Traxxas HOSS 4X4 VXL 1/10 Scale w/TSM Orange

The brand new Hoss 4X4 VXL unleashes extreme monster truck enjoyable with the speed and style just Traxxas can provide. Get a fistful of throttle and the Velineon 540XL motor delivers huge torque to wheelie on command and hold the front end high as long as you attempt. Pitch the Hoss into a turn and slide through sideways in a cloud of dirt—all 4 tires dig in and drive difficult no matter how rough the terrain, and the Traxxas Stability Management system keeps you in control. The rugged, reinforced pickup body covers proven efficiency tech, with Velineon brushless horsepower and sturdy shaft-driven 4WD. The Hoss delivers unrivaled adaptability as the aggressive Sledgehammer® tires blast through dirt, sand, mud, and snow. Drive harder, go faster, hang tougher—famous Traxxas durability is engineered into every part. Absolutely nothing stops the Hoss!

Model 90076-4: Hoss® 4X4 VXL: 1/10 Scale 4X4 Monster Truck, fully-assembled, water resistant electronic devices, Ready-To-Race®, with TQi™ 2.4GHz 2-channel radio system, Traxxas Stability Management®, VXL-3s speed control, 540XL brushless motor, and clipless painted ProGraphix® body.
Requires: battery and battery charger.

Many others have actually bought this item in addition to the item that you are currently checking out.

5000Mah 11.1V 3-Cell 25C Lipo Battery

5000mAh 11.1V 3-Cell 20C Lipo Battery

TRAXXAS CERTIFIED LIPO POWER! Traxxas Qualified iD-Equipped LiPo batteries are engineered to supply the punch and on-demand power for reaching the top speeds that Traxxas models are built to achieve. Traxxas Power Cell iD-Equipped LiPo batteries are engineered particularly to fit Traxxas models and optimize their complete efficiency potential. Only Traxxas gives you more of what you desire most: easy setup, a great cost, and the most speed and run time available.

Specifications:

Length: 135mm

Height: 28.5mm

Width: 44mm

Want one more terrific item to match the above mentioned item?

BATT/CHGER COMPLETER 2849

This item is frequently bought with the above mentioned item.

SCX24 Deadbolt 1/24th Scale Elec 4WD - RTR, Green

Key Functions:
• Consists of radio system, ESC and transmitter batteries
• Consists of motor and on-board LiPo battery
• Reasonable narrow-stance rock spider body in olive green or red
• Molded roll cage with sensible light bar
• Reasonable chauffeur figure and numerous other scale information
• Formally licensed KMC XD229 Machete Crawl wheels
• Formally licensed Nitto Path Grappler M/T tires (S30 compound, big block tread)
• Full-time 4WD
• Splined and sleeved front and rear drive shafts allow for maximum suspension travel while keeping the power to the wheels
• Steel front and rear axles, front stub axles and dogbones supply strength and durability
• Rugged steel C-channel frame rails with bracing keep everything stiff and aligned
• Front and rear axles consist of a two-piece, molded plastic solid axle style
• 3-Link front and 4-link rear suspension supply optimum handling
• Coil-over shocks with simulated reservoir and resilient plastic suspension links provide proven Axial crawling efficiency
• Front and rear differentials each house a worm gear setup to power the axles and produce higher ground clearance. Worm gear drive also supplies a low gear ratio to decrease torque twist
• Two LEDs in the front bumper for night driving
The SCX24™ Deadbolt™ 4WD is the first Axial® off-roader in 1/24 scale. At less than 8” long, it’s the best rig to bring on your hiking, outdoor camping, and other outdoor and indoor experiences — offering factory-assembled ease, scale looks, and confident handling on any trail.

Even new modelers driving the SCX24 chassis will be fully equipped to tackle tough climbs and rough tracks. Like the bigger SCX10™ chassis, this smaller version uses lots of steel elements — from the C-channel frame rails to the front and rear axles and dogbones. Even over off-road, mountainous, rocky and desert terrain, it has the strength to keep pushing onward and upward.

For the most reputable handling, the SCX24 chassis includes a three-link front and four-link rear suspension. The mix of coil-over shocks and resilient plastic suspension links delivers Axial-worthy crawling efficiency even at this small scale. The worm gear drive setup allows a high ground clearance plus a low gear ratio that lowers torque twist.

Powered by a consisted of 180-size motor and LiPo battery, the SCX24 Deadbolt flaunts proficiency and charisma on the tracks. Have a look at that Deadbolt body — with its narrow position, bulging hood, sensible chauffeur figure, and molded roll cage with sensible light bar. The realism continues right down to the ground, where you’ll discover licensed KMC XD229 Machete Crawl wheels wrapped in Nitto Path Grappler tires.

