Axial SCX24 Deadbolt 1/24th Scale Elec 4WD - RTR, Green

Key Features:
• Includes radio system, ESC and transmitter batteries
• Includes motor and on-board LiPo battery
• Reasonable narrow-stance rock spider body in olive green or red
• Molded roll cage with reasonable light bar
• Reasonable motorist figure and lots of other scale information
• Formally licensed KMC XD229 Machete Crawl wheels
• Formally licensed Nitto Path Grappler M/T tires (S30 compound, large block tread)
• Full-time 4WD
• Splined and sleeved front and rear drive shafts enable maximum suspension travel while keeping the power to the wheels
• Steel front and rear axles, front stub axles and dogbones provide strength and resilience
• Rugged steel C-channel frame rails with bracing keep everything rigid and aligned
• Front and rear axles consist of a two-piece, molded plastic strong axle design
• 3-Link front and 4-link rear suspension supply ideal handling
• Coil-over shocks with simulated tank and durable plastic suspension links deliver tested Axial crawling performance
• Front and rear differentials each home a worm gear setup to power the axles and create greater ground clearance. Worm gear drive likewise supplies a low gear ratio to decrease torque twist
• Two LEDs in the front bumper for night driving
The SCX24™ Deadbolt™ 4WD is the first Axial® off-roader in 1/24 scale. At less than 8” long, it’s the ideal rig to take along on your hiking, outdoor camping, and other outside and indoor adventures — offering factory-assembled ease, scale looks, and confident handling on any trail.

Even new modelers driving the SCX24 chassis will be fully equipped to tackle difficult climbs and rough trails. Like the bigger SCX10™ chassis, this smaller sized variation uses a lot of steel elements — from the C-channel frame rails to the front and rear axles and dogbones. Even over off-road, mountainous, rocky and desert surface, it has the strength to keep pressing onward and upward.

For the most trustworthy handling, the SCX24 chassis includes a three-link front and four-link rear suspension. The combination of coil-over shocks and durable plastic suspension links provides Axial-worthy crawling performance even at this little scale. The worm gear drive setup allows a high ground clearance plus a low gear ratio that decreases torque twist.

Powered by an included 180-size motor and LiPo battery, the SCX24 Deadbolt displays competence and charisma on the trails. Check out that Deadbolt body — with its narrow position, bulging hood, reasonable motorist figure, and molded roll cage with reasonable light bar. The realism continues right down to the ground, where you’ll discover licensed KMC XD229 Machete Crawl wheels covered in Nitto Path Grappler tires.

Adding even more to its beginner appeal, the SCX24 Deadbolt comes 100% total and prepared to run. Everything needed for action remains in the box: put together and completed automobile; Axial 2-channel 2.4GHz radio system with servo and ESC/receiver unit; Dynamite® 88T brushed electric motor and 350mAh 2S 7.4V LiPo battery; USB LiPo charger; and even 4 AA cells for the transmitter!

What's in package?
(1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck
    (1) Axial AE-6 ESC/receiver combo (installed)
    (1) Dynamite® 88T brushed electric motor (installed)
    (1) Axial AS-1 guiding servo (installed)
(1) Axial® AX-4 2.4GHz 2-channel radio
(4) AA transmitter batteries
(1) 350mAh 2S 7.4V LiPo battery
(1) USB LiPo charger
(1) Product Handbook




STEEL C-CHANNEL CHASSIS FRAME RAILS
Similar to the 1/10th scale SCX10™ platform, the SCX24™ chassis functions rugged and sturdy steel c-channel frame rails with bracing to keep everything undamaged and aligned.
 

DYNAMITE® 88T BRUSHED MOTOR
The Dynamite 88T brushed electric motor supplies the right amount of torque to help rise high climbs. It's mated to a steel motor mount to keep flex to a minimum, which helps safeguard the gears.
 


WORM GEARS
The front and rear differentials each home a worm screw and worm gear setup to get the power to the axles and create greater ground clearance.
 

DURABLE STEEL AXLES
Steel front and rear axles, front stub axles along with steel dogbones provide strength and resilience to keep things running during difficult climbs and rough trails.
 


SPLINED DRIVE SHAFTS
The front and rear drive shafts are splined and sleeved to enable maximum suspension travel while keeping the power to the wheels.
 

COILOVER SHOCK ABSORBERS
Even at this little scale, the combination of coilover shocks with simulated reservoirs and durable plastic suspension links provides the crawling performance you've known and expect from Axial.
 


FRONT AND REAR SOLID AXLES
The front and rear axles consist of a 2 piece, formed plastic strong axle design. For ideal handling, the SCX24™ suspension includes a three-link front and four-link rear setup.
 


LED LIGHTS INCLUDED
Two bright LED lights are consisted of and are installed in the front bumper. An extra LED light port on the ESC permits you to add optional LED lights.
 

4-LINK REAR SUSPENSION
The suspension geometry utilizes a 4-Link design for the back which is enhanced to decrease axle guide and torque twist. We've likewise consisted of additional suspension links for changing your wheelbase length.
 


KMC XD229 MACHETE CRAWL WHEELS & NITTO TRAIL GRAPPLER M/T TIRES
Formally licensed KMC XD Machete wheels are famous in the off-road world. They are formed in black and feature stunning scale information, regardless of the little scale.
The formally certified Nitto Path Grappler M/T Tires provide a great mix of off-road performance while still maintaining excellent composure for on-road usage.
 

HINGED BODY SYSTEM
The hinged body system offers simple access to on-board elements. You can rapidly reach the battery and chassis by removing just two body clips and swinging the body up.
 


FULL BALL BEARINGS
Even if the SCX24™ is smaller sized in size doesn't imply the functions need to do the same. No bushings found here, rather the drivetrain is freely spinning on sealed cartridge bearings throughout the entire automobile.
 

AXIAL AS-1 SERVO
Mounted just above the front axle is the Axial AS-1 servo, with a servo saver that enables guiding precision, while likewise offering protection for the servo gears in case of a bind or impact.
 

Specs

Type: Crawler
Scale: 1/24
Length: 7.8" (199.5mm)
Width: 3.9" (99.5mm)
Height: 4.73" (120.2mm)
Ground Clearance: 1.06" (27mm)
Wheelbase: 5.25" (133.5mm)
Weight: 0.5lb (0.22kg)
Chassis: Stamped steel rails
Suspension: Solid axle, front and rear
Drivetrain: 4WD
Tire Type: Nitto Path Grappler M/T, large block tread
Speed Control: AE-6 ESC receiver/combo
Radio: AX-4 2.4GHz 2-channel
Servos: AS-1 steering servo
Batteries: 7.4V 350mAh 30C LiPo (consisted of)
Battery charger: USB LiPo charger (consisted of)
Equipment Pitch: 32-Pitch
Wheel Size: 0.48" (12.4mm) width, 1.0" (26mm) diameter
Kit/RTR: RTR
Shock Type: Plastic body coil-over .9 - 1.3" (24 - 33.4mm)
Body: Painted and trimmed Axial Deadbolt
Ball Bearings: Full body
Is Assembly Required: No