Manufacturer Description
This is the glow powered, 2.4GHz radio controlled,
Traxxas Slayer Pro 4WD Short Course Race Truck
with Traxxas Stability Management.
**The included TQi 2.4GHz radio system is compatible only with the**
**#6519 receiver and does NOT accept the Docking Base accessory.**
FEATURES:
Traxxas Stability Management (TSM): Superior tuning algorithms run on
high-speed electronic components to control wheel spin and steering
direction on loose dirt, concrete and even ice and snow. TSM can be
fine tuned or turned off by adjusting the multi-function knob on
the TQi transmitter or the slider in the Traxxas Link app
Chassis: Titanium anodized 6061-T6 aluminum 1/8" (3mm) thick 3D
semi-monocoque with integrated roll hoop and carry handle
Drive: Four wheel
Drive Type: Shaft driven, shafts are .71" (18mm) diameter with
half shafts and rubber shielded stub axle bearings
Engine: Traxxas .20 cu in (3.3cc) racing engine with slide valve
carburetor and high flow dual stage air filter with 60% more peak
horsepower than the TRX 2.5 engine, EZ-Start electric starter and
7.2V battery
Exhaust: Polished resonator dual chamber aluminum tuned pipe
Fuel Tank: Low profile 5.1oz (150cc) with flip top cap
Radio: Traxxas TQi 2.4GHz high output with digital ball bearing
steering servo, may be equipped with the Traxxas Link Wireless
Module (not included, order TRAC6511) that turns an Android,
iPad, iPhone or iPod Touch (sold separately) into a powerful tuning
tool
Clutch: Two shoe composite construction
Transmission: Auto shifting wide ratio two speed, forward only
Ball Bearings: Full set included, rubber sealed bearings used in all
exposed locations
Shocks: 4 GTR inboard mounted, maintenance free, silicone oil-filled
hard anodized bodies with TiN shafts
Main Gear: 38 tooth, molded plastic
Gearbox: Sealed front and rear
Bumpers: Flexible molded front and rear tube style
Suspension: Linkage based for long travel and precise tuning
adjustments and control
Differentials: Maintenance free, sealed with silicone X-rings and
gaskets, limited slip action can be tuned using different viscosity
oil
Brakes: Alloy calipers, giant 1.6" (40mm) diameter drilled and vented
steel rotor and semi-metallic friction material
Tires: BF Goodrich Multi terrain, soft compound rubber
1.6" (42mm) wide, 4.3"
(109mm) diameter with foam inserts
Wheels: Beadlock design 5-spoke satin chrome finish, 2.2" (56mm)
outer diameter, 3" (76mm) inner diameter, 1.6" (41mm) wide
Body: Traxxas ProGraphix pre-painted and trimmed with decals applied
Bumpers: Front and rear, plastic construction
Suspension: Variable progressive two rocker design, suspension travel
not limited to length of shocks, ride height, suspension travel
and progressive rate can be adjusted totally independent of each
other, rubber sealed pivot balls can be adjusted with included tool
without removing seals, steel pivot ball retaining rings
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when when viewed from front or behind vehicle
Steering: Ball bearing enhanced with twin high-torque servos driving
a heavy-duty servo saver
Warranty: 30 day warranty on electronic components
Chassis and engine are warranted free from defects at the date of
purchase before use. No warranties are expressed or implied that
cover damage caused by normal use or wear, or cover or imply
how long any chassis or engine part will last before requiring
replacement due to wear.
INCLUDES:
Traxxas Slayer Pro 4WD truck w/ oil-filled shocks, 3.3 engine, EZ-
Start, painted body, tires, wheels, inserts, TQi 2.4GHz radio w/
digital ball bearing steering servo, one standard servo, 15T clutch
bell, 38T spur gear, tool set, illustrated manual, decals, two air
filter elements, filter oil, engine setup DVD, long travel rocker
and spring set, TSM, 7.2V battery, 2A DC charger, extra glow plug
and fuel bottle
REQUIRES:
Fuel: Traxxas 10%-20% Top Fuel
AA Radio Batteries: 8, 4 for transmitter 4 for receiver
SPECS:
Vehicle-
Length: 23.54" (598mm)
Width: 11.65" (296mm)
Height: 7.87" (200mm)
Weight: 7.78lb (3.53kg)
Wheelbase: 13.9" (353mm)
Front and Rear Track: 12.68" (322mm) outer edges of tires
Center Ground Clearance: 2.5" (63.5mm)
Gear Ratio (1st Gear): 15.75:1
Gear Ratio (2nd Gear): 10.05:1
Body-
Length: 21.5" (546mm)
Width: 9.4" (238mm) behind front wheels, narrowest point
11.4 (290mm) at rear wheels, widest point
Height: 5.5" (139mm)
COMMENTS:
The Slayer Pro 2.4GHz is available in the following body colors;
Black/Red #47, TRAD39LR Silver/Black #7, TRAD39SL
Red/Black #25, TRAD39RL Silver #10, TRAD39SS
All original bearings used in the Slayer Pro are rubber shielded.
The following list includes the rubber shielded bearings and the
non-shielded DuraTrax brand as an economical alternative.
For Replacement Ball Bearings use: DuraTrax Traxxas
Qty. Size Location Qty Bearing Set Qty Bearing Set
2 12x18mm Front Wheels (1) DTXC1597 (1) TRAC5120
2 6x12mm Front Wheels (1) DTXC1569 (1) TRAC5117
2 12x18mm Rear Wheels (1) DTXC1597 (1) TRAC5120
2 6x12mm Rear Wheels (1) DTXC1569 (1) TRAC5117
4 5x11mm Front Bulkhead (2) DTXC1547 (2) TRAC5115
4 5x11mm Rear Bulkhead (2) DTXC1547 (2) TRAC5115
2 5x11mm Rocker Arm (1) DTXC1547 (1) TRAC5115
1 5x11mm Steering Arm (1) DTXC1547 (1) TRAC5115
1 5x8mm Steering Arm (1) DTXC1547 (1) TRAC5114
1 10x15mm Rear Diff (1) DTXC1595 (1) TRAC5119
2 6x12mm Rear Diff (1) DTXC1569 (1) TRAC5117
1 8x16mm Rear Diff (1) DTXC1585 (1) TRAC5118
2 5x11mm Front Gearbox (1) DTXC1547 (1) TRAC5115
2 5x11mm Rear Gearbox (1) DTXC1547 (1) TRAC5115
2 5x11mm Primary Shaft (1) DTXC1547 (1) TRAC5115
1 10x15mm Primary Shaft (1) DTXC1595 (1) TRAC5119
1 6x12mm Primary Shaft (1) DTXC1569 (1) TRAC5117
1 5x11mm Spur Gear/Pressure Plate (1) DTXC1547 (1) TRAC5115
2 6x12mm Output Shaft (1) DTXC1569 (1) TRAC5117
2 5x11mm Clutch Bell (1) DTXC1547 (1) TRAC4611
BOX DIMENSIONS: 13.00" W. X 9.13" H. X 26.75" L.
BOX WEIGHT: 12.30 LBS.