Traxxas Silicone Damper Oil

This is the replacement silicone damper oil that is consisted of in many of the
Traxxas sets. It is around 30 weight oil (Traxxas does not list precise
weight), can be found in a 1/2 oz (around) bottle and is clear.

Silicone damper (shock) oil is much better than petroleum shock oil because
silicone oil is not affected by temperature.

PACKAGE
INCLUDES: One around 1/2 ounce bottle.

Regularly gotten with the item that you are presently reading about.

Rubber Diaphragms (4)

These rubber cap diaphragms for Traxxas plastic shocks, likewise work well
with Associated aluminum shocks. Qty-4

The below item also pairs actually well with the item being gone over.

Shock Rebuild Big Bore/Ultra

This is a shock restore package for 2 Traxxas black plastic shocks. Consists of:

4 E-clips
2 C-clips
2 O-rings
8 Washers
2 Diaphrams

Want an additional excellent item to match the above stated item?

Spring Retainers

These are the Traxxas Spring Retainers for Traxxas Shocks.
This set includes the spring retainers that hold the springs in
place over the shock body and the piston heads that manage the quantity
of oil flow in the shock cylinder.

FEATURES:
Constructed of molded plastic.
Contains enough parts for two shocks.
Fits the shocks on most Traxxas nitro and electrical powered vehicles.
Two hole piston moving towards higher dampening or three hole piston head
    for softer spring performance.

INCLUDES:
One Traxxas Spring Retainer Set with:
    2 upper and two lower spring retainers
    2 2 hole piston head covers
    Two 3 hole piston head covers

REQUIRES:
Disassembly of shock to install parts.

Here is an additional item that praises the item being gone over.

Front Or Rear A-Arms For Traxxas Slash 4X4 And Rustler 4X4, Blac

These are the optional RPM Strong Front/Rear A-Arms
for the Traxxas Slash 4x4.

FUNCTIONS:
Black in color
Plastic constrution

INCLUDES:
2 Front/Rear A-Arms

REQUIRES:
Setup at front or rear suspension

SPECIFICATIONS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at widest point
Density: 0.31" (8mm)

REMARKS:
Also readily available in Blue (RPMC0705)

Here is an additional item that praises the item being gone over.

Rear Bearing Carrier For Traxxas Slash 4X4 Or Rustler 4X4, Black

These are optional Rear Bearing Carriers for the Traxxas Slash 4x4, Nitro
Rustler, Nitro Stampede, Nitro Sport, Rad2, Hawk 2 and Eagle/Eagle LSII.

FEATURES:
Nylon construction
Black in color

INCLUDES:
2 Rear Bearing Carriers
Decal

REQUIRES:
2 5x11x4mm ball bearings, DTXC1547

This item is regularly gotten with the above stated item.