Traxxas Suspension Arm, Upper (2), X-Maxx

This is a set of Upper Suspension Arms
for the Traxxas X-Maxx Beast Truck, TRAD75**.

FEATURES:
Molded composite plastic building
Fits both front and rear suspension

CONSISTS OF:
Left and Right Upper Suspension Arms

This is a wonderful enhancement to the thing currently being talked about.

Suspension Arm, Lower (Left) (1), X-Maxx

This is the Lower Left Suspension Arm
for the Traxxas X-Maxx Beast Truck, TRAD75**.

FEATURES:
Molded composite plastic building
Fits lower left front suspension
Fastens to lower section of caster block and front lower bulkhead

CONSISTS OF:
Lower Left Suspension Arm

COMMENTS:
Not interchangeable with best side. For the Lower Right Suspension
    Arm, order TRAC7730.

Below is a wonderful thing that lots of others have actually bought at the exact same time.

Caster Blocks (C-Hubs), Left & Right, X-Maxx

This is the Left and Right Caster Blocks
for the Traxxas X-Maxx Beast Truck, TRAD75**.

FEATURES:
Molded composite plastic building
Supports the driveshaft and stub axles, and is kept in place by the
    upper and lower suspension arms

CONSISTS OF:
Left and Right Caster Blocks

The listed below thing additionally pairs actually well with the thing being talked about.

Steering Blocks, Left & Right, X-Maxx

This is the Left and Right Guiding Blocks
for the Traxxas X-Maxx Beast Truck, TRAD75**.

FEATURES:
Molded composite plastic building
Holds stub axles in place, and connects toe connect to steering
    assembly

CONSISTS OF:
Left and Right Guiding Block

Many others have actually bought this thing along with the thing that you are currently reviewing.

Suspension Pin Set, Front Or Rear Corner (Hardened Steel), X-Ma

    This is the Front or Rear Corner Suspension Pin Set
for the Traxxas X-Maxx Beast Truck, TRAD75**.

FEATURES:
Steel building
Fastens suspension arms to chassis and to front and rear uprights

CONSISTS OF:
One 4x85mm Pin
3 4x47mm Pins
2 4x33mm Pins

SPECS:
Diameter: 0.16" (4mm)
Length: 3.3" (85mm), 1.8" (47mm), 1.3" (33mm)

Want another wonderful thing to enhance the above pointed out thing?

Bumper Mount, Front/ Bumper Support, X-Maxx

This is the Bumper Mount and Front Bumper Support
for the Traxxas X-Maxx Beast Truck, TRAD75**.

FEATURES:
Molded composite plastic building

CONSISTS OF:
One each; Bumper Mount and Front Bumper Support

This thing is regularly bought with the above pointed out thing.

Bumper Mount, Rear/ Bumper Support, X-Maxx

This is the Bumper Mount and Rear Bumper Support
for the Traxxas X-Maxx Beast Truck, TRAD75**.

FEATURES:
Molded composite plastic building

CONSISTS OF:
One each; Bumper Mount and Rear Bumper Support

Want another wonderful thing to enhance the above pointed out thing?

Driveshaft, Steel Constant-Velocity (Shaft Only, 160Mm), X-Maxx

These are the Front and Rear Motor Installs
for the Traxxas X-Maxx Beast Truck, TRAD75**.

FEATURES:
Two-piece molded composite plastic building
Attaches to rear bulkhead and fastens to both ends of motor

CONSISTS OF:
Front and Rear Motor Installs
2 Steel Pins

This thing praises the above talked about thing.

Carriers, Stub Axle (Left & Right), X-Maxx

These are the Left and Right Rear Stub Axle Carriers
for the Traxxas X-Maxx Beast Truck, TRAD75**.

FEATURES:
Molded composite plastic building
Holds the 15x24x4mm and 20x27x4mm ball bearings in place and
    supports the rear stub axles

CONSISTS OF:
Left and Right Rear Stub Axle Carriers

This thing is regularly bought with the above pointed out thing.

Shock Shafts, Gtx, 110Mm (Assembled With Rod Ends & Hollow Balls

These are the Shock Shafts for the GTX Shocks
utilized on the Traxxas X-Maxx Beast Truck, TRAD75**.

FEATURES:
Steel building with composite plastic rod ends and pressed-in
    ball links

CONSISTS OF:
2 each; Shock Shafts with Rod Ends and Ball Hyperlinks