APC 6x4 Speed 400 Electric Pusher Prop

This is a 6x4 Speed 400 Electric Pusher Propeller
from Advanced Accuracy Composites.
For utilize on Electric powered airplane just, not for glow powered engines.

FEATURES:
Constructed of Gray composite material
For Speed 400 motor applications
2 adjuster rings that adapt to various motor shafts

INCLUDES:
6x4 Speed 400 Electric Pusher Propeller, 2 adapter rings and
    direction sheet

REQUIRES:
Assembly onto motor shaft or gear drive device in Electric plane

SPECIFICATIONS:
Diameter: 6"
Pitch: 4
Hub inner size: 0.24" (6mm) where rings are installed
Inner Diameter of Rings: 0.188" (4.8mm) and 0.236" (6mm)

Several others have actually purchased this product together with the product that you are presently checking out.

6x4 Thin Electric Prop

This is a 6x4E Thin Composite propeller from Advanced Accuracy Composites.
For utilize on Electric powered airplane just (not for glow engines).

FEATURES:
Gray composite propeller blades that put together onto a propeller hub.
Comes with 2 adjuster rings that adapt to various motor shafts.
Comes in a bag connected to a header card.

INCLUDES:
One composite propeller
2 composite adapter rings
One direction sheet

REQUIRES:
Assembly onto motor or gear drive device in your Electric plane.
Balancing

SPECIFICATIONS:
Diameter: 6"
Pitch: 4
Hub inner size: 0.25"

REMARKS:
Use Speed 400 Electric motors.

Several others have actually purchased this product together with the product that you are presently checking out.

Tower Pro SG90 Servo

Functions:
Micro Servo Titan 9g servo
Equipment Type : All Nylon Equipment
Dead Band Width : 2 usec
Stall Torque : 1.5kg/cm at 4.8V
Operation Voltage : 3.0 - 7.2Volts

Specifications:
Dimension : 23mm x 12mm x 29mm
Connector Wire Length : About 248mm
Running Speed : 0.12sec / 60 degrees (4.8V no load)
Temperature Variety : -30 to +60 Degree C
Net weight : about 11g
Color : black

Packing material:
1 x 9g TITAN Servo Sets (with accessories)

Frequently purchased with the product that you are presently checking out.

A2212-6 2200Kv Brushless Outrunner Motor, 3.17 mm Shaft, 3.5mm B

Specifications

Cells: 5-7 Nimh 2-3 Lipo
RPM/V: 2200Kv
Max Performance: 14-22 A
No Load Current: 1.4 A
Current Capability: 28A/60s
Shaft Diameter: 3mm
Weight: 47 g
Measurements: 27.5mm x 30 mm

Recomended Model Weight: 300-1000g
Recomended Prop; 2s Lipo 7 x 5 - 3s Lipo 5 x 5

Here is a terrific product that several others have actually purchased the exact same time.

Rimfire Prop Saver 28mm Motors

This is the ElectriFly Rimfire Prop Saver for usage on 28mm Motors.

FEATURES:
Aluminum building and construction

INCLUDES:
One Prop Saver
2 Rubber O-Rings
2 Bushings

REQUIRES:
Setup on Rimfire 28mm Motor

This product is regularly purchased with the above stated product.

Prop Saver Rubberbands/O-Rings (4)

These are the Prop Saver Rubber Bands for the Great Planes Yak 55 EP ARF

FEATURES:
Twists around the Prop to hold it on and protect it throughout crashes

INCLUDES:
(4) Rubber Bands

Here is another product that praises the product being discussed.

Mini E/Z Connector 2/Pkg

These are Mini E-Z Connectors for Park Flyers by Dubro.

FEATURES:
Aluminum Construction

INCLUDES:
2 Connectors
2 Screws
2 Washers

REQUIRES:
Nothing

SPECIFICATIONS:
Length: 4.8mm (3/16")
Diameter: 3.2mm (1/8")
Weight: 0.25g (0.0088oz)

REMARKS:
Optimum pushrod size is .047 - 3/64" (1.22mm)