Traxxas Frnt & Rr Body Mounts Revo

This is the Front and Rear Body Installs with Body Post for the Traxxas Revo.

FEATURES:
Black plastic construction
"TRX" logo design on front body mount

INCLUDES:
Front and rear body installs Part #5314
Front and rear body post Part #5314
(4) 2.5X18mm screw pins
(1) 4X10mm button head screw

NEEDS:
Installation on the Traxxas Revo

Several others have actually acquired this product along with the product that you are currently checking out.

Body Mount Posts, Front & Rear

These are the Tall Front and Rear Body Mount Posts for usage on the
Traxxas Summit Truck

FEATURES:
Nylon construction
Black in color

INCLUDES:
Front and Rear Body Mount Posts

NEEDS:
Installation on the vehicle

The listed below product also pairs really well with the product being discussed.

Diff Ring Gear / Pinion Gear Revo

This is the Differential Ring Gear and Pinion
for usage with the Traxxas Revo 3.3.

FEATURES:
Direct replacement part

INCLUDES:
One differential ring gear
One pinion gear

NEEDS:
Traxxas Revo 3.3
2.5x8mm cap head screws (TRAC3965)

Want another great product to compliment the above pointed out product?

Bulkhead Rr L&R Halves Diff Retainer 4 X 14Mm Bcs (4) Revo

This is the Back Bulkhead for the Traxxas Revo.

FEATURES:
Black plastic construction
Rocker shafts preinstalled

INCLUDES:
Rear bulkhead halves Part #5329
(2) rocker shafts Part #5354
(4) 4X14mm button head screws

NEEDS:
Installation on the Traxxas Revo

The listed below product also pairs really well with the product being discussed.

Center Half Shafts E-Revo

This is the Center Half Shaft Set for the Traxxas E-Revo

FEATURES:
Plastic construction, black in color

INCLUDES:
Center half shafts (3 internal splined and 2 external splined)

NEEDS:
Installation on the vehicle

SPECS:
Size: 17.2mm (0.68")

Several others have actually acquired this product along with the product that you are currently checking out.

Bumper Frnt W/Mount 4 X 10Mm Bcs (2) 3 X 25Mm Bcs (2) Revo

This is the replacement Front Bumper and Bumper Mount for
the Traxxas Nitro Revo Monster Truck.

FEATURES:
Nylon Building
Silver Bumper and Black Mount

INCLUDES:
One Silver Nylon Front Bumper
One Black Nylon Front Bumper Mount
2 3mm x 25mm Cap Hex Head Device Thread Screws
2 4mm x 10mm Cap Hex Head Device Thread Screws

NEEDS:
Assembly onto Vehicle
2mm Hex Wrench, GPMR8011
2.5mm Hex Wrench, GPMR8012

This is a fantastic enhancement to the product currently being discussed.

Skid Plate Set Front & Rear Revo Summit

This is the Front and Rear Skid Plates for the Traxxas Revo.

FEATURES:
Black plastic construction
Front skid plate is a two-piece design
Rear skid plate is a one-piece design

INCLUDES:
Front and check out skid plates Part #5337
(8) 3X10mm button head screws Part #2577
(1) 3X30mm button head screws Part #2582

NEEDS:
Installation on the Traxxas Revo

Here is a great product that lots of others have actually bought at the exact same time.

High Volume Air Filter Assembl

This is the High Volume Air Filter Body
for the Traxxas Revo 3.3.

FEATURES:
Changes damaged or filthy air filter assemblies
Plastic body with foam component and rubber accessory pipe

INCLUDES:
Foam filter and pre filter, support cap, filter base and wire mount

NEEDS:
Air filter oil, DTXC2465

SPECS:
Total Height: 3.9" (100mm)
Filter Size: 1.6" (41mm)

You will certainly love this product if you have the product earlier stated.

Driveshafts, Summit & E-Revo Center E-Revo (Steel Constant-

These are the optional Center Driveshafts for usage on the Traxxas E-Revo.

FEATURES:
Steel construction
Constant-velocity
Inner and external dust boots

INCLUDES:
One Back Center Driveshaft
One Front Center Driveshaft

NEEDS:
Installation on the vehicle