Associated Button Head Hex Screw M3x20mm (20)

This is a plan of 3x20mm Hex Head Machine Screws.
    These screws can be used anywhere this size is needed.

FEATURES:
Black steel construction
Hexagon socket drive insert

CONSISTS OF:
Twenty 3x20mm hex head maker screws

REQUIRES:
2mm hex wrench, GPMR8011

SPECS:
Length: 20mm
Diameter: 3mm

Get this product to boost the one you are reading around.



This is the replacement Front or Back Transmission Case (transmission)
for the Associated Beast GT RTR
This part mounts on the front or back of the chassis and houses the
differential equipment and differential pinion.

FEATURES:
2 piece, black plastic construction

CONSISTS OF:
2 transmission halves
One plastic transmission collar
One 3x18mm phillips head screw
One 3x34mm phillips head screw
3 3x25mm phillips head screw
4 3mm nylon insert lock nuts

REQUIRES:
Assembly following the directions that came with the model

REMARKS:
This plan consists of parts for one transmission case. If both the
    front and rear case is needed, order two of this number.

This product is frequently bought with the above stated product.



This is a set of Bellcrank Hardware for the Team Associated
Beast GT RTR

FEATURES:
Metal construction

CONSISTS OF:
4 metal ball eyelets
4 3x16mm phillips head screws
2 3mm hex head shoulder screws
4 3mm metal lock nuts with nylon inserts

REQUIRES:
Assembly onto the model following the manual that came with the package

REMARKS:
To obtain the rest of the parts needed for a total bellcrank, order
ASCC8625 for the plastic parts and ASCC8626 for the metal posts.

Lots of others have actually bought this product along with the product that you are currently reading about.



This is the Rear Shock Rod End for the Team Associated GT vehicles.

FEATURES:
Black nylon construction ball ends
Steel swivel balls

CONSISTS OF:
2 ball ends
2 steel swivel balls

REQUIRES:
Setup

You will certainly enjoy this product if you have the product above stated.



This is the Replacement Shock Rebuild Package w/ Shock Shafts
for the Team Associated Beast GT. This Reconstructs 2 Shocks.

FEATURES:
Shock Shafts-
    Steel Construction
    Refined Silver in Color
    Requirement Threading on Bottom
    Dual E-Clip Cut-Outs on Leading
Diaphragms-
    Rubber Construction
    Black in Color
O-Rings-
    Silicone Construction
    Blue in Color
Shock Body Bushing-
    Nylon Construction
    White in Color
E-Clips-
    Black in Color

CONSISTS OF:
2 Steel Silver Shock Shafts
2 Black Rubber Shock Diaphragms
4 Blue Silicone O-Rings
2 White Nylon Shock Base Bushings
2 3/32" Black Metal E-Clips

REQUIRES:
Assembly onto Vehicle.

SPECS:
SHOCK SHAFT-
Length: 2.19" (55.62mm)
Diameter: 0.11" (02.79mm)
Thread Length: 0.27" (06.85mm)

SHOCK DIAPHRAGMS-
Diameter: 0.56" (14.22mm)
Thickness: 0.03" (00.76mm)

RUBBER O-RINGS-
Inner Diameter: 0.14" (03.55mm)
Outer Diameter: 0.26" (06.60mm)
Thickness: 0.05" (01.27mm)

E-CLIPS-
Outer Diameter: 0.23" (05.84mm)
Inner Diameter: 0.09" (02.28mm)
Thickness: 0.01" (00.25mm)