Traxxas Lower Chassis (R)

Thids is the replacement lower chassis (or "tub" chassis) for the Traxxas
Rustler and Bandit. Made of black reinforced nylon and has a molded-in
channel down the center of the chassis for added strength and less flex.

PACKAGE
CONSISTS OF: One lower chassis.

COMMENTS:
Upper chassis is available individually, utilize TRAC9123.

This item is often gotten with the above mentioned item.

Upper Chassis (R)

    This is the Upper Chassis for the Traxxas Rustler and Bandit

FUNCTIONS:
Black Plastic Building and construction

CONSISTS OF:
One Chassis

REQUIRES:
Rustler

This item praises the main item below.

Steerng Bellcrnk Screws (R)

These are Replacement Steering Hardware from Traxxas.

FEATURES:
Metal construction.
Chrome draglink shoulder screws with a phillips drive.
Black steering bellcrank shoulder screws with a hexagon socket drive.
Coarse thread.

INCLUDES:
(2) Bellcrank Screws
(2) Draglink Screws

SPECS:
Bellcrank Size: 3x30mm
Draglink Size: 3x5mm

You will like this item if you have the item earlier pointed out.

Front A-Arm, For Traxxas Slash, Rustler, Stampede, Nitro Slash,

This is a set of optional Front A-Arms for the Traxxas
Electric Stampede and Rustler.

FEATURES:
Composite nylon construction, black in color
Direct fit hop-up requires no design adjustment for installation

CONSISTS OF:
2 Front A-Arms

REQUIRES:
Setup following the design manual

SPECS:
Length: 3.31" (84mm)
Width: .88" (22.5) at narrowist 1.52" (38.5mm) at largest

REMARKS:
For the blue variation of this part order RPMC8246

The listed below item also sets truly well with the item being talked about.

Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is a Wide Front Bumper for the Traxxas Rustler and Stampede.
The Bumper goes on the Front of the Car and Safeguards the Chassis.

FEATURES:
Long lasting Plastic Building and construction
Black in Color

CONSISTS OF:
One Bumper
One Group RPM Decal

REQUIRES:
Setup onto the Traxxas Rustler or Stampede.

SPECS:
Length: 2-3/4"
Width: 6-1/8"

REMARKS:
The Factory Number is #81162

The listed below item also sets truly well with the item being talked about.



This is the ST Racing Principles Aluminum Front Bulkhead
For the Traxxas Electric Stampede, Rustler, Bandit, or Slash 1/10 vehicles
and Nitro Slash.

FEATURES:
Made of aluminum, anodized silver in color

CONSISTS OF:
One bulkhead
2 M30x14mm Phillips head screws

SPECS:
Length: 2-7/8" (73mm)
Width: 1-3/32" (281mm)
Height: 1-17/32" (39mm)

REMARKS:
This bulkhead can be installed on
Traxxas Stampede 4X4 VXL 2.4GHz RTR
Traxxas Stampede XL-5 2WD RTR w/7C Battery & Battery charger
Traxxas Rustler VXL 2.4GHz RTR
Traxxas Rustler XL-5 2WD RTR
Traxxas Bandit VXL 2.4GHz RTR
Traxxas Bandit Extreme Sports XL-5 RTR
Traxxas Slash 4X4 VXL TQi/2.4GHz RTR
Traxxas Slash 2WD TQi 2.4GHz RTR
Traxxas Slash 4X4 Ultimate VXL TQi RTR
Traxxas Slash F-150 SVT Raptor 2WD TQi
Traxxas Nitro Slash