Polyoxymethylene - (POM/thermoplastic) pistons for smooth action
Titanium nitride covered shafts
Double rate springs
Steel ball studs, and all assembly hardware
Rebuildable
Totally accredited by Icon Car Characteristics

INCLUDES:
All parts to build 2 Icon 61-90mm Aluminum Shocks
Instruction Sheet

NEEDS:
Shock oil of modeler's option

Regularly acquired with the item that you are presently reviewing.



This is the Electric Powered, 2.4GHz Radio Controlled, 1/10 scale
Prepared to Run SCX10 Deadbolt Rock Crawler Truck from Axial.

**Added Technical Information Will Be Included When It Becomes Available.**

FEATURES:
Chassis: Scale steel C-channel with cross bracing for reinforcement
    and put together with hex hardware
Drive: 4 wheel shaft with WB8 swine driveshafts and continuous
    velocity joint design
Diff Locker: One-piece sintered metal construction decreases slop in
    drive train by eliminating cross pin
Radio: AX-3 2-channel 2.4GHz with high torque 151 oz/in metal gear
    Method TSX45 servo
ESC: AE-5 LiPo compatible with forward, reverse and drag brake
    function, waterproof and 3S LiPo compatible
Motor: 27T brushed motor
Pinion Gear: 32 pitch
Shocks: Oil filled single rate with reasonable looking non-functional
    coilover shock tank, plastic body
Transmission: Created to position motor weight as low as possible
    to maintain a low CG, adjustable ratio from 15:1 - 74:1, dual
    slipper clutch with 32 pitch gearing for high torque applications
    enables transmission to insinuate hard goings
Body: Deadbolt design with painted hood cowl, interior, scale helmet,
    decals and fuel cell
Wheels: 1.9" broad Walker Evans, nylon construction, black in
    color, 12mm hex
Tires: Maxxis Trepador R35 sticky compound 1.43" (36mm) broad, 4.6"
    (117mm) diameter
Rear Suspension: 4-link optimized to decrease axle guide and torque
    twist
Front Bumper: Formally licensed Poison Spyder Rock Brawler with
    practical D Rings, and mounting holes for LED lights (lights not
    included)

INCLUDES:
RTR SCX10 Deadbolt, 2-ch 2.4GHz radio, ESC, 27T Motor,
    User's manual

NEEDS:
Transmitter Batteries: Four AA size
Battery: 7.2V NiMH 6-cell stick pack or 2-3S LiPo pack
Battery Charger: Suitable with chosen battery
Track devices

SPECIFICATIONS:
Car-
Length: 18.1" (460mm)
Width: 8.8" (225mm)
Height: 9" (229mm)
Wheelbase: 12" (305mm)
Ground Clearance: 2.7" (68mm)
Weight: 4.65lb (2.1kg)
    Body-
Length:
Width:
Height:

REMARKS:
For Replacement Ball Bearings use:
    Qty. Size Area Qty. Bearing Set
2 5x11mm Fr Dogbones 1 DTXC1547
2 10x15mm Fr Dogbones 1 DTXC1595
2 5x11mm Front Axle 1 DTXC1547
2 5x11mm Fr Centers 1 DTXC1547
2 10x15mm Fr Hubs 1 DTXC1595
2 5x11mm Rear Dogbones 1 DTXC1547
2 10x15mm Rear Dogbones 1 DTXC1595
2 5x11mm Rear Axle 1 DTXC1547
4 5x10mm Transmission 1 DTXC1535
2 8x16mm Transmission 1 DTXC1585