Associated Hood Pins Large (6)

These are ASSOCIATED big standard type body pins utilized to hold body to mount.

INCLUDES:
Six pins.

SPECS:
length 1-3/8"
wire size 1/16"

Lots of others have acquired this item along with the item that you are currently checking out.



This is the replacement Front or Back Transmission Case (transmission)
for the Associated Beast GT RTR
This part mounts on the front or rear of the chassis and houses the
differential gear and differential pinion.

FEATURES:
Two piece, black plastic building

CONSISTS OF:
Two transmission halves
One plastic transmission collar
One 3x18mm phillips head screw
One 3x34mm phillips head screw
Three 3x25mm phillips head screw
Four 3mm nylon insert lock nuts

NEEDS:
Assembly following the guidelines that included the model

REMARKS:
This package includes parts for one transmission case. If both the
    front and rear case is required, order two of this number.

Here is a fantastic item that lots of others have bought at the exact same time.



This is a set of Bellcrank Hardware for the Team Associated
Beast GT RTR

FEATURES:
Metal building

CONSISTS OF:
Four metal ball eyelets
Four 3x16mm phillips head screws
Two 3mm hex head shoulder screws
Four 3mm metal lock nuts with nylon inserts

NEEDS:
Assembly onto the model following the manual that included the package

REMARKS:
To obtain the rest of the parts required for a total bellcrank, order
ASCC8625 for the plastic parts and ASCC8626 for the metal posts.

You will love this item if you have the item just above discussed.



This is the Rear Shock Rod End for the Team Associated GT vehicles.

FEATURES:
Black nylon building ball ends
Steel swivel balls

CONSISTS OF:
Two ball ends
Two steel swivel balls

NEEDS:
Setup

This item praises the above talked about item.



This is the Replacement Shock Rebuild Kit w/ Shock Shafts
for the Team Associated Beast GT. This Rebuilds Two Shocks.

FEATURES:
Shock Shafts-
    Steel Building and construction
    Polished Silver in Color
    Standard Threading on Bottom
    Dual E-Clip Cut-Outs on Top
Diaphragms-
    Rubber Building and construction
    Black in Color
O-Rings-
    Silicone Building and construction
    Blue in Color
Shock Body Bushing-
    Nylon Building and construction
    White in Color
E-Clips-
    Black in Color

CONSISTS OF:
Two Steel Silver Shock Shafts
Two Black Rubber Shock Diaphragms
Four Blue Silicone O-Rings
Two White Nylon Shock Base Bushings
Two 3/32" Black Metal E-Clips

NEEDS:
Assembly onto Vehicle.

SPECS:
SHOCK SHAFT-
Length: 2.19" (55.62mm)
Size: 0.11" (02.79mm)
Thread Length: 0.27" (06.85mm)

SHOCK DIAPHRAGMS-
Size: 0.56" (14.22mm)
Density: 0.03" (00.76mm)

RUBBER O-RINGS-
Inner Size: 0.14" (03.55mm)
Outer Size: 0.26" (06.60mm)
Density: 0.05" (01.27mm)

E-CLIPS-
Outer Size: 0.23" (05.84mm)
Inner Size: 0.09" (02.28mm)
Density: 0.01" (00.25mm)

This item praises the above talked about item.

Flat Head Hex Screw M3x8mm (10)

This is a package of 3x8mm Associated Flat Head Hex Machine Screws.
    These screws can be utilized anywhere this size is needed.

FEATURES:
Black steel building
Hexagon socket drive insert

CONSISTS OF:
Twenty 3x8mm flat head device screws

NEEDS:
2.5mm allen secret, GPMR8012