Traxxas 1/10 Slayer Pro 4x4 4WD Nitro-Power SC RTR TSM

This is the glow powered, 2.4GHz radio controlled,
Traxxas Slayer Pro 4WD Short Course Race Truck
with Traxxas Stability Management.

**The included TQi 2.4GHz radio system works only with the**
**#6519 receiver and does NOT accept the Docking Base device.**

FUNCTIONS:
Traxxas Stability Management (TSM): Superior tuning algorithms operate on
    high-speed electronic components to manage wheel spin and steering
    instructions on loose dirt, concrete and even ice and snow. TSM can be
    tweaked or turned off by changing the multi-function knob on
    the TQi transmitter or the slider in the Traxxas Link app
Chassis: Titanium anodized 6061-T6 aluminum 1/8" (3mm) thick 3D
    semi-monocoque with integrated roll hoop and bring handle
Own: 4 wheel
Own Type: Shaft driven, shafts are .71" (18mm) size with
    half shafts and rubber shielded stub axle bearings
Engine: Traxxas .20 cu in (3.3cc) racing engine with slide valve
    carburetor and high flow dual stage air filter with 60% more peak
    horsepower than the TRX 2.5 engine, EZ-Start electrical starter and
    7.2V battery
Exhaust: Polished resonator dual chamber aluminum tuned pipe
Fuel Tank: Low profile 5.1oz (150cc) with flip leading cap
Radio: Traxxas TQi 2.4GHz high output with digital ball bearing
    steering servo, might be equipped with the Traxxas Link Wireless
    Module (not included, order TRAC6511) that turns an Android,
    iPad, iPhone or iPod Touch (sold independently) into an effective tuning
    tool
Clutch: 2 shoe composite building
Transmission: Automobile shifting large ratio 2 speed, forward only
Ball Bearings: Complete set included, rubber sealed bearings utilized in all
    exposed locations
Shocks: 4 GTR inboard installed, upkeep complimentary, silicone oil-filled
    difficult anodized bodies with TiN shafts
Main Gear: 38 tooth, molded plastic
Gearbox: Sealed front and rear
Bumpers: Versatile molded front and rear tube design
Suspension: Linkage based for long travel and accurate tuning
    changes and control
Differentials: Maintenance complimentary, sealed with silicone X-rings and
    gaskets, minimal slip action can be tuned utilizing different viscosity
    oil
Brakes: Alloy calipers, giant 1.6" (40mm) size drilled and vented
    steel rotor and semi-metallic friction product
Tires: BF Goodrich Multi surface, soft substance rubber
    1.6" (42mm) large, 4.3"
    (109mm) size with foam inserts
Wheels: Beadlock style 5-spoke satin chrome surface, 2.2" (56mm)
    external size, 3" (76mm) inner size, 1.6" (41mm) large
Body: Traxxas ProGraphix pre-painted and trimmed with decals used
Bumpers: Front and rear, plastic building
Suspension: Variable progressive 2 rocker style, suspension travel
    not limited to length of shocks, flight height, suspension travel
    and progressive rate can be changed completely independent of each
    other, rubber sealed pivot balls can be changed with included tool
    without getting rid of seals, steel pivot ball retaining rings
Caster: Adjustable, caster/toe-in refers to the angle of the front
    suspension when viewed from the side of the cars and truck in relation to the
    chassis
Camber: Adjustable, camber refers to the angle of the tops of the
    tires from vertical when when viewed from front or behind vehicle
Steering: Ball bearing improved with twin high-torque servos owning
    a heavy-duty servo saver
Guarantee: Thirty Days warranty on electronic components
    Chassis and engine are necessitated devoid of problems at the date of
    purchase prior to use. No service warranties are revealed or suggested that
    cover damage triggered by normal use or wear, or cover or imply
    the length of time any chassis or engine part will last prior to needing
    replacement due to wear.

INCLUDES:
Traxxas Slayer Pro 4WD truck w/ oil-filled shocks, 3.3 engine, EZ-
    Start, painted body, tires, wheels, inserts, TQi 2.4GHz radio w/
    digital ball bearing steering servo, one basic servo, 15T clutch
    bell, 38T spur gear, tool set, showed manual, decals, 2 air
    filter elements, filter oil, engine setup DVD, long travel rocker
    and spring set, TSM, 7.2V battery, 2A DC charger, additional glow plug
    and fuel bottle

REQUIRES:
Fuel: Traxxas 10%-20% Top Fuel
AA Radio Batteries: 8, 4 for transmitter 4 for receiver

SPECS:
Vehicle-
Length: 23.54" (598mm)
Width: 11.65" (296mm)
Height: 7.87" (200mm)
Weight: 7.78lb (3.53kg)
Wheelbase: 13.9" (353mm)
Front and Rear Track: 12.68" (322mm) external edges of tires
Center Ground Clearance: 2.5" (63.5mm)
Gear Ratio (1st Gear): 15.75:1
Gear Ratio (Second Gear): 10.05:1
    Body-
Length: 21.5" (546mm)
Width: 9.4" (238mm) behind front wheels, narrowest point
11.4 (290mm) at rear wheels, best point
Height: 5.5" (139mm)

REMARKS:
The Slayer Pro 2.4GHz is offered in the following body colors;
    Black/Red #47, TRAD39LR Silver/Black #7, TRAD39SL
    Red/Black #25, TRAD39RL Silver #10, TRAD39SS

All initial bearings utilized in the Slayer Pro are rubber shielded.
The following list consists of the rubber shielded bearings and the
    non-shielded DuraTrax brand as an affordable alternative.
For Replacement Ball Bearings use: DuraTrax Traxxas
Qty. Size Location Qty Bearing Set Qty Bearing Set
2 12x18mm Front Wheels (1) DTXC1597 (1) TRAC5120
2 6x12mm Front Wheels (1) DTXC1569 (1) TRAC5117
2 12x18mm Back Wheels (1) DTXC1597 (1) TRAC5120
2 6x12mm Back Wheels (1) DTXC1569 (1) TRAC5117
4 5x11mm Front Bulkhead (2) DTXC1547 (2) TRAC5115
4 5x11mm Back Bulkhead (2) DTXC1547 (2) TRAC5115
2 5x11mm Rocker Arm (1) DTXC1547 (1) TRAC5115
1 5x11mm Steering Arm (1) DTXC1547 (1) TRAC5115
1 5x8mm Steering Arm (1) DTXC1547 (1) TRAC5114
1 10x15mm Back Diff (1) DTXC1595 (1) TRAC5119
2 6x12mm Back Diff (1) DTXC1569 (1) TRAC5117
1 8x16mm Back Diff (1) DTXC1585 (1) TRAC5118
2 5x11mm Front Gearbox (1) DTXC1547 (1) TRAC5115
2 5x11mm Back Gearbox (1) DTXC1547 (1) TRAC5115
2 5x11mm Main Shaft (1) DTXC1547 (1) TRAC5115
1 10x15mm Main Shaft (1) DTXC1595 (1) TRAC5119
1 6x12mm Main Shaft (1) DTXC1569 (1) TRAC5117
1 5x11mm Spur Gear/Pressure Plate (1) DTXC1547 (1) TRAC5115
2 6x12mm Output Shaft (1) DTXC1569 (1) TRAC5117
2 5x11mm Clutch Bell (1) DTXC1547 (1) TRAC4611