Traxxas Spring Preload Spacers

This is the Traxxas replacement #3769 Spring Pre-Load Spacers
that has the Stampede and Rustler trucks along with the
Black Long Shocks (TRAC9160) and Black XX-Long shocks (TRAC9162).

FUNCTIONS:
Made from a black plastic/nylon material.
Used to assist pre-load the shock springs.
This is set up on the top of the shock springs.
Enough for 1 pair of shocks.

INCLUDES:
2 spacers 1mm thick
2 "" 2mm ""
2 "" 3mm ""
2 "" 4mm ""
COMMENTS:
Resembles a letter "C"
Likewise fits shocks with a 13.5mm outside diameter body.

AXY
3/25/95

The below thing additionally sets actually well with the thing being gone over.

Maxx Series Body Clips 12Pc

These are the Body Clips for the Traxxas E-Maxx and T-Maxx Trucks.

FEATURES:
Steel building and construction
Natural refined color

CONSISTS OF:
Twelve Body Clips

SPECIFICATIONS:
Length: 26mm

Want an additional fantastic thing to match the above pointed out thing?

Springs White (Rr) (2)

This is a set of Traxxas White Back Springs.

FEATURES:
Painted white
Steel building and construction

CONSISTS OF:
Two springs

SPECIFICATIONS:
Length: 3.19" (81mm)
Inside diameter: .61" (15mm)
Outdoors diameter: .71" (18mm)

This thing praises the main item here.

Red Springs 2.5 Rate 2Pc

These are the Replacement Springs for the Traxxas T-Maxx.
These mount to the Shocks and provide the damper for the Suspension.

FEATURES:
Spring Steel Building
Red in Color
Medium Tension

CONSISTS OF:
Two Red Medium Springs

NEEDS:
Assembly onto T-Maxx

SPECIFICATIONS:
Length: 3.25" Uncompressed
1.20" Compressed JiM 8.02.02
Diameter: .75" ir/kh
Wire Diameter: 1/16" 8/05/02

You will certainly enjoy this product if you have the product earlier pointed out.

Steering Blocks L&R Slash/ Rustler/Stampede/Bandit

These are the Left and Right Guiding Blocks
for the Traxxas Bandit, Stampede and Rustler VXL series.

FEATURES:
Plastic building and construction
Black in color

CONSISTS OF:
One left and ideal steering obstructs

NEEDS:
5x11x4mm bearings (DTXC1547)

You will certainly enjoy this product if you have the product earlier pointed out.

Hex Wheel Hubs

This is the Set of Hex Wheel Centers for the Traxxas T-Maxx 4WD RTR Monster Truck.
These wheel centers fit on the end of the stub axles.

FEATURES:
Changes missing or damaged hex wheel centers
Centers are made from molded black plastic
Axle pins are steel

CONSISTS OF:
Two Hex Wheel Centers
Two 2.5x12mm axle pins

NEEDS:
Inserting pins through stub axles (4953) and placing wheel centers in
    recessed area of axle providers (4932).

You will certainly enjoy this product if you have the product earlier pointed out.

Axle Pins 2.5 X 12Mm 4

This is the Set of Axle Pins for the Traxxas T-Maxx 4WD RTR Monster Truck.
These pins go through the stub axles on each wheel,
the wheel centers are then positioned over these pins.

FEATURES:
Changes missing axle pins
Axle pins are steel

CONSISTS OF:
4 2.5x12mm axle pins

NEEDS:
Inserting pins through stub axles (4953) and setting up wheel centers
    (4954) over pins.