Traxxas Suspension Arms Rear Slash 2Wd Rustler Stampede F/R Slash 4X4

This is the Left and Right Suspension Arms for the Traxxas Slash 4x4.

FEATURES:
Solidified plastic construction
Front or rear application

CONSISTS OF:
One left suspension arm
One right suspension arm

NEEDS:
Setup on suspension assembly

SPECIFICATIONS:
Length: 100mm (3.94")
Width: 45mm (1.77")
Density: 11.5mm (0.45")

Right here is a great product that several others have bought at the same time.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt guards

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)

You will certainly love this item if you have the item previously mentioned.

Motor Titan 12T 550 (12-Turns)

    This is the Traxxas Titan 550 12 Turn Electric Motor.

FEATURES:
Stock motor supplied with the Traxxas Stampede and Rustler series
Preinstalled leads, capacitors and ports

CONSISTS OF:
Traxxas Titan 550 Motor, 2 capacitors and 2 leads with ports

NEEDS:
Setting up in automobile

SPECIFICATIONS:
Can Diameter: 1.25" (38mm)
Shaft Diameter: 0.12" (3mm)
Length Including Shaft: 3.2" (81mm)
Length Not Including Shaft: 2.3" (57.5mm)
Specs such as RPM are not supplied

This product is regularly gotten with the above discussed product.

Nerf Bars, Chassis (Slash)

These are the replacement Nerf Bars for the 2WD Traxxas Slash.

FEATURES:
Black plastic construction

CONSISTS OF:
2 Nerf Bars for the Traxxas Slash

NEEDS:
Setup onto Vehicle

Often gotten with the product that you are currently checking out.

Rubber Diaphragms (4)

These rubber cap diaphragms for Traxxas plastic shocks, also work well
with Associated aluminum shocks. Qty-4

Get this product to enhance the one you read around.

3 X 15Mm Button Hex Screw (6)

This is a bundle of six 3x15mm Traxxas Button Head Screws.

FEATURES:
Steel construction, Black in color
Used on the Traxxas Revo monster truck, can also be used in any
    application where a 3x15mm button head screw is required

CONSISTS OF:
Six 3x15mm Traxxas Button Head Screws

NEEDS:
2mm hex head wrench, GPMR8011

SPECIFICATIONS:
Length: 15mm
Diameter: 3mm

Get this product to enhance the one you read around.

30Wt Silicone Shock Oil, 2Oz

This is a bottle of ASSOCIATED silicone shock oil used with oil shocks.

FEATURES:
100% pure silicone oil
Will not thin out in hot weather or thicken up in winter

CONSISTS OF:
One bottle of silicone oil

SPECIFICATIONS:
30wt (the higher the weight number the thicker the oil)
2 oz. bottle

Lots of others have gotten this product along with the product that you are currently checking out.

LiPo Onyx 3S 11.1V 1300mAh 25C Soft Case TRA

This is the Duratrax Onyx 11.1V 1300mAh 25C Soft Case LiPo Battery
with the Traxxas Plug.

FEATURES:
Ideal for 1/16 scale automobile applications
Prewired with Traxxas high present connector

CONSISTS OF:
11.1V 1300mAh 25C Soft Case LiPo Battery with Traxxas High Current
    Port

NEEDS:
Balancer and LiPo compatible battery charger or LiPo battery charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECIFICATIONS:
Voltage Score: 11.1V
Ranked Capability: 1300mAh
Release Score: 25C constant
Measurements: 1.2 x 0.7 x 3.5" (31 x 17 x 90mm)
Weight: 3.8oz (108g)
Discharge Lead/Connectors: 14AWG Wires 3.9" (100mm), Traxxas Plug
Stabilizing Port: ElectriFly
Watt Hours: 14Wh

REMARKS:
ALWAYS utilize a LiPo-approved Charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "RELEASE" lead
NEVER Trickle Charge
NEVER enable to Release below 2.5V per cell
NEVER take apart or customize pack circuitry in any method or leak cells
NEVER place on flammable materials or leave ignored during
    charging
ALWAYS Charge in a fire-resistant location
ALWAYS set battery charger's output volts to match battery volts
CONSTANTLY shut out of reach of children
All weights include wire leads and plugs
All weights +/- 1 g
All measurements +/- 1 mm