Traxxas 10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for use on the Traxxas Revo.

FEATURES:
Steel Building
Protected with blue rubber seals

CONSISTS OF:
Two Ball Bearings

NEEDS:
Assembly to automobile

SPECIFICATIONS:
Inner Diameter: 10mm
Outer Diameter: 15mm
Side Thickness: 4mm

REMARKS:
These bearings are used to support the Primary Clutch (one required).

This item compliments the main item right here.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt guards

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

Want an additional terrific item to enhance the above pointed out item?

6 X 12 X 4Mm Ball Bearing (2) Blue Rubber Sheild R Evo

This is a 6X12mm Ball Bearing Set from Traxxas.

FEATURES:
Steel construction
Blue rubber dirt guards

CONSISTS OF:
(2) ball bearings, Part #5117

SPECIFICATIONS:
Inside size: 6mm
Outside size: 12mm
Width: 4mm

REMARKS:
This bearing set is used in the transmission and differentials of
    the Revo.

Below is an additional item that compliments the item being gone over.

8 X 16 X 5Mm Ball Bearing (2) Blue Rubber Sheild R Evo

    These are the replacement Differential Bearings for
the Traxxas Nitro Revo Beast Truck.

FEATURES:
Stainless Building
Blue Rubber Sealed

CONSISTS OF:
Two 8mm x 16mm Rubber Sealed Bearings

NEEDS:
Assembly onto Car

SPECIFICATIONS:
Inner Diameter: 8mm (0.31")
Outer Diameter: 16mm (0.62")
Thickness: 5mm (0.19")

You will certainly like this item if you have the item just above mentioned.

12 X 18 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

    These are the replacement Wheel Center Ball Bearings for
the Traxxas Nitro Revo Beast Truck.

FEATURES:
Stainless Steel Building
Blue Rubber Sealed

CONSISTS OF:
Two 12mm x 18mm Blue Sealed Stainless Wheel Center Bearings

NEEDS:
Assembly onto Car

SPECIFICATIONS:
Outer Diameter: 18mm (0.70")
Inner Diameter: 12mm (0.47")
Thickness: 4mm (0.15")

REMARKS:
These are for the Inside of the Wheel Centers, the Truck Needs
Four Total of these Bearings.

Often bought with the item that you are presently reviewing.

54T 0.8 P Spur Gear

This is the 54 Tooth Spur Equipment
for the Traxxas Nitro Jato Arena Truck.

FEATURES:
Nylon construction
Black in color
.8 Module pitch

CONSISTS OF:
One 54T 0.8 Pitch Spur Equipment

NEEDS:
Assembly onto automobile

The listed below item also sets really well with the item being gone over.

Gear Set, Differential

This is the Differential Equipment Set for the Traxxas Revo and E-Maxx.

FUNCTIONS:
Steel construction

CONSISTS OF:
Two Output Gears
Two Spider Equipments
Spider Gear Shaft and Diff Carrier Support
Instruction Sheet

NEEDS:
Diff lube;
10K weight TRAC5135 50K weight TRAC5137
30K weight TRAC5136 Multi-weight set TRAC9136

Want an additional terrific item to enhance the above pointed out item?

Alum Bearing Adapter Slash 4X4

This is an optional Bearing Adapter for the Slash 4X4.

FUNCTIONS:
6061-T6 anodized blue aluminum construction
Steel 10x15x4mm ball bearing with blue rubber seal
Used on slipper shaft

CONSISTS OF:
One aluminum adapter
One 10x15x4mm ball bearing

NEEDS:
Installation on to slipper shaft
Remaining clutch pieces

Below is an additional item that compliments the item being gone over.

Diff Ring Gear / Pinion Gear Revo

This is the Differential Ring Equipment and Pinion
for use with the Traxxas Revo 3.3.

FUNCTIONS:
Direct replacement part

CONSISTS OF:
One differential ring gear
One pinion gear

NEEDS:
Traxxas Revo 3.3
2.5x8mm cap head screws (TRAC3965)