Traxxas Ring/Pinion Diff Gear E/T Maxx

This is the Ring Gear and Parts for the Traxxas T-Maxx
4WD Radio Control Monster Truck.
These ring and pinion gears are set up in the front diff housing.

FEATURES:
Replaces used differential gears
Ring gear, pinion, washer and screws are built of steel.
Differential provider is made from plastic.

INCLUDES:
One 37 tooth ring gear.
One 13 tooth pinion gear.
One differential carrier.
One 6x10x0.5mm washer.
Four device screws.

REQUIRES:
Disassembly of differential real estates and connecting the ring gear to
    the differential provider permitting the differential gears to mesh.

Want another wonderful item to compliment the above pointed out item?

Screws 3 X 15Mm Cntrsnk Mchn 6

These are countersunk Device Screws from Traxxas.

FEATURES:
stainless-steel building and construction
phillips drive
replacement screws used on the Traxxas LS-II

INCLUDES:
(6) Screws

SPECIFICATIONS:
Size: 3x15mm

REMARKS:
when screwed-in the head of the screw is normally flush with
the surface

Here is another item that compliments the item being talked about.

6 X 12 X 4Mm Ball Bearing (2) Blue Rubber Sheild R Evo

This is a 6X12mm Ball Bearing Set from Traxxas.

FEATURES:
Steel building and construction
Blue rubber dirt guards

INCLUDES:
(2) ball bearings, Part #5117

SPECIFICATIONS:
Inside size: 6mm
Outside size: 12mm
Width: 4mm

REMARKS:
This bearing set is used in the transmission and differentials of
    the Revo.

This item is regularly bought with the above pointed out item.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for use on the Traxxas Revo.

FEATURES:
Steel Building and construction
Shielded with blue rubber seals

INCLUDES:
Two Ball Bearings

NEEDS:
Assembly to vehicle

SPECIFICATIONS:
Inner Size: 10mm
Outer Size: 15mm
Side Thickness: 4mm

REMARKS:
These bearings are used to support the Main Clutch (one required).

Several others have actually bought this item along with the item that you are currently checking out.

Fuel Tank T Maxx

This is the updated stock replacement fuel tank for the Traxxas T-Maxx
The fuel tank holds the fuel and screws straight to the chassis

This tank has been updated and No More has a PRIMER BUTTON

FUNCTIONS:
Clear, nylon building and construction
Black fuel tank cap (spring filled)

INCLUDES:
One fuel tank
One Pre-installed cover with spring
One Pre-installed pressure tap

NEEDS:
Assembly on to Traxxas T-Maxx

SPECIFICATIONS:
Length: 68.4mm (2.70")
Width: 62.3mm (2.46")
Capability: 125cc
Height (consisting of chassis installs, to top of cover): 84mm (3.30")
Center to Center Range in between installing holes: 43.3mm/38.2mm

REMARKS:
This fuel tank is distinct to the T-Maxx and is unknowned to fit any
    other vehicles.
If a Rebuild Set is required for this tank, oder TRAC4959.

This is a superb addition to the item currently being talked about.

Glow Plug S-Dty Long/Med

This is the Traxxas Super Duty Long Glowplug.

FEATURES:
Suitable for all Traxxas engines consisting of the 2.5, 2.5R and 3.3 engines
Matched for the diverse throttle variety of off-road racing
Medium heat variety

INCLUDES:
One Traxxas Medium Heat Range Super Duty Long Glowplug with gasket

NEEDS:
Plug wrench (HCAP2550) for setting up in cylinder head
Glow Fuel with 10%-20% nitro material