Traxxas Rod Ends Revo Large W/ Hollow Balls

This is the Big Rod End Set for the Traxxas Revo.

FEATURES:
Plastic construction
Black in color
Metal Pivot Balls

INCLUDES:
12 Rod Ends
12 Pivot Balls

REQUIRES:
Assembly to vehicle

SPECS:
Length: 22mm (.88")
Width at ball joint: 10mm (.39")

Frequently acquired with the thing that you are currently reading about.

Toe Link 5.0Mm Steel Frnt Or Rr (2) Revo

This is a set of replacement Toe Links for the Traxxas Revo Truck.
    These change the position of the toe on the vehicle.

FEATURES:
Steel turnbuckle design
5.0mm size

INCLUDES:
Two front or rear toe links

REQUIRES:
Absolutely nothing. These are direct replacement parts.

SPECS:
Length: 5.1" (129mm)

Want an additional fantastic thing to compliment the above mentioned thing?

Turnbuckles Toe Links Rr 5Mm (

These are the Rear Turnbuckles/Toe Links for the Traxxas 3.3 T-Maxx, TRAC78**.

FEATURES:
Constructed of steel, refined natural surface

INCLUDES:
Two Rear Turnbuckles/Toe Links for the Traxxas 3.3 T-Maxx.

REQUIRES:
Setting up in between wheel centers and rear bulkheads

SPECS:
Length: 4.9" (125mm)
Size: 0.20" (5mm)

REMARKS:
Fits just the 3.3 variation of the T-Maxx.

Want an additional fantastic thing to compliment the above mentioned thing?

Front Bumper Slayer

This is the Front Bumper and Mount for the
    Traxxas Slayer Pro 4WD Short Course Nitro RTR

FEATURES:
Nylon construction
Black in color

INCLUDES:
One Front Bumper
One Bumper Mount
Two 3x25mm Button Cap Screws
Two 4x10mm Button Cap Screws

REQUIRES:
Setup on the vehicle

Below is a fantastic thing that lots of others have purchased the very same time.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt shields

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

Below is a fantastic thing that lots of others have purchased the very same time.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for use on the Traxxas Revo.

FEATURES:
Steel Building
Protected with blue rubber seals

INCLUDES:
Two Ball Bearings

REQUIRES:
Assembly to vehicle

SPECS:
Inner Size: 10mm
External Size: 15mm
Side Thickness: 4mm

REMARKS:
These bearings are used to support the Primary Clutch (one needed).

This thing is regularly acquired with the above mentioned thing.

Rod Ends (12) / Hollow Balls (12) Jato

    These are the Rod Ends and Balls for the Traxxas Jato.

FEATURES:
Black nylon construction.
Steel hollow balls.

INCLUDES:
Twelve rod end/balls

REQUIRES:
Setting up on Jato

SPECS:
Length: 1-1/8" (28mm)
Width: 3/8" (9mm)

The below thing additionally sets truly well with the thing being gone over.

39Mm Camber Link Turnbuckles (Fr) Slash, Bandit, Stampede

These are the 39mm Turnbuckle Camber Links
for the Traxxas Stampede and Rustler VXL.

FEATURES:
Metal and Nylon Building
Silver and Black in Color
Put together w/Rod Ends

INCLUDES:
Two front 39mm (69mm center to center) turnbuckles and guideline
    sheet

REQUIRES:
Setup on the vehicle

This thing is regularly acquired with the above mentioned thing.



This is a optional Racers Edge Aluminum single arm servo horn, intended for use with Futaba servos. This strong aluminum servo horn is comparable in design to the Racers Edge Pro Adjustable servo horns, but features a 3rd linkage mounting point and does not utilize lock down screws.