Associated Flat Head Hex Screw M3x8mm (10)

This is a plan of 3x8mm Associated Flat Head Hex Device Screws.
    These screws can be utilized anywhere this size is needed.

FEATURES:
Black steel building and construction
Hexagon socket drive insert

CONSISTS OF:
Twenty 3x8mm flat head maker screws

NEEDS:
2.5mm allen secret, GPMR8012

This product compliments the above reviewed product.



This is the replacement Front or Back Transmission Case (gearbox)
for the Associated Beast GT RTR
This part installs on the front or back of the chassis and houses the
differential gear and differential pinion.

FEATURES:
2 piece, black plastic building and construction

CONSISTS OF:
2 gearbox halves
One plastic gearbox collar
One 3x18mm phillips head screw
One 3x34mm phillips head screw
Three 3x25mm phillips head screw
Four 3mm nylon insert lock nuts

NEEDS:
Assembly following the directions that came with the model

REMARKS:
This bundle consists of parts for one transmission case. If both the
    front and rear case is required, order two of this number.

The listed below product also sets really well with the product being reviewed.



This is a set of Bellcrank Hardware for the Group Associated
Beast GT RTR

FEATURES:
Metal building and construction

CONSISTS OF:
Four metal ball eyelets
Four 3x16mm phillips head screws
2 3mm hex head shoulder screws
Four 3mm metal lock nuts with nylon inserts

NEEDS:
Assembly onto the model following the manual that came with the kit

REMARKS:
To obtain the rest of the parts required for a complete bellcrank, order
ASCC8625 for the plastic parts and ASCC8626 for the metal posts.

This is a fantastic enhancement to the product presently being reviewed.



This is the Rear Shock Rod End for the Group Associated GT vehicles.

FEATURES:
Black nylon building and construction ball ends
Steel swivel balls

CONSISTS OF:
2 ball ends
2 steel swivel balls

NEEDS:
Installation

Get this product to boost the one you are reading around.



This is the Replacement Shock Rebuild Package w/ Shock Shafts
for the Group Associated Beast GT. This Rebuilds 2 Shocks.

FEATURES:
Shock Shafts-
    Steel Building
    Refined Silver in Color
    Standard Threading on Bottom
    Dual E-Clip Cut-Outs on Top
Diaphragms-
    Rubber Building
    Black in Color
O-Rings-
    Silicone Building
    Blue in Color
Shock Body Bushing-
    Nylon Building
    White in Color
E-Clips-
    Black in Color

CONSISTS OF:
2 Steel Silver Shock Shafts
2 Black Rubber Shock Diaphragms
Four Blue Silicone O-Rings
2 White Nylon Shock Base Bushings
2 3/32" Black Metal E-Clips

NEEDS:
Assembly onto Vehicle.

SPECS:
SHOCK SHAFT-
Length: 2.19" (55.62mm)
Diameter: 0.11" (02.79mm)
Thread Length: 0.27" (06.85mm)

SHOCK DIAPHRAGMS-
Diameter: 0.56" (14.22mm)
Thickness: 0.03" (00.76mm)

RUBBER O-RINGS-
Inner Diameter: 0.14" (03.55mm)
Outer Diameter: 0.26" (06.60mm)
Thickness: 0.05" (01.27mm)

E-CLIPS-
Outer Diameter: 0.23" (05.84mm)
Inner Diameter: 0.09" (02.28mm)
Thickness: 0.01" (00.25mm)