Traxxas Two-Piece Receiver And Battery Hold Downs

This is the Reciever & Battery Hold-Down Plate for the Traxxas Stampede.

FEATURES:
Plastic building, gray in color
Metal posts and body clips

CONSISTS OF:
One battery hold down
One receiver hold down
2 metal posts
2 body clips
Servo tape/adhesive foam pad

REQUIRES:
Installation on the Stampede

Here is one more product that compliments the product being talked about.

Maxx Series Body Clips 12Pc

These are the Body Clips for the Traxxas E-Maxx and T-Maxx Trucks.

FEATURES:
Steel building
Natural refined color

CONSISTS OF:
Twelve Body Clips

SPECIFICATIONS:
Length: 26mm

This is a wonderful enhancement to the product presently being talked about.

Main Chassis (S)

This is the replacement chassis for the Traxxas Stampede truck. It is made
of black, enhanced nylon and is a channel-style chassis.

PACKAGE
CONSISTS OF: One chassis

REMARKS:
The skid plates are not consisted of, utilize TRAC9023.

This product compliments the main item right here.

Camber Turnbuckle Set Blue Fits Rustler/Stampede

This is the optional Aluminum Turnbuckle set for the
Traxxas, Rustler and Stampede.

FEATURES:
Anodized aluminum building, blue in color
Black nylon ball ends

CONSISTS OF:
2 39mm front camber links
2 49mm back camber links
Links are put together with rod ends and hollow balls
One blue 5mm aluminum wrench

REQUIRES:
Installation onto automobile

You will certainly like this thing if you have the thing previously stated.

Antenna Tube W/ Cap, Black

This is a basic replacement Antenna Tube with Cap from Dubro
This item can be used anywhere an antenna tube is had to support
a receiver antenna wire.

FEATURES:
Black plastic building

CONSISTS OF:
One antenna tube
One antenna tube cap
One receiver antenna wire sleeve

REQUIRES:
Absolutely nothing. This is a direct fit part for any boat, car, etc. that uses
    a basic size antenna tube.

SPECS:
Length: 12 1/4" (311mm)
Size: 1/8" (3.2mm)

Here is one more product that compliments the product being talked about.

Battery Expansion Kit For Rustler/Stampede/Bandit

This is the Battery Growth Set
for the Traxxas Rustler, Outlaw and Stampede.

FEATURES:
Metal building
Permits installation of taller multi-cell battery loads

CONSISTS OF:
Foam, battery posts and screws

REQUIRES:
Installation on the automobile

SPECIFICATIONS:
Height: 1.41" (36mm)

REMARKS:
Battery & receiver hold down is needed for the Stampede

The below product likewise sets truly well with the product being talked about.

Body Mounts, Front & Rear/ Body Mount Posts, Front & Rear