Traxxas Diff Ring Gear / Pinion Gear Revo

This is the Differential Ring Equipment and Pinion
for use with the Traxxas Revo 3.3.

FUNCTIONS:
Direct replacement part

CONSISTS OF:
One differential ring equipment
One pinion equipment

REQUIRES:
Traxxas Revo 3.3
2.5x8mm cap head screws (TRAC3965)

This item is often acquired with the above mentioned item.

Gear Set, Differential

This is the Differential Equipment Set for the Traxxas Revo and E-Maxx.

FUNCTIONS:
Steel building

CONSISTS OF:
Two Output Gears
Two Spider Equipments
Spider Gear Shaft and Diff Carrier Support
Instruction Sheet

REQUIRES:
Diff lube;
10K weight TRAC5135 50K weight TRAC5137
30K weight TRAC5136 Multi-weight set TRAC9136

Regularly acquired with the item that you are presently reviewing.

6 X 12 X 4Mm Ball Bearing (2) Blue Rubber Sheild R Evo

This is a 6X12mm Ball Bearing Set from Traxxas.

FEATURES:
Steel building
Blue rubber dirt shields

CONSISTS OF:
(2) ball bearings, Part #5117

SPECS:
Inside size: 6mm
Outside size: 12mm
Width: 4mm

REMARKS:
This bearing set is utilized in the transmission and differentials of
    the Revo.

The below item additionally pairs truly well with the item being gone over.

Carrier, Differential (Heavy D

This is the Heavy Duty Carrier Differential for use on the
Traxxas Summit Truck RTR

FUNCTIONS:
Nylon building
Black in color

CONSISTS OF:
One Heavy Duty Differential Carrier
One Front and Back Linkage Arm
One Differential Fork
Two X-Ring Gaskets
One Ring Equipment Gasket
Two Bushings
One 6.5x10x0.5mm Washer

REQUIRES:
Installation on the vehicle

Lots of others have actually acquired this item along with the item that you are presently reviewing.

8 X 16 X 5Mm Ball Bearing (2) Blue Rubber Sheild R Evo

    These are the replacement Differential Bearings for
the Traxxas Nitro Revo Monster Truck.

FEATURES:
Stainless Building and construction
Blue Rubber Sealed

CONSISTS OF:
Two 8mm x 16mm Rubber Sealed Bearings

REQUIRES:
Assembly onto Car

SPECS:
Inner Size: 8mm (0.31")
Outer Size: 16mm (0.62")
Density: 5mm (0.19")

Get this item to enhance the one you read around.

Gear, Locking Differential Out

This is the Locking Differential Ouput Equipment for use on the
Traxxas Summit Truck RTR

FUNCTIONS:
Steel building

CONSISTS OF:
One Locking Differential Output Equipment
One Differential Slider
One 3x12mm Screwpin

REQUIRES:
Installation on the vehicle

This item is often acquired with the above mentioned item.

Diff Carrier / X-Ring Gaskets (2) / Ring Gear Gask Et/ 6 X 1

This is the Diff Carrier/Gasket Set for the Traxxas Revo.

FEATURES:
Plastic Diff Carrier
Blue Rubber Shaft Gaskets
Black Rubber Diff Carrier Gaskets
Gray Washer

CONSISTS OF:
One Diff Carrier
Two Blue Rubber Shaft Gaskets
One Black Rubber Diff Carrier Gaskets
One Gray Washer

REQUIRES:
Assembly to vehicle

Lots of others have actually acquired this item along with the item that you are presently reviewing.

Diff Housing Frnt & Rr Revo

This is the Front and Back Differential Housing
for the REVO from Traxxas.

FEATURES:
Long lasting black nylon building

CONSISTS OF:
One diff real estate (2 pieces)

REQUIRES:
TRAC5119 10x15mm Bearing (1)
    TRAC5118 8x16mm Bearing (1)
    TRAC5117 6x12mm Bearings (2)
    TRAC5381 Diff Carrier & Gasket
    TRAC3965 Cap Head Screw 2.5X8MM
    TRAC2587 Cap Head Screw 3X10MM
    TRAC5329 Rear bulkhead
    TRAC5330 Font bulkhead

You will love this product if you have the product previously stated.

Carrier, Differential Heavy Du

This is the Carrier Differential for the Traxxas Revo and E-Maxx.

FUNCTIONS:
Replaces worn diff providers gaskets and spacers

CONSISTS OF:
Diff Carrier and Gaskets, TRAC5381
Steel Spider Equipment Braces (not utilized with Revo)
Instruction sheet

REQUIRES:
Disassembly of differential, installing new parts and filling up with
    modeler's choice of diff lube
10K (TRAC5135) 50K (TRAC5137)
30K (TRAC5136) stock weight Complete set (TRAC9136)