RPM Front A-Arm, For Traxxas Slash, Rustler, Stampede, Nitro Slash,

This is a pair of optional Front A-Arms for the Traxxas
Electric Stampede and Rustler.

FEATURES:
Composite nylon building and construction, black in color
Direct fit hop-up needs no design adjustment for setup

CONSISTS OF:
2|2} Front A-Arms

NEEDS:
Setup following the design manual

SPECIFICATIONS:
Length: 3.31" (84mm)
Width: .88" (22.5) at narrowist 1.52" (38.5mm) at largest

REMARKS:
For the blue variation of this part order RPMC8246

Want another wonderful thing to enhance the above discussed thing?

Rear A-Arms, For Traxxas Slash, Black

    These are the RPM Strong Rear A-Arms for the
2WD Traxxas Slash Brief Course Racing Truck.

FEATURES:
Nylon building and construction
Black in color
Really durable

CONSISTS OF:
2|2} Strong Rear A-Arms

NEEDS:
Setup on the automobile

SPECIFICATIONS:
Length: 95mm (3.7")
Width: 47mm (1.85")
Height: 10.5mm (0.41")

REMARKS:
Likewise available in Blue RPMC8472

This thing is frequently purchased with the above discussed thing.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Bandit

The Front axles fit into these bearing carriers.

FEATURES:
Black nylon building and construction

CONSISTS OF:
2|2} Front bearing (center) providers
2|2} RPM decals

NEEDS:
(4) 5x11mm bearings, if needed use (2) DTXC1547.

Want another wonderful thing to enhance the above discussed thing?



This is the ST Racing Solidified Sleek Steel Lock-nut Style Hinge-pin Set
For the Electric Traxxas Slash, Rustler, Stampede, and Bandit 1/10 trucks
and Nitro Slash.

FEATURES:
Tired of the stock hinge-pins revoking the A-arms? If you've
been running your Traxxas automobile long enough, you more than likely have
already experienced this issue. ST Racing Concepts Heat Treated
Sleek Steel Lock-Nut Style Hinge-Pin Set will resolve this issue
once and for all. CNC Machined from high-quality 12.9 grade carbon
steel, that is then heat treated for increase in toughness, and then
polished for ultra smoothness. Nylon insert lock-nut at each end of
the hinge-pin avoids the pins from ever coming loose. This is a
great upgrade for your Traxxas Slash, Stampede, Rustler. Sold as a
complete set of 8 hinge-pins and lock-nuts.

This set has black-colored locknuts.

INCLUDES:
Two 52mm hinge pins
Two 48mm hinge pins
Two 35mm hinge pins
Two 29mm hinge pins
8 lock-nuts

This thing praises the main item here.

Rear Bearing Carriers, For Traxxas Slash 2Wd, E-Rustler, E-Stamp

These are Optional Rear Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Bandit.
The rear axles fit into these bearing carriers.

FEATURES:
Black nylon building and construction

CONSISTS OF:
Two rear bearing (center) providers
Two RPM decals

NEEDS:
(4) 5x11mm bearings, if needed use (2) DTXC1547.

SPECS:
Height: 40mm (1.58")
Width at largest point: 15.4mm (0.61")

This thing praises the main item here.

Rear A-Arms, For Traxxas Elec. Stampede 2Wd, & Rustler, Black

These are the optional Rear A-Arms (Supension Arms) for the Traxxas
Electric Rustler and Electric Stampede.
These mount to the bulkhead and the hubs mount to it.

FEATURES:
Strong Nylon Building and construction
Black in Color
Pre-Drilled Shock Mounting Positions
For the Rear of the Electric Rustler and Electric Stampede

CONSISTS OF:
Two Rear Black A-Arms
One RPM Decal Sheet w/ Two RPM Brandings

NEEDS:
Assembly onto Vehicle.

SPECS:
Length: 4.04" (102.5mm)
Width at Bulkhead: 1.80" (45.5mm)
Width at Center: 1.11" (28.25mm)
Thickness: .31" (7.8mm)