Traxxas Esc Cooling Fan "V"

This is the optional Cooling Fan for the Traxxas Velineon
VXL-3 Electronic Speed control.

FEATURES:
Keeps your VXL-3 running cooler
Basic setup requires only snapping the fan housing on the
ESC and plugging in the port on the ESC to the fan

INCLUDES:
One Cooling Fan Unit with setup sheet

REQUIRES:
Installation following the consisted of instructions

SPECS:
Length: 1.56" (39mm)
Width: 1.34" (34mm)
Height: .83" (21mm) including clips - .47" (12mm) not including clips

Several others have purchased this product together with the product that you are currently reviewing.

Heat Sink Velineon 380 Motor Brushless, Aluminum Blue-Ano

This is the Aluminum Heat Sink for the Traxxas Velineon 380 Brushless Motor.

FEATURES:
Aluminum construction, anodized blue in color

INCLUDES:
Aluminum Heat Sink with tube of Thermal Paste and Instructions

Get this product to enhance the one you are reading about.

Motor Heat Sink

This is the original replacement motor heatsink for the Traxxas Bad guy IV.
AXY
4/8/92

Several others have purchased this product together with the product that you are currently reviewing.

Body Clips (12)

These are Replacement Traxxas Body Clips.
They can be used on Traxxas or most other brands of cars.

FEATURES:
Metal clips are silver in color

INCLUDES:
Twelve body clips

SPECS:
Length: aprrox. 7/8"

Often purchased with the product that you are currently reviewing.

Slash Big Bore Shocks

This is the optional Huge Bore Shock Set for the
2WD Traxxas Slash.
These change the plastic shocks that come stock with the kit.

FEATURES:
Strong aluminum construction, covered
Anodized black with white springs
Entirely assembled

INCLUDES:
4 completely assembled shocks with white springs
Mounting hardware
One bottle of silicone oil

REQUIRES:
Filling shocks with shock oil and assembling onto the design

This product praises the above gone over product.

Extended Fr/Re Body Mnts Slash 4x4

This is the optional Pro-Line Extended Body Mount Set for the
1/10 scale Traxxas Slash 4x4 Short Course Trucks.

FEATURES:
Adjustable front and rear body mounts permit a wide range of bodies
    to be used including rally car bodies
Constructed of nylon, black in color
Screw-on body mount system gets rid of metal clips

INCLUDES:
Front and Rear Body Mounts and Posts with Mounting Hardware

Several others have purchased this product together with the product that you are currently reviewing.

14T Pinion Gear 32P

This is a 14 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck.
This is the gear which is attached straight to the motor.

FEATURES:
Machined Steel
Created for a 3mm shaft

INCLUDES:
One 14 tooth Pinion Gear
One 3 x 4mm Set Screw

REQUIRES:
Assembly onto an E-Maxx truck.
1.5mm hex wrench to tighten set screw.

COMMENTS:
This gear is only one of 2 which are used on the E-Maxx double motor
    set-up.

You will like this product if you have the product just above pointed out.

Front Or Rear A-Arms For Traxxas Slash 4X4 And Rustler 4X4, Blac

These are the optional RPM Strong Front/Rear A-Arms
for the Traxxas Slash 4x4.

FUNCTIONS:
Black in color
Plastic constrution

INCLUDES:
Two Front/Rear A-Arms

REQUIRES:
Installation at front or rear suspension

SPECS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at largest point
Density: 0.31" (8mm)

REMARKS:
Likewise readily available in Blue (RPMC0705)