Traxxas Shoulder Screws Ultra Shocks

These are the Shoulder Screws for the Traxxas T-Maxx 3.3.

FUNCTIONS:
Black steel building

INCLUDES:
Six steel shoulder screws

SPECIFICATIONS:
Length: 12mm
Diameter: 3mm

Often acquired with the product that you are currently checking out.

Metal Washers/12

These are 3x6mm Washers from Traxxas.

FEATURES:
Metal building

INCLUDES:
(12) Washers

SPECIFICATIONS:
Size: 3x6mm

This is a great enhancement to the product currently being reviewed.

3 X 15Mm Button Hex Screw (6)

This is a bundle of 6 3x15mm Traxxas Button Head Screws.

FEATURES:
Steel building, Black in color
Utilized on the Traxxas Revo monster truck, can likewise be used in any
    application where a 3x15mm button head screw is needed

INCLUDES:
Six 3x15mm Traxxas Button Head Screws

NEEDS:
2mm hex head wrench, GPMR8011

SPECIFICATIONS:
Length: 15mm
Diameter: 3mm

The listed below product additionally pairs actually well with the product being reviewed.

Spring Retainers

These are the Traxxas Spring Retainers for Traxxas Shocks.
This set contains the spring retainers that hold the springs in
place over the shock body and the piston heads that control the amount
of oil circulation in the shock cylinder.

FEATURES:
Constructed of molded plastic.
Contains enough parts for two shocks.
Fits the shocks on most Traxxas nitro and electric powered vehicles.
Two hole piston moving towards greater dampening or three hole piston head
    for softer spring performance.

INCLUDES:
One Traxxas Spring Retainer Set with:
    2 upper and two lower spring retainers
    2 2 hole piston head covers
    Two 3 hole piston head covers

NEEDS:
Disassembly of shock to set up parts.

Lots of others have actually acquired this product along with the product that you are currently checking out.

Hex Hubs & Axle Pins Slash

These are the replacement rear wheel adapters for the Hawk, Hawk 2, Bullet,
Sledgehammer, Eagle, and Blue Eagle LS. These are hex nuts that connect the
rear wheels to the axles.

INCLUDES:
2- plastic hex collars (wheel adapters)
4- stub axle pins

WAJ
1/16/93

Lots of others have actually acquired this product along with the product that you are currently checking out.

Maxx Series Body Clips 12Pc

These are the Body Clips for the Traxxas E-Maxx and T-Maxx Trucks.

FEATURES:
Steel building
Natural refined color

INCLUDES:
Twelve Body Clips

SPECIFICATIONS:
Length: 26mm

Often acquired with the product that you are currently checking out.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Strong Driveshaft Assembly for the Slash 4x4 from Traxxas

FUNCTIONS:
Black plastic and steel building

INCLUDES:
Rear driveshaft assembly
Screw pin

NEEDS:
Setup on automobile

Here is a excellent product that lots of others have actually purchased the very same time.

Wheelie Bar Mnt Stamp/Rust/Bandit

    This is an optional Wheelie Bar Mount for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of hardened plastic, black in color
Installs at back of chassis to hold wheelie bar arm and wheels in
    place

INCLUDES:
Put together optional Wheelie Bar Mount with mounting instructions and
    hardware

NEEDS:
Wheelie Bar Arm (TRAC9574)
Wheels and Axles (TRAC9576)

This product is regularly acquired with the above pointed out product.

Shock Rebuild Big Bore/Ultra

This is a shock restore package for 2 Traxxas black plastic shocks. Consists of:

4 E-clips
2 C-clips
2 O-rings
8 Washers
2 Diaphrams