Align DS150/155 Servo Gear Set

Usage for ALIGN DS150/155 Servo.

Specifications:
DS150/155 gear G1x1
DS150/155 gear G2x1
DS150/155 gear G3x1
DS150/155 gear G4x1
DS150/155 Servo rudder piece x 1
Socket button head self tapping scre x 1(T1.5x3mm)

Lots of others have actually purchased this item together with the item that you are currently reviewing.

150 Main Shaft

Usage for T-REX 150.

Specifications:
Main Shaft x 2(Φ1.6xΦ3x45.8mm)
Socket button head screw x 2(M2x4mm)

The below item likewise pairs really well with the item being discussed.

150 Feathering Shaft

Usage for T-REX 150.

Specifications:
150 Feathering shaft x 3(Φ2x16.5mm)
Socket Button Head Screw x 6(#0-80x3mm)
100 Spacer x 6(Φ1.6x3.2x0.2mm)

Often purchased with the item that you are currently reviewing.

DS150 Digital Servo

Appropriate for T-Rex 150

Directions:
4g digital micro servos are special design for T-REX 150 DFC, includes to increase micro helicopter control speed and precision, let the micro/indoor helicopter has same flight efficiency as large/outdoor helicopter.

Specifications:
Stall torque:0.8kg．cm(5V)
Motion speed:0.06 sec/60?(5V)
Rating voltage:DC 4.8-6V
Measurement:19.8x8.4x23.3mm
Weight:4.3g
1520μs basic band

Devices:
DS150/155 Servo rudder piece x 1
Socket button head self tapping scre x 1(T1.5x3mm)

Get this item to improve the one you read about.

150 Landing Skid

Usage for T-REX 150.

Specifications:
Landing Skid x 2
Landing Skid nut x 8(Φ1.5xΦ3x2mm)
Socket button head self tapping screw x 4(T1.5x3mm)

Below is a great item that several others have actually bought at the very same time.

78T Main Drive Gear

Usage for T-REX 100S/100X/150.

Specifications:
Main Drive Gear(78T) x 2

Often purchased with the item that you are currently reviewing.

2S1P 7.4V 250mAh/30C

Usage for T-REX 150.

Direction::
Max Continuous Discharge: 30C. Typical operating temperature is approx. 40-65?C(within 80% of ranked discharge). Max. temperature: 80?C.
Recommend to release the battery within 80% of ranked discharge, keep 95% capability when over 100 cycles, keep 90% capability when over 150 cycles.(The cycle life and performance will decrease due to high current, high temperature and over-discharge)

KEEP IN MIND::
When utilizing high energy Li-poly Battery, please do not over-discharge, over-charge batteries, or result over-high temperature. Discharging capability can't surpass 80% of limit capability after complete crediting guarantee an excellent cycle performance.Recommend to complete charge a brand name new battery before utilizing and only release the battery 50% for first 5 times making an excellent performance of the battery. Please make it a habit to constantly count time for flight, or please set a low voltage security on ESC (Cell voltage after stopping utilizing can not reduce than 3.4V). Do not use the battery at insufficient of voltage.

Do not expose batteries to sunlight or shop/ charge batteries at the temperature approximately 35℃ in a airtight automobile. The environment high temperature could trigger the damage or the threat of burst. If the battery becomes hot while high current discharging or flying, please do not charge the battery instantly. Wait to cool down(about 20 mins), then inspect to recharge. If versus follow the initial factory utilizing rules, potentially trigger the battery to pump up or any harmful mishap takes place.
Do not leave the charger is operating ignored as it may trigger a fire.

Specifications:
Output:7.4V250mAh (2S1P)
Measurement:47x21.5x12mm
Weight:15g