Traxxas Rod Ends/Ball Connector (6)

These are 5.8mm ball ends and balls use in the LS II race truck kit.

Kit includes: 6ea 5.8mm metal balls
6ea 5.8mm white nylon ball ends

pcd 01/10/94

Regularly bought with the product that you are presently reading about.

46Mm Turnbuckles

These are replacement 36mm turnbuckles for Traxxas trucks.

Includes: 2- 36mm threaded turnbuckles w/nut for simple modification.
2- 2x6,2.5mm thick aluminum spacers

Comment: The spacers are for spacing the ball end away from the transmission
bulkhead.

You will certainly love this item if you have the item earlier discussed.



This is the Motor for the Latrax Rally Car from Traxxas.

FEATURES:
Stock replacement motor

SUCHES AS:
28 turn 370 size Brushed Motor

This product is regularly bought with the above pointed out product.

Motor Titan 12T 550 (12-Turns)

    This is the Traxxas Titan 550 12 Turn Electric Motor.

FEATURES:
Stock motor provided with the Traxxas Stampede and Rustler series
Preinstalled leads, capacitors and adapters

SUCHES AS:
Traxxas Titan 550 Motor, two capacitors and two leads with adapters

NEEDS:
Setting up in vehicle

SPECS:
Can Size: 1.25" (38mm)
Shaft Size: 0.12" (3mm)
Length Including Shaft: 3.2" (81mm)
Length Not Including Shaft: 2.3" (57.5mm)
Specs such as RPM are not provided

You will certainly love this item if you have the item earlier discussed.

Caster Blocks 30 Deg

This is a set of optional caster blocks for the TRAXXAS TRX-3 2wd electrical off
roadway racing buggy.

FEATURES:
Made from white nylon
For 30° caster

SUCHES AS:
One left caster block
One right caster block

COMMENTS:
These castor blocks mount onto the front A-arms and the steering
blocks mount onto the caster blocks.

Below is one more product that praises the product being gone over.

Shrt Rod Ends/Ball Cnnctr (6)

This are Rod Ends Short for the Nitro T-Maxx.
These rods ends connect to turnbuckles for front/rear.

FUNCTIONS:
Black nylon rod ends
Steel pivot balls

SUCHES AS:
6 nylon rod ends
6 pivot balls

NEEDS:
Turnbuckles: TRAC6338

SPECS:
Length: .695" (17.6mm)
Inner Size: .217" (5.5mm)

COMMENTS:
Will work just for the Nitro T-Maxx.

Below is a fantastic product that many others have actually purchased the exact same time.

Shock Tower Front Bandit / Slash / Stampede / Rustler

This is a stock replacement FRONT shock tower for the Traxxas Stampede.

FEATURES:
Made from black molded nylon
For the Traxxas Stampede

SPECS:
Height: 2 3/4"
Thickness: 1/4"
Width at base: 2 3/4"
Width at top: 2"

SUCHES AS:
(1) Front shock tower for the Traxxas Stampede

Regularly bought with the product that you are presently reading about.

Steering Blocks L&R Slash/ Rustler/Stampede/Bandit

These are the Left and Right Steering Blocks
for the Traxxas Bandit, Stampede and Rustler VXL series.

FEATURES:
Plastic construction
Black in color

SUCHES AS:
One left and best steering blocks

NEEDS:
5x11x4mm bearings (DTXC1547)

Below is a fantastic product that many others have actually purchased the exact same time.

82Mm Turnbuckles (2)

These are the Steering Turnbuckles for the Nitro Stampede.

FEATURES:
Steel construction (silver color)

SUCHES AS:
2 (2) turnbuckles

NEEDS:
Rod ends (TRAC4742)

SPECS:
Length: 82.4mm
Size: 3mm

You will certainly love this item if you have the item earlier discussed.

Turnbuckles 62Mm (2)

This is the replacement 62mm turnbuckles that come stock with the Traxxas
Nitro Hawk. These are utilized on the rear end of the truck(rear hubs).

Suches as: 2- 62mm turnbuckles with adjusting nuts.