Traxxas Driveshaft, Steel Constant-Velocity (Shaft Only, 160Mm), X-Maxx

These are the Front and Rear Motor Mounts
for the Traxxas X-Maxx Beast Truck, TRAD75**.

FUNCTIONS:
Two-piece molded composite plastic construction
Attaches to rear bulkhead and fastens to both ends of motor

CONSISTS OF:
Front and Rear Motor Mounts
Two Steel Pins

Numerous others have actually acquired this thing along with the thing that you are presently reading about.

Rebuild Kit, Steel Constant-Velocity Driveshaft (Includes Pins F

This is the Rebuild Package for the Consistent Velocity Driveshafts
    used on the Traxxas X-Maxx Beast Truck, TRAD75**.

FUNCTIONS:
Steel construction
Changes the pins and inserts that connects the #7750 continuous
    speed driveshaft to the #7753 stub axle

CONSISTS OF:
Two each, Pins and Inserts

Numerous others have actually acquired this thing along with the thing that you are presently reading about.

Stub Axle, Aluminum, Blue-Anodized (1), X-Maxx

This is the Aluminum Stub Axle
for the Traxxas X-Maxx Beast Truck, TRAD75**.

FUNCTIONS:
Aluminum construction, blue in color
Fits front and rear uprights
Splined for sure grip inside wheel centers

CONSISTS OF:
Aluminum Stub Axle

REMARKS:
4 are required per car

Often acquired with the thing that you are presently reading about.

Wheel Hex Clips (6), X-Maxx

These are the Wheel Hex Clips
for the Traxxas X-Maxx Beast Truck, TRAD75**.

FUNCTIONS:
Steel construction
Snaps onto groove of each stub axle to hold wheel center and uprights
    in place

CONSISTS OF:
6 Wheel Hex Clips

This is a wonderful addition to the thing presently being discussed.

Shock Caps, Gtx Shocks/ Spring Perch/ Adjusters/ 2.5X14 Cs (2) (

These are the Shock Caps for the Traxxas X-Maxx Beast Truck, TRAD75**.

FUNCTIONS:
Molded composite plastic construction
Steel ball link inserts in shock caps

CONSISTS OF:
Two each;
Caps
Spring Perches
Adjusters
2.5x14mm Cap Screws

Often acquired with the thing that you are presently reading about.

Suspension Arm, Upper (2), X-Maxx

This is a pair of Upper Suspension Arms
for the Traxxas X-Maxx Beast Truck, TRAD75**.

FUNCTIONS:
Molded composite plastic construction
Fits both front and rear suspension

CONSISTS OF:
Left and Right Upper Suspension Arms

Want one more wonderful thing to compliment the above stated thing?

Bumper Mount, Rear/ Bumper Support, X-Maxx

This is the Bumper Mount and Rear Bumper Support
for the Traxxas X-Maxx Beast Truck, TRAD75**.

FUNCTIONS:
Molded composite plastic construction

CONSISTS OF:
One each; Bumper Mount and Rear Bumper Support

This thing compliments the main item right here.

Suspension Pin Set, Front Or Rear Corner (Hardened Steel), X-Ma

    This is the Front or Rear Corner Suspension Pin Set
for the Traxxas X-Maxx Beast Truck, TRAD75**.

FUNCTIONS:
Steel construction
Fastens suspension arms to chassis and to front and rear uprights

CONSISTS OF:
One 4x85mm Pin
Three 4x47mm Pins
Two 4x33mm Pins

SPECS:
Diameter: 0.16" (4mm)
Length: 3.3" (85mm), 1.8" (47mm), 1.3" (33mm)

Here is a wonderful thing that numerous others have actually bought at the same time.

Suspension Pin Set, Shock Mount (Front Or Rear, Hardened Steel),

This is the Shock Mount Suspension Pin Set
for the Traxxas X-Maxx Beast Truck, TRAD75**.

FUNCTIONS:
Steel construction
Fastens bottom of shocks to lower front and rear suspension arms

CONSISTS OF:
Two each; 4 x 25.8mm Pins, 4 x 38mm Pins

SPECS:
Diameter: 0.16" (4mm)
Length: 1.01" (25.8mm), 1.5" (38mm)

Here is one more thing that compliments the thing being discussed.

Steering Blocks, Left & Right, X-Maxx

This is the Left and Right Guiding Blocks
for the Traxxas X-Maxx Beast Truck, TRAD75**.

FUNCTIONS:
Molded composite plastic construction
Holds stub axles in place, and connects toe connect to steering
    assembly

CONSISTS OF:
Left and Right Guiding Block