Traxxas 14T Pinion Gear 32P

This is a 14 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck.
This is the gear which is connected straight to the motor.

FEATURES:
Machined Steel
Designed for a 3mm shaft

CONSISTS OF:
One 14 tooth Pinion Gear
One 3 x 4mm Set Screw

NEEDS:
Assembly onto an E-Maxx truck.
1.5mm hex wrench to tighten set screw.

COMMENTS:
This gear is just one of 2 which are used on the E-Maxx double motor
    set-up.

Below is a wonderful product that lots of others have actually purchased the very same time.

12T Pinion Gear 32P

This is a 12 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck.
This is the gear which is connected straight to the motor.

FEATURES:
Machined Steel
Designed for a 3mm shaft

CONSISTS OF:
One 12 tooth Pinion Gear
One 3 x 4mm Set Screw

NEEDS:
Assembly onto an E-Maxx truck.
1.5mm hex wrench to tighten set screw.

COMMENTS:
This gear is just one of 2 which are used on the E-Maxx double motor
    set-up.

This is a fantastic addition to the product presently being talked about.

13T Pinion Gear 32P

This is a 13 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck.
This is the gear which is connected straight to the motor.

FEATURES:
Machined Steel
Designed for a 3mm shaft

CONSISTS OF:
One 13 tooth Pinion Gear
One 3 x 4mm Set Screw

NEEDS:
Assembly onto an E-Maxx truck.
1.5mm hex wrench to tighten set screw.

COMMENTS:
This gear is just one of 2 which are used on the E-Maxx double motor
    set-up.

Regularly purchased with the product that you are presently reviewing.

15T Pinion Gear 32P

This is a 15 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck.
This is the gear which is connected straight to the motor.

FEATURES:
Machined Steel
Designed for a 3mm shaft

CONSISTS OF:
One 15 tooth Pinion Gear
One 3 x 4mm Set Screw

NEEDS:
Assembly onto an E-Maxx truck.
1.5mm hex wrench to tighten set screw.

COMMENTS:
This gear is just one of 2 which are used on the E-Maxx double motor
    set-up.

Below is an additional product that praises the product being talked about.

Esc Cooling Fan "V"

This is the optional Cooling Fan for the Traxxas Velineon
VXL-3 Electronic Speed control.

FEATURES:
Keeps your VXL-3 running cooler
Basic setup requires just snapping the fan housing on the
ESC and plugging in the port on the ESC to the fan

CONSISTS OF:
One Cooling Fan System with setup sheet

NEEDS:
Setup following the consisted of guidelines

SPECIFICATIONS:
Length: 1.56" (39mm)
Width: 1.34" (34mm)
Height: .83" (21mm) including clips - .47" (12mm) not including clips

This is a fantastic addition to the product presently being talked about.

54T 0.8 P Spur Gear

This is the 54 Tooth Spur Gear
for the Traxxas Nitro Jato Arena Truck.

FEATURES:
Nylon construction
Black in color
.8 Module pitch

CONSISTS OF:
One 54T 0.8 Pitch Spur Gear

NEEDS:
Assembly onto automobile