Traxxas Front Bulkhead (Black) Slash / Bandit / Rustler / Stampede

This is a Stock Replacement Front Bulkhead utilized in many Traxxas vehicles.
The front suspension arm hinge pins go through this piece.

FEATURES:
Black nylon building

INCLUDES:
One front bulkhead

REQUIRES:
Absolutely nothing. This is a direct replacement part.

SPECS:
Length: 73.6mm (2.90")
Width: 41mm (1.62")
Height: 29mm (1.14")

REMARKS:
This part is utilized on the following vehicles:
    Rustler, Outlaw, Stampede, Nitro Rustler, SRT, Nitro Stampede.

You will certainly enjoy this thing if you have the thing previously mentioned.

Tie Bar Fiberglass

This is a Firberglass Tie Bar by Traxxas for the SRT

FUNCTIONS:
Fiberglass Building

INCLUDES:
One Tie Bar

REQUIRES:
Suspension Pins (TRAC4940)

SPECIFICATIONS:
Length: 98.4 mm (3.875")
Width: 7.9 mm (0.3125")
Thickness: 2.0 mm (0.082")

REMARKS:
None

Below is a wonderful thing that numerous others have actually bought at the exact same time.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Outlaw

The Front axles suit these bearing carriers.

FEATURES:
Black nylon building

INCLUDES:
2 Front bearing (center) providers
2 RPM decals

REQUIRES:
(4) 5x11mm bearings, if required usage (2) DTXC1547.

Want another wonderful thing to match the above pointed out thing?

Skid Plates Front & Rear (S)

This is a replacement set of skid plates for the Traxxas Stampede.

FEATURES:
Made from black molded nylon
For the Traxxas Stampede

SPECIFICATIONS:
Length of front plate: 5 5/8"
Thickness of front plate: 3/16"
Width of front plate: 2 1/8"
Length of rear plate: 4 3/8"
Thickness of rear plate: 1/8"
Width of rear plate: 2 1/8"

INCLUDES:
(1) Front skid plate
(1) Rear skid plate
MDJ 3/25/95 ¦-)

The listed below thing additionally sets actually well with the thing being discussed.

Caster Blocks, For Traxxas Electric Slash, Stampede, Rustler, Ni

These are RPM 30° Front Caster Blocks for the Traxxas
Electric Stampede and Rustler.
These obstructs mount to the front A-arms and is exactly what the
guiding knuckles connect to.

FEATURES:
Nylon building, black in color
Stamped right and delegated insure right setup

INCLUDES:
2 RPM 30° Front Caster Blocks

REQUIRES:
Assembly in between A-arms and guiding knuckles

This thing praises the above discussed thing.

Front Shock Tower, For Traxxas Slash/Rustler/Stampede/Bandit

This is the optional RPM Front Shock Tower for the
Traxxas E-Stampede, E- Rustler, Outlaw & Nitro Stampede.

FEATURES:
Plastic building
Black in color

INCLUDES:
One Front Shock Tower for the Traxxas E-Stampede, E-Rustler, Outlaw
    and Nitro Stampede

REQUIRES:
Setup on the automobile

SPECIFICATIONS:
Width: 3.26" (83mm)
Height: 2.91" (74mm)
Thickness: .27" (7mm)

Several others have actually purchased this thing together with the thing that you are currently checking out.

Heat-Treated, Carbon Steel Front King-Pins, For Traxxas Slash /

This is a set of ST Racing Ideas Sleek Front King Pins
for the 1/10 scale 2WD Traxxas Slash.

FEATURES:
CNC machined, heat treated and polished steel building

INCLUDES:
Left and Right King Pins for front suspension

You will certainly enjoy this thing if you have the thing previously mentioned.

Suspension Pins 44Mm Slash Rustler / Stampede / Bandit

This is a set of chrome suspension pins utilized to hold the front suspension arms
on the TRAXXAS SRT, NITRO STAMPEDE, and NITRO RUSTLER.

Includes: 2 chrome suspension pins and three "E" type retaining clips.

Requires:nothing parts are a direct replacement.

Specs:3mm x 44mm pins are notched for the 3MM "E" type retaining clips at each
end. WLG 9-29-97