Axial Hex Socket Tapping Button Head 2.6x12mm (10)

This is a bundle of 2.6x12mm Hex Socket Button Head Screws from Axial.

FEATURES:
For usage in the Axial SCX10 Jeep® Wrangler
Steel building and construction, black in color

CONSISTS OF:
Ten 2.6x12mm Hex Socket Button Head Screws

NEEDS:
1.5mm hex wrench, HPIR1491

SPECIFICATIONS:
Length: 12mm
Size: 2.6mm

This thing is frequently gotten with the above stated thing.

Hex Tap Button Head M3x10mm Black (10)

These are the Axial M3x10mm Hex Socket Tapping Button Head Screws.

FEATURES:
Black metal building and construction

CONSISTS OF:
Ten M3 x 10mm screws

NEEDS:
Setup on vehicle

COMMENTS:
Can be utilized wherever this size screw is required

This thing praises the above discussed thing.



This is a Basic LED Controller with LED Lights from Axial.

FEATURES:
Covered controller
Red and white LED lights
Universal port for receiver
Suitable with other Axial LED colored light hairs AXIC4252
AXIC4253 AXIC4254 AXIC4255 AXIC4256 AXIC2458
Works with Axial Light Pail Set AXIC4257
Alternate Axial NVS System AXIC4251

CONSISTS OF:
Control system
4 white LED lights
2 red LED lights

NEEDS:
Setup
Aluminum Tape

You will love this item if you have the item above pointed out.



This is the 2NR Micro Plug from WS Deans.
It is a non-polarized plug with gold-plated pins.

FEATURES:
Plastic port body, Red in color
Non-polarized
Gold-plated pins

CONSISTS OF:
One male-male port (pins on both sides)
One male-female port (pins on one side)
2 pieces of little Red heat-shrinkable tubing
2 pieces of little Black heat-shrinkable tubing

NEEDS:
Solder, soldering iron (HCAR0775) or soldering gun

SPECIFICATIONS:
General length connected: .940" (24mm)
Length of plastic body, connected: .574" (14.6mm)
Pin length, six locations: .181" (4.6mm)
Width in between pins: .058" (1.4mm)

COMMENTS:
The port is NOT compatible with little White
    Futaba transmitter battery adapters.

Get this thing to enhance the one you read around.



These are the 2.6x6mm Hex Socket Tapping Button Head Screws utilized on the
Axial Wraith Rock Racer.

FEATURES:
Steel building and construction, black in color

CONSISTS OF:
Ten 2.6x6mm Hex Socket Tapping Button Head Screws

NEEDS:
1.5mm hex wrench, GPMR8010

SPECIFICATIONS:
Length: 6mm
Size: 2.6mm

This thing praises the main item here.

Hex Socket Button Head M3x25mm Black (10)

    These are the M3x25mm Hex Socket Button Head Screws.

FEATURES:
Black metal building and construction

CONSISTS OF:
Ten M3 x 25mm screws

NEEDS:
Setup on vehicle

COMMENTS:
Can be utilized wherever this size screw is required

Often gotten with the thing that you are presently checking out.

12Mm Mini Hex Wheel Widener Set (+15Mm)

This is a bundle of RC4WD Mini 12mm Wheel Wideners.

FEATURES:
Widens each side of truck by 0.47" (12mm)
CNC machined aluminum building and construction
Stainless steel mini barrel nut
Suitable with any 12mm hex wheels such as those utilized on the
    Tamiya F-350, Tundra, Jeep, Axial AX10, Losi Crawler, RC4WD
    Timberwolf and Bully

CONSISTS OF:
Four RC4WD Mini 12mm Wheel Wideners
Four Barrel Nuts
8 Washers

SPECIFICATIONS:
Outer Size: 0.51" (13mm)
Width: 0.04" (1.1mm)
Internal size: 0.24" (6.2mm)