Traxxas Spur Gear (86T) 48P

This is a Traxxas 48P, 86T Spur Equipment for designs with
Torque Control Slipper Clutch.

FEATURES:
48 pitch
86 tooth
Developed for designs with a slipper clutch.
Black plastic building and construction

INCLUDES:
One spur equipment

SPECIFICATIONS:
Pitch: 48
Tooth: 86

COMMENTS:
For this slipper clutch design there is also a 76T equipment (TRAC4676),
    83T equipment (TRAC4683) and 90T equipment (TRAC4690).

Several others have actually acquired this thing in addition to the thing that you are currently checking out.

Spur Gear (83T) 48P

This is a 48P, 83T Stimulate Equipment for designs with
Traxxas Torque Control Slipper Clutch.

FEATURES:
48 pitch
83 tooth
Developed for designs with a slipper clutch.
Black plastic building and construction

INCLUDES:
One spur equipment

SPECIFICATIONS:
Pitch: 48
Tooth: 83

COMMENTS:
For this slipper clutch design there is also a 76T equipment (TRAC4676),
    86T equipment (TRAC4686) and 90T equipment (TRAC4690).

Want an additional excellent thing to enhance the above mentioned thing?

23T Pinion 48P

This is a 23 Tooth 48 Pitch Pinion Equipment By Traxxas

FUNCTIONS:
Pinion equipment with set screw, Silver in color

INCLUDES:
(1) 23 Tooth 48 Pitch Pinion Equipment
(1) One 4mmx2mm set screw

NEEDS:
Installation

SPECIFICATIONS:
Outer Diameter: 14mm (9/16")
Inner Diameter: 11mm (7/16")

This thing is often acquired with the above mentioned thing.

Spur Gear (90T) 48P

This is a Traxxas 48P, 90T Spur Equipment for designs
with Torque Control Slipper Clutch.

FEATURES:
48 pitch
90 tooth
Developed for designs with a slipper clutch
Black plastic building and construction

INCLUDES:
One spur equipment

SPECIFICATIONS:
Pitch: 48
Tooth: 90

COMMENTS:
For this slipper clutch design there is also a 76T equipment (TRAC4676),
    83T equipment (TRAC4683) and 86T equipment (TRAC4686).

The below thing additionally sets actually well with the thing being gone over.

Shaft Slipper Clutch

This is a Slipper Clutch Shaft for the Traxxas Rustler XL
and Stampede XL.

FEATURES:
Steel building and construction
_
Roll pin pre-installed

INCLUDES:
One slipper clutch set

SPECIFICATIONS:
Length: 1.98" (50mm)
Diameter: .21" ( 5mm)

COMMENTS:
This part will fit both the requirement and XL variation of the Rustler
or Stampede.

This thing compliments the above gone over thing.

Rebuild Kit, Slipper Clutch (S

This is the Slipper Clutch Rebuild Set for the Traxxas Slash 4x4 Vehicles.

FEATURES:
Steel building and construction

INCLUDES:
One Steel Disc
Three Friction Pads
Two Springs
One 4mm Lock Nut
One 5mm Lock Nut
Instructions

NEEDS:
Disassembly of slipper clutch

This is a great addition to the thing currently being gone over.

Alum Slipper Pressure Plate & Hub Jato

These are the Slipper Press Plate and Center
for the Traxxas Nitro Jato Arena Truck.

FEATURES:
Pot Metal Building
Silver in Color

INCLUDES:
One Slipper Press Plate
One Slipper Press Plate Center

NEEDS:
Assembly onto Automobile

Right here is a excellent thing that several others have actually bought at the same time.

Pinion Gear 48P 25T

This equipment is a steel pinion equipment in 48 pitch

Features: Brass pinion equipment

Consists of: 1 equipment and 1 set screw

Specs: Steel, 48 pitch, 25 tooth pinion equipment.
    Shaft length- 3/16" Equipment length- 1/4" General length- 7/16"
    Shaft diameter- 1/4" Equipment diameter- 1/2"
    Mounting shaft (motor shaft) 1/8"