Traxxas 1/10 Slayer Pro 4x4 4WD Nitro-Power SC RTR TSM

This is the radiance powered, 2.4GHz radio managed,
Traxxas Slayer Pro 4WD Short Course Race Truck
with Traxxas Stability Management.

**The consisted of TQi 2.4GHz radio system works just with the**
**#6519 receiver and does NOT accept the Docking Base accessory.**

FEATURES:
Traxxas Stability Management (TSM): Superior tuning algorithms run on
    high-speed electronic components to manage wheel spin and steering
    instructions on loose dirt, concrete as well as ice and snow. TSM can be
    tweaked or shut off by changing the multi-function knob on
    the TQi transmitter or the slider in the Traxxas Link app
Chassis: Titanium anodized 6061-T6 aluminum 1/8" (3mm) thick 3D
    semi-monocoque with integrated roll hoop and bring handle
Drive: Four wheel
Drive Type: Shaft owned, shafts are .71" (18mm) size with
    half shafts and rubber protected stub axle bearings
Engine: Traxxas .20 cu in (3.3cc) racing engine with slide valve
    carburetor and high flow double stage air filter with 60% more peak
    horse power than the TRX 2.5 engine, EZ-Start electrical starter and
    7.2V battery
Exhaust: Sleek resonator double chamber aluminum tuned pipeline
Fuel Tank: Low profile 5.1oz (150cc) with flip top cap
Radio: Traxxas TQi 2.4GHz high output with digital ball bearing
    steering servo, may be geared up with the Traxxas Link Wireless
    Module (not consisted of, order TRAC6511) that turns an Android,
    iPad, iPhone or iPod Touch (offered independently) into an effective tuning
    tool
Clutch: Two shoe composite building
Transmission: Automobile moving large ratio two speed, forward just
Ball Bearings: Full set consisted of, rubber sealed bearings used in all
    exposed areas
Shocks: 4 GTR inboard installed, upkeep complimentary, silicone oil-filled
    hard anodized bodies with TiN shafts
Main Gear: 38 tooth, formed plastic
Transmission: Sealed front and rear
Bumpers: Versatile molded front and rear tube style
Suspension: Linkage based for long travel and accurate tuning
    changes and control
Differentials: Maintenance complimentary, sealed with silicone X-rings and
    gaskets, limited slip action can be tuned using different viscosity
    oil
Brakes: Alloy calipers, giant 1.6" (40mm) size drilled and vented
    steel rotor and semi-metallic friction material
Tires: BF Goodrich Multi surface, soft compound rubber
    1.6" (42mm) large, 4.3"
    (109mm) size with foam inserts
Wheels: Beadlock style 5-spoke satin chrome surface, 2.2" (56mm)
    external size, 3" (76mm) inner size, 1.6" (41mm) large
Body: Traxxas ProGraphix pre-painted and trimmed with decals applied
Bumpers: Front and back, plastic building
Suspension: Variable progressive two rocker style, suspension travel
    not restricted to length of shocks, ride height, suspension travel
    and progressive rate can be changed totally independent of each
    other, rubber sealed pivot balls can be changed with consisted of tool
    without getting rid of seals, steel pivot ball retaining rings
Caster: Adjustable, caster/toe-in describes the angle of the front
    suspension when viewed from the side of the vehicle in relation to the
    chassis
Camber: Adjustable, camber describes the angle of the tops of the
    tires from vertical when when viewed from front or behind automobile
Steering: Ball bearing enhanced with twin high-torque servos owning
    a sturdy servo saver
Warranty: 1 Month warranty on electronic components
    Chassis and engine are necessitated devoid of flaws at the date of
    purchase prior to use. No guarantees are revealed or suggested that
    cover damage brought on by typical use or wear, or cover or indicate
    for how long any chassis or engine part will last prior to needing
    replacement due to wear.

INCLUDES:
Traxxas Slayer Pro 4WD truck w/ oil-filled shocks, 3.3 engine, EZ-
    Start, painted body, tires, wheels, inserts, TQi 2.4GHz radio w/
    digital ball bearing steering servo, one standard servo, 15T clutch
    bell, 38T spur equipment, tool set, showed manual, decals, two air
    filter elements, filter oil, engine setup DVD, long travel rocker
    and spring set, TSM, 7.2V battery, 2A DC battery charger, extra radiance plug
    and fuel bottle

NEEDS:
Fuel: Traxxas 10%-20% Top Fuel
AA Radio Batteries: 8, 4 for transmitter 4 for receiver

SPECIFICATIONS:
Vehicle-
Length: 23.54" (598mm)
Width: 11.65" (296mm)
Height: 7.87" (200mm)
Weight: 7.78pound (3.53kg)
Wheelbase: 13.9" (353mm)
Front and Rear Track: 12.68" (322mm) external edges of tires
Center Ground Clearance: 2.5" (63.5mm)
Gear Ratio (1st Gear): 15.75:1
Gear Ratio (2nd Gear): 10.05:1
    Body-
Length: 21.5" (546mm)
Width: 9.4" (238mm) behind front wheels, narrowest point
11.4 (290mm) at rear wheels, widest point
Height: 5.5" (139mm)

COMMENTS:
The Slayer Pro 2.4GHz is readily available in the following body colors;
    Black/Red #47, TRAD39LR Silver/Black #7, TRAD39SL
    Red/Black #25, TRAD39RL Silver #10, TRAD39SS

All initial bearings used in the Slayer Pro are rubber shielded.
The following list consists of the rubber protected bearings and the
    non-shielded DuraTrax brand as an affordable alternative.
For Replacement Ball Bearings use: DuraTrax Traxxas
Qty. Size Location Qty Bearing Set Qty Bearing Set
2 12x18mm Front Wheels (1) DTXC1597 (1) TRAC5120
2 6x12mm Front Wheels (1) DTXC1569 (1) TRAC5117
2 12x18mm Rear Wheels (1) DTXC1597 (1) TRAC5120
2 6x12mm Rear Wheels (1) DTXC1569 (1) TRAC5117
4 5x11mm Front Bulkhead (2) DTXC1547 (2) TRAC5115
4 5x11mm Rear Bulkhead (2) DTXC1547 (2) TRAC5115
2 5x11mm Rocker Arm (1) DTXC1547 (1) TRAC5115
1 5x11mm Steering Arm (1) DTXC1547 (1) TRAC5115
1 5x8mm Steering Arm (1) DTXC1547 (1) TRAC5114
1 10x15mm Rear Diff (1) DTXC1595 (1) TRAC5119
2 6x12mm Rear Diff (1) DTXC1569 (1) TRAC5117
1 8x16mm Rear Diff (1) DTXC1585 (1) TRAC5118
2 5x11mm Front Transmission (1) DTXC1547 (1) TRAC5115
2 5x11mm Rear Transmission (1) DTXC1547 (1) TRAC5115
2 5x11mm Primary Shaft (1) DTXC1547 (1) TRAC5115
1 10x15mm Primary Shaft (1) DTXC1595 (1) TRAC5119
1 6x12mm Primary Shaft (1) DTXC1569 (1) TRAC5117
1 5x11mm Stimulate Gear/Pressure Plate (1) DTXC1547 (1) TRAC5115
2 6x12mm Output Shaft (1) DTXC1569 (1) TRAC5117
2 5x11mm Clutch Bell (1) DTXC1547 (1) TRAC4611