Traxxas 23T Pinion 48P

This is a 23 Tooth 48 Pitch Pinion Gear By Traxxas

FEATURES:
Pinion gear with set screw, Silver in color

CONSISTS OF:
(1) 23 Tooth 48 Pitch Pinion Gear
(1) One 4mmx2mm set screw

NEEDS:
Installation

SPECIFICATIONS:
Outer Diameter: 14mm (9/16")
Inner Diameter: 11mm (7/16")

Often gotten with the product that you are currently reviewing.

Spur Gear (86T) 48P

This is a Traxxas 48P, 86T Spur Gear for designs with
Torque Control Slipper Clutch.

FEATURES:
48 pitch
86 tooth
Created for designs with a slipper clutch.
Black plastic building

CONSISTS OF:
One spur gear

SPECIFICATIONS:
Pitch: 48
Tooth: 86

COMMENTS:
For this slipper clutch design there is also a 76T gear (TRAC4676),
    83T gear (TRAC4683) and 90T gear (TRAC4690).

You will certainly enjoy this product if you have the product earlier stated.

19T Pinion 48P

This is a Traxxas 19T 48P Pinion Gear.

FEATURES:
Metal building
Grey in color

CONSISTS OF:
One 19T 48P Pinion Gear
One Set Screw

NEEDS:
Installation

This product praises the main item right here.

Alum Slipper Pressure Plate & Hub Jato

These are the Slipper Press Plate and Center
for the Traxxas Nitro Jato Arena Truck.

FEATURES:
Pot Metal Construction
Silver in Color

CONSISTS OF:
One Slipper Press Plate
One Slipper Press Plate Center

NEEDS:
Assembly onto Automobile

Want one more fantastic product to compliment the above mentioned product?

Rebuild Kit, Slipper Clutch (S

This is the Slipper Clutch Rebuild Set for the Traxxas Slash 4x4 Vehicles.

FEATURES:
Steel building

CONSISTS OF:
One Steel Disc
Three Friction Pads
Two Springs
One 4mm Lock Nut
One 5mm Lock Nut
Directions

NEEDS:
Disassembly of slipper clutch

Below is one more product that praises the product being discussed.

Extended Fr/Re Body Mounts Slash 2WD

This is the optional Pro-Line Extended Body Mount Set for the
1/10 scale Traxxas Slash 2WD Short Course Trucks.

FEATURES:
Adjustable front and rear body mounts enable a wide variety of bodies
    to be used suching as rally car bodies
Constructed of nylon, black in color
Screw-on body mount system removes metal clips

CONSISTS OF:
Front and Rear Body Mounts and Posts with Installing Hardware

You will certainly enjoy this product if you have the product earlier stated.

Pinion Gear 16T 48P W/Screw Set

    This is the 16 Tooth 48 Pitch Pinion Gear from Traxxas.

FEATURES:
Steel building

CONSISTS OF:
16 Tooth 48 Pitch Pinion Gear with set screw

NEEDS:
Setting up on motor shaft

SPECIFICATIONS:
Variety of Pearly whites: 16T
Pitch: 48
Inner Diameter: 0.12" (3mm)

Often gotten with the product that you are currently reviewing.

Sealed Receiver Box (Slash)

This is the Receiver Box for the 2WD Traxxas Slash Truck.

FEATURES:
Changes damaged receiver boxes
Constructed of black plastic

CONSISTS OF:
One top and bottom half receiver box for the Traxxas Slash
Hardware

NEEDS:
Setting up receiver and bolting receiver box to chassis.

The below product additionally sets truly well with the product being discussed.

Nerf Bars, Chassis (Slash)

These are the replacement Nerf Bars for the 2WD Traxxas Slash.

FEATURES:
Black plastic building

CONSISTS OF:
Two Nerf Bars for the Traxxas Slash

NEEDS:
Installation onto Automobile

Want one more fantastic product to compliment the above mentioned product?

Hold Down, Battery Slash

This is the Hold Down Battery Set for the 2WD Traxxas Slash.

FEATURES:
Black nylon building

CONSISTS OF:
One Battery Hold Down
One Retainer Hold Down
One Battery Post
One Foam Spacer
One Angled Body Clip

NEEDS:
Installation on the chassis