Traxxas Tire & Wheel Assy, Glued (Sct

This is a pair of Traxxas SCT Split Spoke Front Wheels in Black
and Mud Surface T/A KM2 Tires for use on the Slash 4X4.

FEATURES:
Fits front of the 2 wheel drive 1/10 scale Traxxas Slash
Black colored dual profile beadlock design wheel with chrome finish
    spokes
Off-road tread rubber tires with foam inserts

SUCHES AS:
2 Mud Surface T/A KM2 Tires, Foam Inserts and SCT Split Spoke
    Front Wheels in Black

REQUIRES:
Setting up on front centers

SPECS:
Outer Diameter: 4.3" (109mm)
Width: 1.7" (43mm)
Hex size: 0.47" (12mm)

Want one more excellent item to compliment the above pointed out item?




Specs


Type: NiMH
Capability: 220mAh
Voltage: 4.8V
Port Type: Losi Micro
Number of Cells: 4-cell
Weight: 0.81 oz (22.9g)
Length: 1.96 in (49.8mm)
Width: 0.81 in (20.6mm)
Height: 0.41 in (10.5mm)









This item is regularly gotten with the above pointed out item.



This is the Tire Wheel Assembly SCT Front/Rear
from Traxxas.

FEATURES:
Mounted BG Goodrich tires with foams on Split Spoke Satin chrome,
    black beadlock design wheels in plastic

SUCHES AS:
2 mounted BF Goodrich Mud Surface T/A KM2 tires with foams
2 Split Spoke Satin Chrome, Black Beadlock Design Wheels

REQUIRES:
Setup

SPECS:
Width: 1.73" (44mm)
Diameter: 4.3" (110mm)
Hex Size: 14mm

Here is a excellent item that numerous others have actually purchased the same time.

Hex Hubs & Axle Pins Slash

These are the replacement rear wheel adapters for the Hawk, Hawk 2, Bullet,
Sledgehammer, Eagle, and Blue Eagle LS. These are hex nuts that connect the
rear wheels to the axles.

INCLUDES:
2- plastic hex collars (wheel adapters)
4- stub axle pins

WAJ
1/16/93

The listed below item likewise sets truly well with the item being gone over.

Hex Wheel Hubs

This is the Set of Hex Wheel Hubs for the Traxxas T-Maxx 4WD RTR Beast Truck.
These wheel centers fit on completion of the stub axles.

FEATURES:
Changes missing out on or damaged hex wheel centers
Hubs are made from molded black plastic
Axle pins are steel

SUCHES AS:
2 Hex Wheel Hubs
2 2.5x12mm axle pins

REQUIRES:
Inserting pins through stub axles (4953) and positioning wheel centers in
    recessed area of axle carriers (4932).

This item praises the above gone over item.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt guards

SUCHES AS:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside size: 3/16" (5mm)
Outdoors size: 7/16" (11mm)
Width: 5/32" (4mm)

Want one more excellent item to compliment the above pointed out item?



5200mAh 50C for under $50!
This 2-cell 5200mAh 50C lipo is best for 1/10 scale automobiles, trucks, and buggies! Functions a huge capacity for prolonged run times and an enormous C score so you'll have all the power you'll ever need. Consists of a Traxxas-type connector on the discharge leads.
Features

High-end efficiency and reliability at a cost effective rate
Perfect for 1/10 scale automobiles, trucks, and buggies
Great choice for the Traxxas Slash and Slash 4X4 designs, E-Maxx Brushless Edition, E-Revo Brushless Edition, and Spartan
Functions a huge capacity for prolonged run times and an enormous C score so you'll have all the power you'll ever need
Consists of a Traxxas connector on the discharge leads

Compatible With:

Traxxas Slash and Slash 4X4 designs
Traxxas E-Maxx Brushless Edition
Traxxas E-Revo Brushless Edition
Traxxas SpartanTraxxas E-Maxx 1/10 scale 4WD Electric Beast Truck (#3903)
Traxxas E-Revo 1/10 scale 4WD Beast Truck (#5603)
Traxxas 1/10 Brushless Rally Racer (#7407)
Traxxas 1/10 scale brushless professional 4WD brief course race trucks including: Slash 4x4 (#6068L), Platinum(# 6804R), and Ultimate (#6807)
Traxxas 1/10 scale brushless professional 2WD brief course race trucks including: Slash (#5805) & (#5803), Slash VXL (#5807L)
Traxxas 1/10 scale 4WD Severe surface monster truck Top (#5607L)

Specs

Length: 138 mm
Width: 47 mm
Height: 25 mm
Weight: 266 g