Traxxas 1/10 Slayer Pro 4x4 4WD Nitro-Power SC RTR TSM

This is the radiance powered, 2.4GHz radio managed,
Traxxas Slayer Pro 4WD Short Course Race Truck
with Traxxas Stability Management.

**The included TQi 2.4GHz radio system is compatible only with the**
**#6519 receiver and does DECLINE the Docking Base device.**

FEATURES:
Traxxas Stability Management (TSM): Superior tuning algorithms run on
    high-speed electronic elements to control wheel spin and steering
    instructions on loose dirt, concrete as well as ice and snow. TSM can be
    tweaked or switched off by changing the multi-function knob on
    the TQi transmitter or the slider in the Traxxas Link app
Chassis: Titanium anodized 6061-T6 aluminum 1/8" (3mm) thick 3D
    semi-monocoque with integrated roll hoop and bring deal with
Own: 4 wheel
Own Type: Shaft owned, shafts are .71" (18mm) size with
    half shafts and rubber shielded stub axle bearings
Engine: Traxxas .20 cu in (3.3cc) racing engine with slide valve
    carburetor and high circulation dual stage air filter with 60% more peak
    horsepower than the TRX 2.5 engine, EZ-Start electric starter and
    7.2V battery
Exhaust: Polished resonator dual chamber aluminum tuned pipe
Fuel Tank: Low profile 5.1oz (150cc) with flip leading cap
Radio: Traxxas TQi 2.4GHz high output with digital ball bearing
    steering servo, may be equipped with the Traxxas Link Wireless
    Module (not included, order TRAC6511) that turns an Android,
    iPad, iPhone or iPod Touch (sold individually) into a powerful tuning
    tool
Clutch: 2 shoe composite building and construction
Transmission: Automobile shifting large ratio two speed, forward only
Ball Bearings: Full set included, rubber sealed bearings used in all
    exposed places
Shocks: 4 GTR inboard mounted, maintenance totally free, silicone oil-filled
    tough anodized bodies with TiN shafts
Main Equipment: 38 tooth, formed plastic
Transmission: Sealed front and rear
Bumpers: Flexible molded front and rear tube style
Suspension: Linkage based for long travel and accurate tuning
    modifications and control
Differentials: Maintenance totally free, sealed with silicone X-rings and
    gaskets, minimal slip action can be tuned utilizing various viscosity
    oil
Brakes: Alloy calipers, huge 1.6" (40mm) size drilled and vented
    steel rotor and semi-metallic friction material
Tires: BF Goodrich Multi terrain, soft compound rubber
    1.6" (42mm) large, 4.3"
    (109mm) size with foam inserts
Wheels: Beadlock style 5-spoke satin chrome finish, 2.2" (56mm)
    outer size, 3" (76mm) inner size, 1.6" (41mm) large
Body: Traxxas ProGraphix pre-painted and cut with decals used
Bumpers: Front and back, plastic building and construction
Suspension: Variable progressive two rocker style, suspension travel
    not restricted to length of shocks, ride height, suspension travel
    and progressive rate can be changed absolutely independent of each
    other, rubber sealed pivot balls can be changed with included tool
    without removing seals, steel pivot ball maintaining rings
Caster: Adjustable, caster/toe-in describes the angle of the front
    suspension when viewed from the side of the car in relation to the
    chassis
Camber: Adjustable, camber describes the angle of the tops of the
    tires from vertical when when viewed from front or behind automobile
Steering: Ball bearing improved with twin high-torque servos driving
    a sturdy servo saver
Service warranty: 30 day warranty on electronic elements
    Chassis and engine are warranted devoid of problems at the date of
    purchase before use. No guarantees are revealed or implied that
    cover damage caused by typical use or wear, or cover or suggest
    how long any chassis or engine part will last before requiring
    replacement due to wear.

INCLUDES:
Traxxas Slayer Pro 4WD truck w/ oil-filled shocks, 3.3 engine, EZ-
    Start, painted body, tires, wheels, inserts, TQi 2.4GHz radio w/
    digital ball bearing steering servo, one standard servo, 15T clutch
    bell, 38T spur equipment, tool set, highlighted handbook, decals, two air
    filter aspects, filter oil, engine setup DVD, long travel rocker
    and spring set, TSM, 7.2V battery, 2A DC battery charger, extra radiance plug
    and fuel bottle

REQUIRES:
Fuel: Traxxas 10%-20% Top Fuel
AA Radio Batteries: 8, 4 for transmitter 4 for receiver

SPECIFICATIONS:
Automobile-
Length: 23.54" (598mm)
Width: 11.65" (296mm)
Height: 7.87" (200mm)
Weight: 7.78lb (3.53kg)
Wheelbase: 13.9" (353mm)
Front and Rear Track: 12.68" (322mm) outer edges of tires
Center Ground Clearance: 2.5" (63.5mm)
Equipment Ratio (1st Equipment): 15.75:1
Equipment Ratio (2nd Equipment): 10.05:1
    Body-
Length: 21.5" (546mm)
Width: 9.4" (238mm) behind front wheels, narrowest point
11.4 (290mm) at rear wheels, best point
Height: 5.5" (139mm)

COMMENTS:
The Slayer Pro 2.4GHz is offered in the following body colors;
    Black/Red #47, TRAD39LR Silver/Black #7, TRAD39SL
    Red/Black #25, TRAD39RL Silver #10, TRAD39SS

All initial bearings used in the Slayer Pro are rubber shielded.
The following list consists of the rubber shielded bearings and the
    non-shielded DuraTrax brand name as an affordable alternative.
For Replacement Ball Bearings use: DuraTrax Traxxas
Qty. Size Location Qty Bearing Set Qty Bearing Set
2 12x18mm Front Wheels (1) DTXC1597 (1) TRAC5120
2 6x12mm Front Wheels (1) DTXC1569 (1) TRAC5117
2 12x18mm Back Wheels (1) DTXC1597 (1) TRAC5120
2 6x12mm Back Wheels (1) DTXC1569 (1) TRAC5117
4 5x11mm Front Bulkhead (2) DTXC1547 (2) TRAC5115
4 5x11mm Back Bulkhead (2) DTXC1547 (2) TRAC5115
2 5x11mm Rocker Arm (1) DTXC1547 (1) TRAC5115
1 5x11mm Steering Arm (1) DTXC1547 (1) TRAC5115
1 5x8mm Steering Arm (1) DTXC1547 (1) TRAC5114
1 10x15mm Back Diff (1) DTXC1595 (1) TRAC5119
2 6x12mm Back Diff (1) DTXC1569 (1) TRAC5117
1 8x16mm Back Diff (1) DTXC1585 (1) TRAC5118
2 5x11mm Front Transmission (1) DTXC1547 (1) TRAC5115
2 5x11mm Back Transmission (1) DTXC1547 (1) TRAC5115
2 5x11mm Primary Shaft (1) DTXC1547 (1) TRAC5115
1 10x15mm Primary Shaft (1) DTXC1595 (1) TRAC5119
1 6x12mm Primary Shaft (1) DTXC1569 (1) TRAC5117
1 5x11mm Spur Gear/Pressure Plate (1) DTXC1547 (1) TRAC5115
2 6x12mm Output Shaft (1) DTXC1569 (1) TRAC5117
2 5x11mm Clutch Bell (1) DTXC1547 (1) TRAC4611