Traxxas Steering Blocks, Left & Right

These are the Steering Blocks for the Traxxas Slash 4x4.

FUNCTIONS:
Hardened plastic construction
Black in color

INCLUDES:
Two steering blocks

REQUIRES:
Setup on steering assembly

SPECS:
Length: 35mm (1.38")
Width: 32mm (1.26")

You will certainly love this item if you have the item earlier discussed.

Caster Blocks (C-Hubs), Left &

These are the Caster Blocks (C-Hubs) for the Traxxas Slash 4x4.

FUNCTIONS:
Hardened plastic construction
Black in color

INCLUDES:
One left caster block
One right caster block

REQUIRES:
Setup on Slash

SPECS:
Length: 49mm (1.93")
Width: 29.5mm (1.16")

Get this item to enhance the one you are reading about.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt guards

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

Want one more wonderful item to compliment the above discussed item?

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for usage on the Traxxas Revo.

FEATURES:
Steel Construction
Shielded with blue rubber seals

INCLUDES:
Two Ball Bearings

REQUIRES:
Assembly to automobile

SPECS:
Inner Diameter: 10mm
Outer Diameter: 15mm
Side Density: 4mm

REMARKS:
These bearings are utilized to support the Main Clutch (one needed).

Frequently purchased with the item that you are currently reviewing.

Driveshaft Assembly Front Heavy Duty Stampede 4X4

This is the Strong Driveshaft Assembly for the Slash 4x4 from Traxxas

FUNCTIONS:
Black plastic and steel construction

INCLUDES:
Front driveshaft assembly
Screw pin

REQUIRES:
Setup on automobile

Below is one more item that praises the item being discussed.

Stub Axle Housing (2)

These are the axle housings (or hub carriers) utilized on the: Rad 2, Hawk 2,
Eagle, Blue Eagle LS II and Nitro Rustler. The housings are formed of
black nylon.

Includes: 2 axle housings

pcd 01/23/94

Below is a wonderful item that several others have purchased the very same time.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Strong Driveshaft Assembly for the Slash 4x4 from Traxxas

FUNCTIONS:
Black plastic and steel construction

INCLUDES:
Rear driveshaft assembly
Screw pin

REQUIRES:
Setup on automobile

The below item additionally pairs really well with the item being discussed.

Hex Hubs Blue Alum (2) Slash

These are Optional Blue Anodized Aluminum Wheel Hex Hubs for Traxxas automobiles
such as the Stampede, Rustler, 4-Tec, and other older Traxxas kits.

FEATURES:
Blue aluminum construction

INCLUDES:
Two hex centers
Four axle pins

REQUIRES:
Assembly onto axles.

SPECS:
Hex Length: 12mm (.47")
Hex Density: 6.1mm (.24")
Axle Pin Length: 9.6mm (.38")

REMARKS:
These centers might be utilized with other automobiles utilizing the exact same
    pin/hex design. These centers Will Not work on the T-Maxx or E-Maxx.

This item is regularly purchased with the above discussed item.

49Mm Turnbuckles Camber Link Rr

These are the Traxxas 49mm Turnbuckle Camber Links
for the Bandit, Rustler VXL and Stampede VXL.

FEATURES:
Metal and Nylon Construction
Silver and Black in Color
Assembled w/Rod Ends

INCLUDES:
Two rear 49mm (82mm center to center) turnbuckles

REQUIRES:
Setup on the automobile

This item is regularly purchased with the above discussed item.

39Mm Camber Link Turnbuckles (Fr) Slash, Bandit, Stampede

These are the 39mm Turnbuckle Camber Links
for the Traxxas Stampede and Rustler VXL.

FEATURES:
Metal and Nylon Construction
Silver and Black in Color
Assembled w/Rod Ends

INCLUDES:
Two front 39mm (69mm center to center) turnbuckles and guideline
    sheet

REQUIRES:
Setup on the automobile