Traxxas Shrt Rod Ends/Ball Cnnctr (6)

This are Rod Ends Short for the Nitro T-Maxx.
These rods ends attach to turnbuckles for front/rear.

FUNCTIONS:
Black nylon rod ends
Steel pivot balls

INCLUDES:
Six nylon rod ends
Six pivot balls

REQUIRES:
Turnbuckles: TRAC6338

SPECS:
Length: .695" (17.6mm)
Inner Diameter: .217" (5.5mm)

REMARKS:
Will work just for the Nitro T-Maxx.

This is a amazing addition to the product currently being reviewed.

3 X 15Mm Button Hex Screw (6)

This is a plan of 6 3x15mm Traxxas Button Head Screws.

FEATURES:
Steel building, Black in color
Used on the Traxxas Revo monster truck, can likewise be used in any
    application where a 3x15mm button head screw is required

INCLUDES:
Six 3x15mm Traxxas Button Head Screws

REQUIRES:
2mm hex head wrench, GPMR8011

SPECS:
Length: 15mm
Diameter: 3mm

Numerous others have actually gotten this product in addition to the product that you are currently reviewing.

Antenna Tube W/ Cap, Black

This is a conventional replacement Antenna Tube with Cap from Dubro
This product can be used anywhere an antenna tube is needed to support
a receiver antenna wire.

FEATURES:
Black plastic building

INCLUDES:
One antenna tube
One antenna tube cap
One receiver antenna wire sleeve

REQUIRES:
Nothing. This is a direct fit part for any boat, vehicle, etc. that utilizes
    a conventional size antenna tube.

SPECS:
Length: 12 1/4" (311mm)
Diameter: 1/8" (3.2mm)

You will certainly enjoy this thing if you have the thing just above pointed out.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Heavy Duty Driveshaft Assembly for the Slash 4x4 from Traxxas

FUNCTIONS:
Black plastic and steel building

INCLUDES:
Rear driveshaft assembly
Screw pin

REQUIRES:
Setup on automobile

Here is a terrific product that many others have actually bought at the very same time.

Tie Bar Fiberglass

This is a Firberglass Tie Bar by Traxxas for the SRT

FUNCTIONS:
Fiberglass Building

INCLUDES:
One Tie Bar

REQUIRES:
Suspension Pins (TRAC4940)

SPECS:
Length: 98.4 mm (3.875")
Width: 7.9 mm (0.3125")
Thickness: 2.0 mm (0.082")

REMARKS:
None

Want an additional terrific product to compliment the above stated product?

Rod Ends/Ball Connector (6)

These are 5.8mm ball ends and balls use in the LS II race truck kit.

Kit consists of: 6ea 5.8mm metal balls
6ea 5.8mm white nylon ball ends

pcd 01/10/94

The below product also pairs truly well with the product being reviewed.

Shock Rebuild Big Bore/Ultra

This is a shock reconstruct set for 2 Traxxas black plastic shocks. Suches as:

4 E-clips
2 C-clips
2 O-rings
8 Washers
2 Diaphrams

This product is often gotten with the above stated product.

Shock Shafts Chrome Xxl (2)

This is a set of XXL shock shafts for the Traxxas shocks.

Includes: 2 shock shafts

Functions: solidified chrome/steel building

Specs: 2 1/8" long or 54mm
1/16" size or 1.5mm

Requires: Extra long shocks

Remarks: These are threaded on one end, and have the slots for e-clips on the
other.

4/16/97
AST

This is a amazing addition to the product currently being reviewed.

Spring Retainers

These are the Traxxas Spring Retainers for Traxxas Shocks.
This set consists of the spring retainers that hold the springs in
restaurant over the shock body and the piston heads that manage the amount
of oil circulation in the shock cylinder.

FEATURES:
Constructed of molded plastic.
Contains enough parts for 2 shocks.
Fits the shocks on most Traxxas nitro and electric powered vehicles.
Two hole piston moving towards greater dampening or three hole piston head
    for softer spring performance.

INCLUDES:
One Traxxas Spring Retainer Set with:
    2 upper and 2 lower spring retainers
    2 2 hole piston head covers
    Two 3 hole piston head covers

REQUIRES:
Disassembly of shock to install parts.