Traxxas Planet Gears & Shafts

These are the replacement planetary gear and shafts for the Rad 2 and Hawk 2.

FUNCTIONS:
All these gears and shafts are made from metal(probably with a low
amount of steel).

INCLUDES:
4- planetary gears
4- planteary gear shafts
2- sun gears
1- sun gear alignment shaft

WAJ
1/16/94

Get this item to improve the one you are reading about.

Sealed Aluminum Differential Case For Traxxas 2Wd Electric

This is the optional Hot-Racing Aluminum Differential Case
for the Traxxas Bandit, Rustler, 2WD Stampede, 2WD Slash
and Beast Jam Vehicles

FUNCTIONS:
CNC aluminum building and construction diff case, black in color
Hardened steel gear
Sealed differentials allows tuning to track conditions by changing
    weight of diff oil
4 O-rings help seal versus fluid leak
Thirty day minimal warranty beginning at date of purchase- valid
    in the United States only

INCLUDES:
Sealed Differential Case
4 O-Rings
2 Screws

SPECIFICATIONS:
Outside Diameter: 1.48" (37.5mm)
Shaft Diameter: .200" (5.10mm)
Total Thickness: 0834" (21.2mm)

Many others have purchased this item together with the item that you are presently reading about.

Shaft Slipper Clutch

This is a Slipper Clutch Shaft for the Traxxas Rustler XL
and Stampede XL.

FEATURES:
Steel building and construction
_
Roll pin pre-installed

INCLUDES:
One slipper clutch set

SPECIFICATIONS:
Length: 1.98" (50mm)
Diameter: .21" ( 5mm)

COMMENTS:
This part will fit both the requirement and XL version of the Rustler
or Stampede.

Below is another item that praises the item being discussed.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt guards

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)

You will love this thing if you have the thing above stated.

Teflon Washers 5 X 8Mm (20)

These are Replacement Washers from Traxxas.

FEATURES:
Black plastic construction.
Used on the axles and in the transmission.

INCLUDES:
(20) Washers

SPECIFICATIONS:
Size: 5x8mm
Thickness: 0.5mm

This item is often purchased with the above pointed out item.

Composite Gear Case With Aluminum Motor Plate

This is the Hot Racing Composite Gear Case with Aluminum Motor Plate
for the Traxxas 1/10 Bandit, Rustler, 2WD Stampede, and 2WD Slash.

FEATURES:
Light weight carbon fiber composite transmission case
Longer motor mounting slots for more gear ratio combinations
CNC 6061 aluminum motor plate, heat sink and arm mount
Larger open area for a larger motor heat sink
Thirty day minimal warranty beginning at date of purchase-valid
    in the United States only

INCLUDES:
Transmission Case with Heat Sink Motor Plate and Arm Mount

Often purchased with the item that you are presently reading about.

Main Diff W/ Steel Ring Gear/ Side Cover Plate/ Sc Rews (Ban

This is the Main Diff with Steel Ring Gear from Traxxas
for the Bandit, Stampede and Rustler VXL series.

Includes: Main diff with steel ring gear
Side cover plate
Screws
Instructions

Requires: Installation on the automobile

Many others have purchased this item together with the item that you are presently reading about.

Steel Top Drive Gear 22T

This is the 22 tooth, hardened steel leading drive gear that fits a number of Traxxas
automobiles. .
Includes: 1 gear only