Traxxas Axle Carriers Left & Right (1 Ea) Revo

This is the set of Axle Carriers and Steering Blocks for the Traxxas Revo.
The axle carriers and guiding blocks support the stub axles and bolt
    to the upper and lower suspension arms at each wheel.

FEATURES:
Replaces damaged axle carriers and guiding blocks.
Constructed of black plastic.

INCLUDES:
One set of axle carriers and guiding blocks for the Traxxas Revo.

REQUIRES:
Bolting to each suspension arm, setting up two 12x18mm ball
    bearings, stub axles, and pillow balls.

Get this product to enhance the one you read around.

Driveshaft Assembly (1)

This is the Driveshaft Assembly for the Traxxas Revo 3.3.
and the T-Maxx 3.3.

FUNCTIONS:
Completely put together
Plastic telescoping driveshaft with steel universals
Blue rubber boot guards telescoping sections from dirt
Connects to the differential with one screw pin
Works on the front or back, right or left of car

INCLUDES:
#5458X Yoke, TRAC9798
#5145 Screw Pin, TRAC5145
#5450 Halfshaft, TRAC7450
#5452 U Joint, TRAC7452
#5459 Rubber Boot, TRAC7459
Instruction sheet

NEEDS:
Setting up on chassis

Get this product to enhance the one you read around.

12 X 18 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

    These are the replacement Wheel Center Ball Bearings for
the Traxxas Nitro Revo Monster Truck.

FEATURES:
Stainless-steel Building
Blue Rubber Sealed

INCLUDES:
2 12mm x 18mm Blue Sealed Stainless Wheel Center Bearings

NEEDS:
Assembly onto Car

SPECIFICATIONS:
Outer Size: 18mm (0.70")
Inner Size: 12mm (0.47")
Density: 4mm (0.15")

REMARKS:
These are for the Within of the Wheel Centers, the Truck Needs
Four Overall of these Bearings.