Traxxas Tire & Wheel Assy, Glued (Sct

This is a pair of Traxxas SCT Split Spoke Front Wheels in Black
and Mud Surface T/A KM2 Tires for use on the Slash 4X4.

FEATURES:
Fits front of the 2 wheel drive 1/10 scale Traxxas Slash
Black colored double profile beadlock style wheel with chrome finish
    spokes
Off-road tread rubber tires with foam inserts

INCLUDES:
Two Mud Surface T/A KM2 Tires, Foam Inserts and SCT Split Spoke
    Front Wheels in Black

NEEDS:
Setting up on front centers

SPECS:
Outer Diameter: 4.3" (109mm)
Width: 1.7" (43mm)
Hex size: 0.47" (12mm)

Want an additional terrific product to compliment the above pointed out product?




Specifications


Type: NiMH
Capability: 220mAh
Voltage: 4.8V
Port Type: Losi Micro
Variety of Cells: 4-cell
Weight: 0.81 oz (22.9g)
Length: 1.96 in (49.8mm)
Width: 0.81 in (20.6mm)
Height: 0.41 in (10.5mm)









This product is often gotten with the above pointed out product.



This is the Tire Wheel Assembly SCT Front/Rear
from Traxxas.

FEATURES:
Installed BG Goodrich tires with foams on Split Spoke Satin chrome,
    black beadlock style wheels in plastic

INCLUDES:
Two installed BF Goodrich Mud Surface T/A KM2 tires with foams
Two Split Spoke Satin Chrome, Black Beadlock Design Wheels

NEEDS:
Installation

SPECS:
Width: 1.73" (44mm)
Diameter: 4.3" (110mm)
Hex Size: 14mm

Here is a terrific product that many others have purchased the very same time.

Hex Hubs & Axle Pins Slash

These are the replacement rear wheel adapters for the Hawk, Hawk 2, Bullet,
Sledgehammer, Eagle, and Blue Eagle LS. These are hex nuts that connect the
rear wheels to the axles.

INCLUDES:
2- plastic hex collars (wheel adapters)
4- stub axle pins

WAJ
1/16/93

The listed below product additionally pairs really well with the product being discussed.

Hex Wheel Hubs

This is the Set of Hex Wheel Centers for the Traxxas T-Maxx 4WD RTR Beast Truck.
These wheel centers fit on completion of the stub axles.

FEATURES:
Replaces missing out on or damaged hex wheel centers
Centers are made from molded black plastic
Axle pins are steel

INCLUDES:
Two Hex Wheel Centers
Two 2.5x12mm axle pins

NEEDS:
Inserting pins through stub axles (4953) and placing wheel centers in
    recessed location of axle providers (4932).

This product praises the above discussed product.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt guards

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)

Want an additional terrific product to compliment the above pointed out product?



5200mAh 50C for under $50!
This 2-cell 5200mAh 50C lipo is ideal for 1/10 scale automobiles, trucks, and buggies! Features a big capacity for prolonged run times and a massive C score so you'll have all the power you'll ever require. Consists of a Traxxas-type port on the discharge leads.
Features

High-end efficiency and dependability at an inexpensive price
Perfect for 1/10 scale automobiles, trucks, and buggies
Great option for the Traxxas Slash and Slash 4X4 designs, E-Maxx Brushless Edition, E-Revo Brushless Edition, and Spartan
Features a big capacity for prolonged run times and a massive C score so you'll have all the power you'll ever require
Consists of a Traxxas port on the discharge leads

Suitable With:

Traxxas Slash and Slash 4X4 designs
Traxxas E-Maxx Brushless Edition
Traxxas E-Revo Brushless Edition
Traxxas SpartanTraxxas E-Maxx 1/10 scale 4WD Electric Beast Truck (#3903)
Traxxas E-Revo 1/10 scale 4WD Beast Truck (#5603)
Traxxas 1/10 Brushless Rally Racer (#7407)
Traxxas 1/10 scale brushless pro 4WD short course race trucks including: Slash 4x4 (#6068L), Platinum(# 6804R), and Ultimate (#6807)
Traxxas 1/10 scale brushless pro 2WD short course race trucks including: Slash (#5805) & (#5803), Slash VXL (#5807L)
Traxxas 1/10 scale 4WD Severe terrain monster truck Top (#5607L)

Specifications

Length: 138 mm
Width: 47 mm
Height: 25 mm
Weight: 266 g