Traxxas Metal Washers/12

These are 3x6mm Washers from Traxxas.

FEATURES:
Metal building

SUCHES AS:
(12) Washers

SPECS:
Size: 3x6mm

The below product additionally sets actually well with the product being discussed.

Teflon Washers 5 X 8Mm (20)

These are Replacement Washers from Traxxas.

FEATURES:
Black plastic construction.
Used on the axles and in the transmission.

INCLUDES:
(20) Washers

SPECS:
Size: 5x8mm
Density: 0.5mm

Right here is an additional product that compliments the product being discussed.

Shoulder Screws Ultra Shocks

These are the Shoulder Screws for the Traxxas T-Maxx 3.3.

FEATURES:
Black steel building

SUCHES AS:
6 steel shoulder screws

SPECS:
Length: 12mm
Size: 3mm

This product compliments the main item right here.

Steerng Bellcrnk Screws (R)

These are Replacement Steering Hardware from Traxxas.

FEATURES:
Metal construction.
Chrome draglink shoulder screws with a phillips drive.
Black guiding bellcrank shoulder screws with a hexagon socket drive.
Coarse thread.

INCLUDES:
(2) Bellcrank Screws
(2) Draglink Screws

SPECS:
Bellcrank Size: 3x30mm
Draglink Size: 3x5mm

Numerous others have actually purchased this product in addition to the product that you are currently reading about.

3 X 15Mm Button Hex Screw (6)

This is a plan of 6 3x15mm Traxxas Button Head Screws.

FEATURES:
Steel building, Black in color
Utilized on the Traxxas Revo beast truck, can also be used in any
    application where a 3x15mm button head screw is required

SUCHES AS:
6 3x15mm Traxxas Button Head Screws

REQUIRES:
2mm hex head wrench, GPMR8011

SPECS:
Length: 15mm
Size: 3mm

This product compliments the above discussed product.

3 X 20Mm Button Hex Screw (6)

This is a plan of 6 3x20mm Traxxas Button Head Screws.

FEATURES:
Steel building, Black in color
Utilized on the Traxxas Revo beast truck, can also be used in any
    application where a 3x20mm button head screw is required

SUCHES AS:
6 3x20mm Traxxas Button Head Screws

REQUIRES:
2mm hex head wrench, GPMR8011

SPECS:
Length: 20mm
Size: 3mm

Right here is a fantastic product that lots of others have actually purchased the same time.

3Mm Nyl Lock Nuts/12

These are 3mm Nylon Locking Nuts from Traxxas.

FEATURES:
Resilient metal building
Nylon inserts

SUCHES AS:
(12) Lock Nuts

SPECS:
Size: 3mm

Get this product to boost the one you read about.

Body Clip 90 Deg Angled (10) Revo

These are the replacement Body Clips for
the Traxxas Nitro Revo Beast Truck.

FEATURES:
Metal Construction
Silver in Color
Bent for Easy Elimination

SUCHES AS:
10 Bent Silver Metal Body Clips

REQUIRES:
Assembly onto Car

Get this product to boost the one you read about.

Shaft Slipper Clutch

This is a Slipper Clutch Shaft for the Traxxas Rustler XL
and Stampede XL.

FEATURES:
Steel building
_
Roll pin pre-installed

SUCHES AS:
One slipper clutch set

SPECS:
Length: 1.98" (50mm)
Size: .21" ( 5mm)

COMMENTS:
This part will fit both the standard and XL version of the Rustler
or Stampede.

Want an additional fantastic product to match the above pointed out product?

23T Pinion 48P

This is a 23 Tooth 48 Pitch Pinion Gear By Traxxas

FEATURES:
Pinion gear with set screw, Silver in color

SUCHES AS:
(1) 23 Tooth 48 Pitch Pinion Gear
(1) One 4mmx2mm set screw

REQUIRES:
Installation

SPECS:
Outer Size: 14mm (9/16")
Inner Size: 11mm (7/16")

Numerous others have actually purchased this product in addition to the product that you are currently reading about.

Stub Axle Pins (4)

These are replacement stub axle pins for the Nitro Buggy, Nitro Street, TRX-3,
Rad 2, TRX-1, Hawk 2, and Blue Eagle LS II. These pins slide through the axle
and hold the wheel to the axle.

INCLUDES:
4- stub axle pins

WAJ
1/30/94