Traxxas Slash Big Bore Shocks

This is the optional Big Bore Shock Set for the
2WD Traxxas Slash.
These change the plastic shocks that come stock with the kit.

FEATURES:
Strong aluminum building, covered
Anodized black with white springs
Completely put together

CONSISTS OF:
4 completely put together shocks with white springs
Mounting hardware
One bottle of silicone oil

NEEDS:
Filling shocks with shock oil and assembling onto the model

The below item also pairs truly well with the item being reviewed.

Front Or Rear A-Arms For Traxxas Slash 4X4 And Rustler 4X4, Blac

These are the optional RPM Strong Front/Rear A-Arms
for the Traxxas Slash 4x4.

FUNCTIONS:
Black in color
Plastic constrution

CONSISTS OF:
Two Front/Rear A-Arms

NEEDS:
Installation at front or rear suspension

SPECIFICATIONS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at widest point
Thickness: 0.31" (8mm)

COMMENTS:
Likewise readily available in Blue (RPMC0705)

This item compliments the main item here.



These are the Pro-Line Back Split Sixer Red Bead-Loc On Black Wheels.

FEATURES:
Fits the rear of the Traxxas Slash
front and rear of the Traxxas Slash 4x4
fornt and rear of the HPI Blitz
Nylon building
Red in color
Red bead-locs
*NOTE* - Pro-Line does NOT recommend these for use with brushless
systems

CONSISTS OF:
Two Back Split Sixer Wheels

NEEDS:
Tires

SPECIFICATIONS:
Outer Diameter: 2.2" (56mm)
Inner Diameter: 3.0" (76mm)
Width: 40.5mm (1.6")
Hex: 12mm

You will love this item if you have the item previously pointed out.



This is the DuraTrax Onyx 7.4V 5000mAh 25C Hard Case LiPo Battery
with the Traxxas Plug.

FEATURES:
Ideal for 1/10 scale car applications
Prewired with Traxxas high existing adapter

CONSISTS OF:
7.4V 5000mAh 25C Tough Case LiPo Battery with Traxxas Plug

NEEDS:
Balancer and LiPo suitable charger or LiPo charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECIFICATIONS:
Voltage Rating: 7.4V
Ranked Capacity: 5000mAh
Discharge Rating: 25C continuous
Dimensions: 1.77 x .94 x 5.4" (45 x 24 x 137mm)
Weight: 10.2oz (288g)
Discharge Lead/Connectors: 12AWG Wires, Traxxas Plug
Balancing Port: ElectriFly
Watt Hours: 37Wh

COMMENTS:
ALWAYS utilize a LiPo-approved Charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER Charge through the "To ESC or "RELEASE" lead
NEVER EVER Trickle Charge
NEVER permit to Discharge listed below 2.5V per cell
NEVER dismantle or modify pack circuitry in any way or leak cells
NEVER place on flammable materials or leave ignored during
    charging
ALWAYS Charge in a fireproof area
ALWAYS set charger's output volts to match battery volts
CONSTANTLY shut out of reach of children
All weights include wire leads and plugs
All weights +/- 1 g

The below item also pairs truly well with the item being reviewed.

Rear Shock Tower, For Traxxas Slash/Rustler/Stampede/Bandit

This is the RPM Back Shock Tower for the
Traxxas E-Stampede, E-Rustler and E-Bandit.

FUNCTIONS:
Tough nylon enhanced plastic building
Uses all stock hardware (for installing shocks etc.)

CONSISTS OF:
One rear shock tower

SPECIFICATIONS:
Width: 4.33" (110mm)
Height: 2.75" (70mm)
Thickness: 7mm