Axial Aluminum Servo Horn 25T

This is the Axial 25T Aluminum Servo Horn for Futaba, Axial and Savox Servos.

FEATURES:
Hard anodized aluminum construction
Compression install, two screws set up on either side of arm and
    tighten center hole around servo spline

CONSISTS OF:
Axial 25T Aluminum Servo Horn
2 2x8mm socket head screws

SPECIFICATIONS:
Length: 0.98" (25mm) from center of servo installing hole to end of arm
Hole Diameter: 3mm
Pitch:3x30

Lots of others have actually acquired this product along with the product that you are presently reading about.



The SW0231MG is a spending plan friendly water resistant digital servo with terrific torque for many applications. This brushed servo features a speed of .17 and 208.0 oz-in of torque 6.0V. It integrates leading edge innovation with extremely high 12-bit (4096) resolution and metal gears for your higher precision when evading puddles. This is a great upgrade if your aiming to drive your RC car in any condition...rain, sleet, or snow.

Features:

• Combines leading edge
  innovation with extremely high 12 bit (4096) resolution and metal gears.
• Waterproof.
• Brushed motor
• Exceptionally strong metal gears guarantee long-life and durability.
• Our servos are totally green ? from materials to production, these servos are ecologically friendly.
• Ideal for RC vehicles, trucks, buggies, and boats.

Dimensions(mm): 41.8x20.2x42.9
Weight(g): 66
Speed(@6.0V sec/60): .17
Torque(@6.0V oz-in): 208.0
Equipment: Metal
Bearing: 2BB
Case: Plastic
25 Tooth Spline
IP Rating: 67
Frequency: 200-250hz
Pulse Width Frequency: 1520

Right here is a terrific product that several others have actually bought at the exact same time.



Racers Edge 25C 5000 mAh 2S1P LI-Poly Battery hardwired with Deans Ultra Plug. Racers Edge battery is lighter than traditional Ni-Cd or Ni-Mh batteries while offering improved performance and run times. It uses the same balancing connection as Align or Electrifly chargers. Be sure to use a voltage cut off if your speed control does not come equipped with one. ONLY USE A BATTERY CHARGER SPECIFICALLY FOR Li-Poly cells!!!

The below product likewise sets truly well with the product being discussed.

Steering Upgrade Kit

This is the Steering Upgrade Set by Axial
for use on Axial AX10 and SCX10.

FEATURES:
Replaces the stock plastic guiding links
This package will increase guiding strength and precision

CONSISTS OF:
Plastic linkage set
2 aluminum linkage rods
Installing hardware
In-depth instructions

REQUIRES:
Installation on model

This product compliments the main item below.



This is a low-resistance, compact-size 2-Pin Ultra Plug Adapter from Deans.
This design removes the possiblility of reverse polarity connections.
Provides a secure connection for battery and motor connections on R/C vehicles.

INCLUDES:
One 2-Pin Male Ultra Plug WSDM1302
One 2-Pin Female Ultra Plug WSDM1303

REQUIRES:
Soldering adapters onto wires

You will enjoy this product if you have the product just above stated.

Rock Crawler Brushed Motor 35T HD

This is the Tekin T35 HD 35 Turn Rock Spider Brushed Motor.

FEATURES:
High-strength upgraded ferrite magnets
Legal for rock crawling competitors
Entirely rebuildable
Double precision ball bearings
120 day restricted guarantee

CONSISTS OF:
Tekin T35 HD 35 Turn Rock Spider Brushed Motor

REQUIRES:
ESC such as the Tekin FXR Brushed ESC, TEKM1091
Motor leads
Pinion equipment depending upon car

SPECIFICATIONS:
Input Voltage: THREE LiPo or 10-cell NiMH battery
Dimensions: 2.07 x 1.42" (52.7 x 36mm)
Shaft Diameter: 0.125" (3.2mm)
Bearing Size: 3/8 x 1/8"
Motor Weight: 5.98oz (169g)