Adding a lot more to its newbie appeal, the SCX24 Deadbolt comes 100% complete and all set to run. Whatever needed for action remains in package: put together and finished car; Axial 2-channel 2.4GHz radio system with servo and ESC/receiver system; Dynamite® 88T brushed electrical motor and 350mAh two 7.4V LiPo battery; USB LiPo battery charger; and even 4 AA cells for the transmitter!

What's in package?
(1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck
    (1) Axial AE-6 ESC/receiver combination (set up)
    (1) Dynamite® 88T brushed electrical motor (set up)
    (1) Axial AS-1 steering servo (set up)
(1) Axial® AX-4 2.4GHz 2-channel radio
(4) AA transmitter batteries
(1) 350mAh Two 7.4V LiPo battery
(1) USB LiPo battery charger
(1) Product Manual




STEEL C-CHANNEL CHASSIS FRAME RAILS
Similar to the 1/10th scale SCX10™ platform, the SCX24™ chassis features rugged and sturdy steel c-channel frame rails with bracing to keep everything intact and aligned.
 

DYNAMITE® 88T BRUSHED MOTOR
The Dynamite 88T brushed electrical motor supplies the right amount of torque to assist rise high climbs. It's mated to a steel motor mount to keep flex to a minimum, which assists protect the equipments.
 


WORM GEARS
The front and rear differentials each house a worm screw and worm gear setup to get the power to the axles and produce higher ground clearance.
 

DURABLE STEEL AXLES
Steel front and rear axles, front stub axles together with steel dogbones supply strength and durability to keep things running during tough climbs and rough tracks.
 


SPLINED DRIVE SHAFTS
The front and rear drive shafts are splined and sleeved to allow for maximum suspension travel while keeping the power to the wheels.
 

COILOVER SHOCK ABSORBERS
Even at this small scale, the mix of coilover shocks with simulated reservoirs and resilient plastic suspension links delivers the crawling efficiency you have actually known and anticipate from Axial.
 


FRONT AND REAR SOLID AXLES
The front and rear axles consist of a 2 piece, formed plastic solid axle style. For optimum handling, the SCX24™ suspension includes a three-link front and four-link rear setup.
 


LED LIGHTS INCLUDED
Two bright LED lights are consisted of and are mounted in the front bumper. An additional LED light port on the ESC enables you to include optional LED lights.
 

4-LINK REAR SUSPENSION
The suspension geometry makes use of a 4-Link style for the rear which is enhanced to decrease axle steer and torque twist. We have actually also consisted of extra suspension links for adjusting your wheelbase length.
 


KMC XD229 MACHETE CRAWL WHEELS & NITTO PATH GRAPPLER M/T TIRES
Formally licensed KMC XD Machete wheels are famous in the off-road world. They are formed in black and feature spectacular scale information, regardless of the small scale.
The formally certified Nitto Path Grappler M/T Tires offer a great blend of off-road efficiency while still keeping exceptional composure for on-road usage.
 

HINGED BODY SYSTEM
The hinged body system provides easy access to on-board elements. You can rapidly reach the battery and chassis by eliminating simply two body clips and swinging the body up.
 


FULL BALL BEARINGS
Just because the SCX24™ is smaller in size does not imply the features require to follow suit. No bushings found here, instead the drivetrain is easily spinning on sealed cartridge bearings throughout the entire car.
 

AXIAL AS-1 SERVO
Mounted simply above the front axle is the Axial AS-1 servo, with a servo saver that allows for steering precision, while also providing security for the servo equipments in case of a bind or impact.
 

Specifications

Type: Spider
Scale: 1/24
Length: 7.8" (199.5mm)
Width: 3.9" (99.5mm)
Height: 4.73" (120.2mm)
Ground Clearance: 1.06" (27mm)
Wheelbase: 5.25" (133.5mm)
Weight: 0.5lb (0.22kg)
Chassis: Stamped steel rails
Suspension: Solid axle, front and rear
Drivetrain: 4WD
Tire Type: Nitto Path Grappler M/T, big block tread
Speed Control: AE-6 ESC receiver/combo
Radio: AX-4 2.4GHz 2-channel
Servos: AS-1 steering servo
Batteries: 7.4V 350mAh 30C LiPo (consisted of)
Charger: USB LiPo battery charger (consisted of)
Gear Pitch: 32-Pitch
Wheel Size: 0.48" (12.4mm) width, 1.0" (26mm) diameter
Kit/RTR: RTR
Shock Type: Plastic body coil-over .9 - 1.3" (24 - 33.4mm)
Body: Painted and cut Axial Deadbolt
Ball Bearings: Full body
Is Assembly Required: No