Axial SCX24 Deadbolt 1/24th Scale Elec 4WD - RTR, Green

Key Functions:
• Consists of radio system, ESC and transmitter batteries
• Consists of motor and on-board LiPo battery
• Reasonable narrow-stance rock crawler body in olive green or red
• Molded roll cage with sensible light bar
• Reasonable chauffeur figure and many other scale information
• Formally certified KMC XD229 Machete Crawl wheels
• Formally certified Nitto Path Grappler M/T tires (S30 compound, big block tread)
• Full-time 4WD
• Splined and sleeved front and rear drive shafts allow for maximum suspension travel while keeping the power to the wheels
• Steel front and rear axles, front stub axles and dogbones provide strength and sturdiness
• Rugged steel C-channel frame rails with bracing keep whatever rigid and lined up
• Front and rear axles consist of a two-piece, molded plastic solid axle style
• 3-Link front and 4-link rear suspension supply ideal handling
• Coil-over shocks with simulated tank and resilient plastic suspension links deliver proven Axial crawling performance
• Front and rear differentials each home a worm equipment setup to power the axles and develop higher ground clearance. Worm equipment drive likewise supplies a low equipment ratio to minimize torque twist
• Two LEDs in the front bumper for night driving
The SCX24™ Deadbolt™ 4WD is the first Axial® off-roader in 1/24 scale. At less than 8” long, it’s the perfect rig to take along on your hiking, camping, and other outside and indoor adventures — offering factory-assembled ease, scale looks, and positive handling on any trail.

Even new modelers driving the SCX24 chassis will be well-equipped to deal with difficult climbs up and rough trails. Like the larger SCX10™ chassis, this smaller version uses lots of steel parts — from the C-channel frame rails to the front and rear axles and dogbones. Even over off-road, mountainous, rocky and desert terrain, it has the strength to keep pushing onward and upward.

For the most reputable handling, the SCX24 chassis features a three-link front and four-link rear suspension. The mix of coil-over shocks and resilient plastic suspension links provides Axial-worthy crawling performance even at this small scale. The worm equipment drive setup permits a high ground clearance plus a low equipment ratio that minimizes torque twist.

Powered by an included 180-size motor and LiPo battery, the SCX24 Deadbolt shows off skills and charisma on the trails. Check out that Deadbolt body — with its narrow position, bulging hood, sensible chauffeur figure, and molded roll cage with sensible light bar. The realism continues right down to the ground, where you’ll find certified KMC XD229 Machete Crawl wheels covered in Nitto Path Grappler tires.

Adding even more to its novice appeal, the SCX24 Deadbolt comes 100% total and all set to run. Whatever required for action is in package: assembled and ended up lorry; Axial 2-channel 2.4GHz radio system with servo and ESC/receiver system; Dynamite® 88T brushed electric motor and 350mAh 2S 7.4V LiPo battery; USB LiPo charger; and even 4 AA cells for the transmitter!

What's in package?
(1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck
    (1) Axial AE-6 ESC/receiver combo (set up)
    (1) Dynamite® 88T brushed electric motor (set up)
    (1) Axial AS-1 steering servo (set up)
(1) Axial® AX-4 2.4GHz 2-channel radio
(4) AA transmitter batteries
(1) 350mAh 2S 7.4V LiPo battery
(1) USB LiPo charger
(1) Item Manual




STEEL C-CHANNEL CHASSIS FRAME RAILS
Just like the 1/10th scale SCX10™ platform, the SCX24™ chassis features rugged and strong steel c-channel frame rails with bracing to keep whatever intact and lined up.
 

DYNAMITE® 88T BRUSHED MOTOR
The Dynamite 88T brushed electric motor supplies the right amount of torque to assist rise steep climbs up. It's mated to a steel motor install to keep flex to a minimum, which helps secure the equipments.
 


WORM GEARS
The front and rear differentials each home a worm screw and worm equipment setup to get the power to the axles and develop higher ground clearance.
 

DURABLE STEEL AXLES
Steel front and rear axles, front stub axles along with steel dogbones provide strength and sturdiness to keep things running throughout difficult climbs up and rough trails.
 


SPLINED DRIVE SHAFTS
The front and rear drive shafts are splined and sleeved to allow for maximum suspension travel while keeping the power to the wheels.
 

COILOVER SHOCK ABSORBERS
Even at this small scale, the mix of coilover shocks with simulated reservoirs and resilient plastic suspension links provides the crawling performance you have actually understood and expect from Axial.
 


FRONT AND REAR SOLID AXLES
The front and rear axles consist of a 2 piece, molded plastic solid axle style. For ideal handling, the SCX24™ suspension features a three-link front and four-link rear setup.
 


LED LIGHTS INCLUDED
Two brilliant LED lights are consisted of and are mounted in the front bumper. An additional LED light port on the ESC permits you to add optional LED lights.
 

4-LINK REAR SUSPENSION
The suspension geometry makes use of a 4-Link style for the rear which is optimized to minimize axle steer and torque twist. We have actually likewise consisted of additional suspension links for changing your wheelbase length.
 


KMC XD229 MACHETE CRAWL WHEELS & NITTO TRAIL GRAPPLER M/T TIRES
Formally certified KMC XD Machete wheels are famous in the off-road world. They are molded in black and feature stunning scale information, regardless of the small scale.
The officially certified Nitto Path Grappler M/T Tires provide a fantastic blend of off-road performance while still retaining excellent composure for on-road use.
 

HINGED BODY SYSTEM
The hinged body system provides easy access to on-board parts. You can quickly reach the battery and chassis by removing simply two body clips and swinging the body up.
 


FULL BALL BEARINGS
Even if the SCX24™ is smaller in size doesn't imply the features need to do the same. No bushings discovered here, instead the drivetrain is easily spinning on sealed cartridge bearings throughout the entire lorry.
 

AXIAL AS-1 SERVO
Installed simply above the front axle is the Axial AS-1 servo, with a servo saver that enables steering accuracy, while likewise supplying defense for the servo equipments in case of a bind or effect.
 

Specifications

Type: Crawler
Scale: 1/24
Length: 7.8" (199.5mm)
Width: 3.9" (99.5mm)
Height: 4.73" (120.2mm)
Ground Clearance: 1.06" (27mm)
Wheelbase: 5.25" (133.5mm)
Weight: 0.5lb (0.22kg)
Chassis: Stamped steel rails
Suspension: Strong axle, front and rear
Drivetrain: 4WD
Tire Type: Nitto Path Grappler M/T, big block tread
Speed Control: AE-6 ESC receiver/combo
Radio: AX-4 2.4GHz 2-channel
Servos: AS-1 steering servo
Batteries: 7.4V 350mAh 30C LiPo (consisted of)
Charger: USB LiPo charger (consisted of)
Gear Pitch: 32-Pitch
Wheel Size: 0.48" (12.4mm) width, 1.0" (26mm) size
Kit/RTR: RTR
Shock Type: Plastic body coil-over .9 - 1.3" (24 - 33.4mm)
Body: Painted and cut Axial Deadbolt
Ball Bearings: Full body
Is Assembly Required: No